Search the Community

Showing results for tags 'remote screen'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 58 results

  1. Omron NA5 Screen Saver - Custom Image

    Good afternoon, I'm trying to add a custom image to the screen saver on the NA5 HMI, has anyone had experience with this? I can get to the screen saver setting on the device but there's only "Blank" screen as default, but I'd like to add my own image instead. Can anyone help? Thanks!
  2. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  3. Twin HMI screen set up

    Hi, I am trying to set up a Twin HMI system on a machine. (screens on each side mirror each other during operation) I have a GE Versamax Micro Controller PLC and two 10” Quickpanel+ HMI screens. This is a newer version of one of our older systems that operated in the same way, the only physical difference is the serial cable arrangement as the old system used 8” Quickpanel HMIs with different connectors. HMI 1 is connected from COM1 via RS232 serial cable to Port1 on PLC. (Connects and interacts with PLC ok individually) HMI 2 is connected from COM2 via RS485 serial cable to Port2 on PLC. (Connects and interacts with PLC ok individually) There is a Cat 5 Ethernet cable between the HMIs. The software for the old system works with the new set up and the ViewNetwork consoles on the HMI screens appear behind the ViewRuntime and display the neighboring Target screen and their IP connection details. I have adapted our latest single screen machine software into a Twin screen version in the same way as the old software as far as I can see but with the newer software the ViewNetwork consoles are blank with No target connections. Each screen interacts with the machine ok but they do not mirror last data or page selected from the other screen etc. as the old version did. I have been through all the options I can find in the old software and set the new software the same but with the same blank ViewNetwork console. What settings do I need to adjust to enable each HMI to mirror the other and see each other through the ViewNetwork consoles. Any help will be greatly appreciated. Thanks in advance,
  4. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  5. Remote reset R08 PLC from HMI

    Hi , I would like to perform remote reset the R08 PLC from the HMI in order to reset the communication. Please let me know, if there is a way to reset the Modbus port as well. Thanks in advance !!!
  6. Remote reset R08 PLC from HMI

    Hi , I would like to perform remote reset the R08 PLC from the HMI in order to reset the communication. Please let me know, if there is a way to reset the Modbus port as well. Thanks in advance !!!
  7. Troubleshooting NS8 Hmi

    Good day sirs, i would like to see your help with this our company owns multiple HMI Omron NS8 it seems that this unit always break in the site. we fixed one of the unit but it is only showing white screen is this possible that there no CF connected inside the HMI? ( note i was newly hired by the company wanting to help my superiors) thank you in advance everyone
  8. Nematron DOS software

    We have an older Nematron system we are working on and requires some software. The system uses DOS 6.22 and launches Screen Ware 2 software and the Reliance DCS V1.01 to talk to the Rockwell AutoMax PLC that uses the Programming Executive Version 4.2. We have the Nematron parallel port keys (dongle) needed and are looking for installation media for editing. We also need information on the executables that open the screen files the ULTRA MAIN MENU is not available to us. We are interested in viewing the config for upgrade so even software that is newer and capable of converting and reading the program is fine. Any help is appreciated!!
  9. Hi, I would like to know how can I change screen using PLC program for the HMIST6400.
  10. Hi,   I am attempting to download a Vijeo designer application to a remotely situated Magelis HMI over the cloud by means of a VPN. Vijeo designer's built-in help indicates that this is possible and has provided an example.  BTW, I am using Vijeo Designer basic v1.1 & the HMI model is GXU3512.   However, I find the fields for router IP and TCP port nos. all deactivated  
  11. Hello Everyone I am new on this forum. As an electrician in Denmark, I have just gotten a fountain to maintain. The control cabinet and pumps are all underground in a couple of wells.   There are a lot of monitoring and time is spend / wasted lifting the heavy manhole covers and driving to and from the wells. I would like to install a plc to monitor the few settings I really need. Are there some with experience of how and what type of equipment?  I am considering a siemens LOGO with a communications module and just buy a sim card.  Is it better to use prepaid 2G, 3G or 4G or only data sim card?  Also with or without pin code? It is not possible to establish a wired communication connection but the wells have of course 230 V mains and is very close to a phone tower. Yours faithfully Morten Lund
  12. Hello, I would like to know the best option for adding remote I/O stations to either the R32CPU or R32ENCPU. I like the look of the Mitsubishi NZ2FT / Weidmuller u-remote slice I/O. I believe they are the same product. There are CC-Link IE TSN network couplers for these systems. Would either of these be a good choice? I see the R32CPU has a port supporting CC-Link IE Field Basic. Can I communicate with CC-Link IE TSN devices using this port? The R32ENCPU add a couple of ports which can support regular TCP/IP communications, CC-Link IE Field and CC-Link IE Control. Do these ports also support communications with CC-Link IE TSN devices? Is there a difference between CC-Link IE Field Basic and CC-Link IE Field? Thanks,
  13. I need to change the screen when a specific block receive a signal. For example when Q output changes voltage state from 0 to 1 I need to automatically go to another screen. I am very new to the software so detailed explain will be more helpful. Thank you.
  14. Remote Omron and Yaskawa control

