Search the Community

There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf

Hi guys,     I am trying to make a controller for an oven using MODBUS with a CP1L and an NB screen. My oven program will have 10 stages in one baking cycle, and the parameters for each stage can be modified individually (temperature, blower speed and time). I have set my number input in the NB screen to be a unsigned int of 2 integers and 2 decimals, and it writes to H4 in plc H memory. I move this value from H4 to W4 in the PLC, and input W4 into a timer (T0000). I have tried data manipulation and still have no success in getting this to work properly. My CP1L timer is set to BCD mode, as I am using premade MODBUS function blocks which are programmed with timers in BCD mode. Does anyone have any pointers regarding this? In the screenshot provided, the number i inputed in the HMI was 60.00.

hello,,,, i want to ask, is there a way to convert the yaskawa PLC ladder program to a Mitsubishi PLC? and what software is used to program PLC brand of YASKAWA?

Hello, Completely new to Mitsubishi PLCs and I need to use a date and time stamp for data collection purposes. We have a Siemens PLC as well and this has the data type "Date_And_Time" which is what I need to replicate. I have been attempting to write my own data type but am struggling with how to go about this as it is not straightforward and I cannot find anything about how the Siemens Date_And_Time is made up so I have nothing to go off. Does anyone have an example of a data type they have made that is the same? Or is there a data type which does this already in GX Works 2 that I just can't seem to find?  Please help!

Hello - I am currently setting up a program to control a downlane conveyor motor and ran into the issue of operators leaving the conveyor on through their breaks/at the end of the shift.... I know, shocking . Anyways, the essentials of the program are the following - ladder logic, start/stop PB station, a sensor that says when I've seen a box for x-amount of time I will turn off, when the eye is clear for x-amount of time I will turn back on. When trying to 'solve the problem' of the operators leaving them on, I figured this would give me a chance to use a RTC (real time counter) and program it so that at various times of the day I will send a single shot to verify the relay is CT is open. I've enabled the RTC on the Micro810, dropped a TOW but do not really understand how to set the TOW block up. Hopefully that all makes sense. Thanks,  grubb

Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?

