Search the Community

In my present project, I have to interface an energy meter that has its kWh count in 64 bit Double format. Now that Vijeo citect hasn't a facility to create tags of the "double' type I am looking for a work-around to this problem. Thanks for any help/advise in this matter

Good day, I´m helping with small project and currently i am stuck because of this problem. And I hope you can help me out. I´m using PowerFlex 525 connected with AB CompactLogix 1769-33ER PLC via EtherNet/IP. Connection is working, I can read and write values from/to 525. To configure both devices i´m using RSLogix 5000. 1) First problem occurs after I loaded configuration to 525 and it´s, that 525 keeps overwriting values of Accel and Decel Time 1. It happens when i directly change parameters in Module Properties (online) or after I upload configuration to device. It happens even if i set parameters directly to 525 with its HMI panel. - I kinda get around this problem when i use Accel/Decel Time 2 for Step logic, but if i send direct reference value motor still jump to it and that is not good, especially when changing direction of rotation. 2) Second problem is that I cant get Speed Sources and Start References right. Usually Is working only option 1 and others are not, or they are doing something else that they should. For better imagination this is what i want to do: I have 3-state switch (left = 1 ON(DigIn TrmBlk 02), 2 OFF; center = 1 OFF, 2 OFF; right = 1 OFF, 2 ON(DigIn TrmBlk 03)), In center position I want to control 525 with EtherNet (already working when: Start 1 AND Speed 1 = EtherNet/IP). In left position I want to control motor directly with Drive Pot and In left position a want to start Step Logic (which i have already set) - Funny thing, If I set Start 1 = Ethernet, Speed 1 = Step, Start 2,3 = DigIn, Speed 2,3 = Drive Pot then in all three position motor goes in Step logic.. Or when i get left and right position working then Ethernet is blocked.. and this kind of things.. I Attach print-screen of my current settings, if you need something more just, tell me. Thank you for your time, and I hope someone will be able to help me.

I am currently trying to get my program to take distance traveled per pulse, which is based off of the diameter, and convert it into IPM. I am using RS Logic 5000 software. If anyone could help me get over this hump I would really appreciate it!

Hiya Guys, New here (first post!) - and I'm fairly new to Connected Components Workbench, so apologies for the mammoth post! I am currently developing a System using one Micro850 PLC and one PanelView C600 HMI. I am able to update the current HMI time by sending Unsigned-Integers to Global Connection Tags: System Clock – Hour ($SysClockHour);System Clock – Minute ($SysClockMinute);System Clock – Second ($SysClockSecond);However, if using the same “update time” more than once, this method does not work as the HMI is looking for a “change” in a Tag before an update occurs (Tag-specific). For example, we require to be able to receive a “synchronisation signal” on a digital-input on the PLC each day at 15:00:00. This will only work once as, even though the HMI’s current time updates every second, I will still be sending the values “15”, “0”, and “0” to the above Tags (which will therefore not force an update – as they haven’t changed). I cannot reset these Tags without updating the current Time – as any number “out of range” causes an error (incidentally the errors are shown on the HMI to occur on Tags “SysClockSecondTimed”, “SysClockMinuteTimed”, and “SysClockHour” – note the omission of the word “Timed” on the Hours error…). There appears to be no reference to these “Timed” Tags anywhere in CCW, and I have no idea why the “Hour” update errors on a different (the correct?!) Tag. It’s a pretty confusing problem and difficult to explain… it took me a while to get my head around it – and I can see what the code is doing! J I've looked for documentation on how these Global Connection Tags work, but I can't find anything. Everything I (think I) know so far is from extensive testing... so if anyone knows of any documentation, or has any suggestions as to how I can achieve the required result - that would be massively helpful! Thanks for taking the time to read all this! Cheers, Steve.

Can any one help? I am trying to write logic to collect data off a Control Logic controler using V.20.03 Logix5000 software. Attached is a copy of Time and Date logic. I there an easier way?

Hello all, I am experiencing an unusual (and what appears to be an unheard of) behavior in my CompactLogix L18ER controller. I am setting the date/time of the controller from my work station, however when I GSV WallClockTime, it is reporting 4 hours different. I have asked our local resources as well as done some forum and knowledgebase searching without result. Has anyone encountered this before? Attached is a screenshot of the controller time vs. the wall clock time. This isn't mission critical since it can be manually adjusted however I would like to understand what is taking place that would cause this behavior. Thanks!

Hey guys, sorry for all of the newbie questions, I had 1-2 years of PLC training at a tech school, and then I got a job where I didn't use my knowledge at all for 2 years, and now my current job is all PLCs, and I have forgotten some of the stuff I learned, but it's coming back to me, so I appreciate all the help with the stupid questions. Anyways, here is my question. I am using a MicroLogix 1100 running RSLogix 500 to collect data on a few of our machines about scrap parts and run time vs down time. I just have some basic inputs hooked up to it. I need to be able to send the data to an integer file at the end of every shift, and then reset the current data (easy enough for me, at a certain time I will use a MOV function to move the info from the timers and counters to integers and then use a RES function to reset everything that I want). Anyways, my question is how to I tap into the free running clock built into the MicroLogix 1100? I see that it is S2:4, but I am confused how to use it or set it. I just set one up on a SLC 5/05 and that was super easy, I just set the time while it was online, and then used 3 different COMPARE functions to tell it when I wanted to move/reset the data (I used S:40, S:41 and S:42). Anyways, I can't seem to figure out how to tap into this clock on the MicroLogix 1100. Can anyone help me with a "dumbed down" step-by-step guide. I just want data sent at 6:30, 14:30 and 22:30 and then data reset 2 seconds after each of those times. Any help is truly and honestly appreciated and very useful. Thank you in advanced. Howard

Hello, I'm trying to convert time into seconds using the SECOND function. I use Word(signed) array 0..2 but get an error message saying "wrong input data type". What data type do I need? Thank you, Jurgen

Dear all, I need some help with programming time in concept 2.6 in FBD. I use momentum PLC 171 CCC 980 30-IEC I would like to program 24Hours Clock with day, week and year. Can someone help me with this please. Regards Sam