    Information : On the websites - https://abrysshost.web.app (and https://abrysshost .firebaseapp.com ) detailed information about the construction of remote diagnostics and control (Iot) systems for control systems of objects based on OMRON and Yaskawa controllers. The information is presented in Russian and English.
  15. Hi, I am using IQ-R Series "R16ENCPU" With Inbuild CC-LINK IE FIELD "RJ71EN71" and attached CC-LINK "RJ61BT11". Problem is, Even though my remote IO cards are in Online connected with masters, I cannot able to On/OFF Remote Device station IOs in CC-Link IE FIELD network. But CC-Link Normal is working fine. Refresh settings and Network Config Settings are done, Below attached the pics for reference. I cannot able to find the problem, Can anyone help me in this.  
  16. Are you working with networks for automation – and operational technology? Are you involved in planning, commissioning or maintaining industrial networks? We are looking for experts for operational technology networks like you for an online interview. We want to understand, how you work, what steps you take while working with your network/s and what you need to work well. The remote interview is going to take around 120 minutes and should take place between 09/14 and 09/30. For your time expenditure you will get a compensation of 200€. The interview will take place online via Zoom or Teams. We are counting on your support as an expert. If you are interested I am looking forward to your response, either via this forum or via eMail to j.walter@custom-interactions.com Let me know if you have any further questions! :)
  17. Remote GOT (Visual Only)

    Good morning everyone! I have a GOT HMI all fully fuctional and working a treat, I have been asked to display one particular screen remotely in another part of the factory. I can only really use the IP network or perhaps some sort of wireless link. Does anyone have any good ideas. I thought use another GOT like a dumb device just looking at that one particular screen. But I dont think one would be able to get the GOT to share its stuff down the IP. I could perhaps use the other GOT to VNC but I am not sure of that as if we are not on the Home Screen that could be a problem.   Any help appreciated.        
  18. Hey guys, I did a quick search here and didn't come up with anything, so hoping I'm not asking something that has already been answered. I'm looking at automating an existing plant which currently has zero controls, so starting from scratch. The process isn't complicated but the equipment is a bit spread out over a two story facility. We're thinking about using a CompactLogix 1769-L32, physically located as central as possible, with ten four-slot 1734 Point I/O blocks. My concern is that many Allen Bradley controllers limit the number of I/O modules you can add to the project. Like some 1756 controllers are limited to 30 local and remote I/O modules, CompactLogix controllers may be limited to 16 local and who knows how many remotes, etc. I can't find anything that spells it out explicitly in the Design Considerations Manual. The CompactLogix 5370 User Manual only says it supports, "a limited number of Point I/O modules that can be used as local modules". Nothing about networked modules. The CompactLogix Selection Guide clearly defines the number of network nodes, but nothing about the number of modules. Does anyone have any direct experience with this much Point I/O in a CompactLogix environment? I'm thinking that we're in an age of counting nodes, rather than modules but don't want to order the hardware without being 100% sure.
  19. Good Morning, I connect using a TCPSocket a remote node with my NJ501-1300. In order to test communication with the remote node I use a telnet communication and send from it messages to the remote node: it work correctly opening the connection and then sending all messages I want; the connection will close only at the end of the communication session. WHAT HAPPEN ON NJ? On NJ Open connection whit remote node; Connection is open; Send first message to remote node; Receive correct answer from remote node; Send another ore the same message to remote node; Receive an unknown command answer from remote node. WHY??? To solve previous problem I need to: Close the open connection; Wait the time to reopen it; Reopen connection; send the message; receive the correct answer from the remote node; Close connection Wait the time to reopen it; Reopen connection; send the message; receive the correct answer from the remote node; close connection and so on... Could someone help me to solve this problem opening the connection only once and then close it at the end of the end of communication session?!   THANK YOU
  20. Greetings I have an HMI in the form of an industrial PC, is ok to use an SC09 programming cable (8 pin DIN mini to USB type) as a permanent means of communicating between the FX3U PLC and industrial PC's USB port?   I am avoiding going through the trouble of buying a DB9 connector type for the PC end due to budget limitation. My CPU also doesn't have an ethernet card, i don't want to buy one either. i have already tested the connection and it works, i just want to understand the drawbacks of communicating via USB instead of ethernet or traditional serial.
  21. The C-More remote HMI app on APP Store, Google Play and Amazon is now available free. The nominal charge has now been removed.https://www.automationdirect.com/c-m...ity/remote-appHere is how to set up the EA9 C-More for remote use.https://accautomation.ca/c-more-ea9-...remote-access/Regards, Garry  
  22. Control Panel