Haiwell PLC programming software- HaiwellHappy View File HaiwellHappy Programming Software Features HaiwellHappy is the programming software for Haiwell PLC. It accordance with IEC 61131-3 standard, supports  built-in simulator and three kinds of programming languages (LD-Ladder Diagram, FBD-Function Block Diagram and IL-Instruction List). It can run on the systems of Windows 98, Windows 200X, Windows XP and the later Windows versions.   **  You can get the latest version from Download center for free **     HaiwellHappy Features     l Haiwell Cloud Programming Support Haiwell Cloud platform, can use Haiwell cloud to do remote programming for Haiwell PLC as upload/download, firmware upgrading, self-diagnosis, monitoring and debugging. Easy for remote connection and real-time data monitoring of the site. Also you can do local programming through a HMI which supports built-in cloud engine. l Built-in PLC simulator Haiwell PLC programming software supports internal simulator, realizing the PLC program run in the simulation. During programming or the programming is completed, you can run PLC program in the simulation without online to check the program execution is correct or not. It can reduce on-site commissioning time greatly, reduce debugging difficult and improve debugging efficiency. l Communication simulator It is used to the debug communication instruction simulation tools. It can be manually input simulately response message returned from salve, or you can use the computer's serial port to communicate with salve really, Simulate the process that PLC executes communication instruction really and process the return data from the salve.  l Interpolation simulator Track and draw the trajectory generated from motion control instructions such as the linear interpolation, circular interpolation, listing parameters of the pulse output channel of the motive plane and corresponding to each axis, display the current position of the channel, the mechanical home position, output mode, you can set shaft length, unit pulses. l PLC executable file Generation PLC program can be generated to executable file which is released and executed independently. So you do not need to send the PLC program to the user, it can be very easy, very safe to put the PLC excutable file to the user to download, but do not worry the user would can see the program content. l Innovative convenient instruction sets On the basis of analysis and absorption of various PLC instruction, Haiwell PLC launched many powerful innovations facilitate instruction. As communication instruction (COMM, MODR, MODW, HWRD, HWWR), data portfolio diversification instruction (BUNB, BUNW, WUNW, BDIB, WDIB, WDIW), PID control (PID), valve control (VC), upper and lower alarm (HAL, LAL), range transmitter (SC), temperature curve (TTC) etc. Any one instruction can realize the function but other PLC required to multiple instructions. These instructions are very easy to understand and use, greatly improve the programming efficiency and running speed. l Modular project structure Create 63 blocks total (main program, sub program, interrupt program) and chose any programming language to program. The execution order of block can be adjusted at random. Each block can be imported and exported independently and has the same password protected of program projects. So we can fully realize the modular programming and program reuse dreams. l Convenient instruction form Provides multiple instruction tables. Use these tables can reduce the amount of programs, saving program space, such as initialization data. Each table can be imported and exported independently and has the same password protection of program project. l Powerful online networking Search out all the PLC that connect with the PC. Show running status, fault status, RUN / STOP switch position, hardware configuration information, communication port parameters such detailed information of all the online PLC. Select any PLC for online monitoring, program download, firmware upgrade, controlling PLC stop, adjusting PLC real-time clock, modifying password protection, modifying communication port parameters, modifying the watching-dog time and PLC station names. l Online monitoring and debugging functions Provide 10 pages of component’s monitoring table. It can choose in decimal, hexadecimal, binary, floating point and character to display data. Support component and register component monitoring hybridly and displaying component annotation at the same time. All instruction tables can be imported to the monitoring table. l Unique real-time curve functions Monitor any of the register elements of its real-time curve, convenient to control and debug during the process. l User friendly input method Provide shortcuts, drag and drop, click and many other command input. Suggest effective components or range of values for each input and output terminals. It can be entered directly. Some data of combination (such as communication protocols etc.) can also double-click the instruction to configure the input data. l Convenient annotation Provide the component comment, network comment, instruction comment, block comment, table comment, and project comment. After the component with “//” to input comments directly (e g.: X0 // motor start).Comments can choose to download to the PLC for reading or modification facilitately. l Detailed tips and online helps Provide PLC resource window, instruction window, etc. All the instructions and detailed description of hardware modules can be found in powerful online help system which is open through clicking F1 key in the programming interface to find the answer. Even if use HaiwellHappy programming software for the first time who can easily complete the preparation of control program. l Convenient editing functions Support all conventional editing operations, searching and replacing, instruction up and down, network up and down, copying and pasting between program projects. l Hardware configuration, sub program parameter passing, local components, indirection, print, preview, debugging, CRC calculation, password protection, etc. Submitter Haiwell Submitted 03/18/19 Category Other PLC Demo Software

Hello all   I have OMRON PLC CP1E-E10DR-A.  I installed CX programmer , where I unable to connect the PLC.Driver successfully installed. In the software , i unbale to connect, there is no option for choosing E10DR, Th software has option of choosing E20 and above. Can anybody help in this?   Thanks

Dear all I am very new to PLC and having knowledge in embedded C program.I would like to start learning PLC programming.  I have OMRON CP1E-E10DR-A , It detected in my computer. I want suggestion recommendation on that which software will be chosen to work with this PLC. Please help me. Thanks

OK,  I have a program in a Control Logix 5561 controller(ver. 19.52) that every time we go online with it, the communication between the PLC and the PC running RS5000 is so slow you cannot navigate the program efficiently. I am new to this facility but I noticed the programmer used 20 different periodic tasks to organize their program, mostly running at 30ms intervals. several are set to 10ms and some are even set to 3ms. I have gone through and found out that the short interval tasks have been overlapped 10's of millions of times, and the combined total of all scan times is over 160ms. I have a strong feeling this could be causing our comms bog down and possibly other erratic behavior but would like a second opinion. This machine has 2 indexing dials, with work stations that do work between indexes, Pick and Place operations, etc.  Is there even a need to be running these with periodic tasks? All thoughts are appreciated. Thank you