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
  23. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  24. Cloud computing is a core component of the industrial Internet, and enabling devices to implement cloud management is an inevitable trend in the development of modern industry.   Haiwell Cloud BOX is a powerful and low-cost "Haiwell Cloud HMI without screen" created by Haiwell company after a lot of market research and engineering tests, which combines Haiwell engineers' excellent experience in Internet innovation technology and responds to the market demand of industry 4.0.     What is the cloud box? What powerful features does it have? ●  Built-in Haiwell cloud engine, integrated Haiwell cloud service, support cloud/mobile access control ●  Integrated HMI function, which can directly monitor the display screen through the mobile phone/PC instead of the HMI screen. The control is flexible and convenient. ●  Support A/B Key security mechanism, multi-unit network, database, multi-screen interaction, cloud camera remote monitoring,etc. ●  Support Haiwell Could SCADA cloud configuration software ●  Two Ethernet interfaces support star, tree, and bus Ethernet networking ●  Support MQTT protocol, support access to database server, easily realize data collection and reporting, connect to ERP/MES and other systems.         Haiwell Cloud BOX is a small, versatile and cost-effective " Cloud HMI without screen". Next, we will introduce how Haiwell Cloud BOX realize the Industry 4.0 Smart Factory solution. The above picture shows the device distributed in Beijing, Shanghai, Xiamen, New York and other places around the world. The remote monitoring of mobile APP and cloud website can be easily realized through Haiwell cloud platform, and remote PLC, HMI, CBOX and IPC projects can be upload and download remotely. The device supports the cloud alarm function, which can receive the alarm push information at the first time of the mobile APP or website if the field device has an alarm message,support cloud map, device location distribution can be viewed directly.   Smart Factory focuses on data integration in different places and realize unified monitoring and management. All cloud devices of Haiwell support MQTT protocol, and transmits it to the MQTT server via the Internet. The remote center database stores the sent data for ERP and MES system calls.   Smart factories value centralized monitoring and display. Haiwell cloud camera can easily realize remote monitoring of video; large screen controller TVBox can realize single screen and multi-screen in one display, and then display the screen and video monitoring of various places on the big screen through the Haiwell cloud platform to realize large screen electronic board function.   Smart factory focus on the secondary development of data variables in different places . Haiwell cloud configuration software can flexibly call variable data of devices in different places through the cloud platform to conduct secondary development configuration, making network monitoring more convenient for engineers.   The above is the introduction of Haiwell Smart Factory solutions, please look forward to more solutions of Haiwell industry 4.0 and intelligent manufacturing !   For more details, please refer to our company webstie:  http://en.haiwell.com/news/722-en.html My Wechat/ Whatsapp:  0086 15880530763  
  25. Remote Run/stop on FX0

    Hello, I'm working on a project where I'm trying to create Remote Acces to old PLC's. The Mitsubishi FX0-20MR-ES is one of those PLC's. I got the remote access working by using a Serial to Ethernet converter, but I just found out that FX0 serie can only be put in Run or Stop mode by manually flipping the RUN/STOP switch on the PLC. I was wondering if there is any software solution that enables me to "simulate" the stop function while the switch is still set on RUN. That way I can still program the PLC from a remote location. I know this is possible with some PLC's by turning off a whole registry in the software, that way the PLC thinks it is in STOP while it's actually still running. I just don't know how this would work with the FX0. I hope someone can give me the solution I'm looking for. I'm looking forward to the reactions, Jimmy