ExterNetworks offers IT consulting services to the businesses of all sizes. When you are looking for custom IT solutions, you need a company that knows what it’s doing, from network support to project management. The service that you get with ExterNetworks is completely unrivalled by outside companies and with our high-end IT infrastructure and 24/7/365 service, you get the professional, quality in-house engineers and technicians that your business needs for success. To Know More Visit Site - IT Consulting Firms in NJ

Hello, I am having an issue with FIX Dynamics Real Time Database and the database columns available within when trying to query the database. On a system running iFIX 5.0, there are 19 data columns available, LHS of attached screenshot (in the screenshot example, crystal reports is used to view the columns). However in iFIX 5.9, only 15 columns are available (RHS of attached screenshot ), how can these missing columns be made available to be accessed? Regards, John

I have the following for sale. I would prefer to sell as a lot. I can send pics if there is any interest. EX40 + 20 IO Extension with 2 Unused output PCB for ext unit. 2 EX40 Plus PLC. Timer Counter access unit Operational. With 2 PCB with errors showing. Handheld Programmer (Squeekbox) excellent condition. CutlerHammer Original software with hardware dongle. Some spare parts, they were operational before I used for testing various functions. PM ME IF ANY INTEREST.

Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?

Where would I find TC_2PID_Function_BLOCK? as described in the Temperature Regulation Solution, Quick Start Guide v1.02 Is there somewhere on the omron web site to find all up to date FB Libraries?

Hello         I'm new for PLC, I need to set pump turn ON/OFF  in 4 time/day every day => [8:00-8:10]a.m, [11:00-11:20]a.m, [2:00-2:10-14:10[p.m, [5:00-5:20]p.m ** I have Omron PLC CP1E-N30 , Could you advise me, please ?  

My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.

Please send Fuji Wsz plc software download link  

Please send Plc software link

Currently, our SCADA setup uses Kepware, Wonderware, and Canary Labs data logger and historian. The data flow is as follows:  PLCs --> Kepware (on PC near process) Kepware --> Canary Data Logger (on PC near process) Canary Data Logger --> Canary Historian (on Server) Canary Historian --> Canary Axiom Viewer Client (on engineer's PC) We use Wonderware as an HMI on the Process PC to control the process. As many will know, this is very wasteful as Wonderware includes many other features and we are paying for all of them yet using only the HMI feature. Our goal is to cut Wonderware out of the equation (i am aware that Wonderware  could replace both Canary and Kepware with its data logger and OPC server features but this is the direction that was chosen so we are going with it).  My question is: Does anyone know of any simple and cheap (-er than Wonderware) PC-based HMI software that could replace Wonderware on the Process PC?

Anyone with knowledge of a VBA Run-time error '4205'  Can't find the project database! VBA stops at gTagDb.GetTag  Here are some things I already tried.  Cleared the CACHE files in the project.  Deleted .CAC file in TAG folder,  Removed Watcom SQL 4.0 from ODBC User DSN.  Uninstall and Re-install RSView32 Works 7.50 and then upgraded to 7.60.  

Hi there, just need a little help, I’m very interested to learn all about plcs, I know the basics and I know how to wire them, programming them is the hard bit! Ive got an FxOS MR30 from work, to play around with, I know I also need Gx developer also,  my question is,  could I use gx developer “micro fx “ for this?    It seems to be a lot cheaper than the normal go developer.http://ie.farnell.com/mitsubishi/gx-developer-fx/software-micro-fx-plc/dp/3825577 any help with this would be great thanks 

Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay

Hello everyone, Have a nice day to all. We just received a small machine from china, and definitely we done a lot of modification to add  safety and other sequence, to adapt this machine to the existing line. I'm familiar with siemens and omron, and this is my first time for mitsubishi PLC. FX3sA-20MR, can somebody pls. help me what software do i need to download and programming cable to communicate with the PLC. Thank you in advance...