Search the Community

Showing results for tags 'read siemens logo excel'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 232 results

  1. Siemens PLC get data from OPCUA server.

    SoraJayson posted a topic in Siemens

    Good day all, I'm going to get a new Siemens PLC (model haven't decide) for a project using OPCUA server. I'm curious to know whether I made the right choice or not? Cause I planning to use that PLC to process some data that it got from OPCUA server. Can I know whether I can directly use Ethernet connection to take the data from server directly and fed it into my Siemens PLC? (I probably won't use the DI of the PLC for input data)
  2. Hi, Is it possible to have two hardware configurations which can be switched through HMI. currently i have two hardware configurations and the project remains same. So without connecting with Simatic Manager i want to switch the hardware configuration. 
  3. Check it out here! https://youtu.be/PK6X3S8RlE0

  4. Siemens IEC 60870-5-103

    Lmv posted a topic in Siemens

    Hello!, im having some troubles communicating Siemens Relay 7SJ622, with the IEC 60870-5-103 protocol, with some SEL controller, i don't have any signal of the slave relay 
  5. Hi guys, since this is a forum for people starting out with TIA Portal, I would like to share with you my course that I developed for the last 6 months.  This course uses a real-life sample application and translates it into a fully functional TIA Portal PLC application.  This course of 2,5 hours consists mainly of video explanations with practical programming assignments to put your newly gained knowledge straight to work.  As a controls engineer, I have over 10 years of hands-on experience with TIA Portal ranging from software development, commissioning and troubleshooting. At the end of this course, you´ll be able to: Structure and program a real-life user application in TIA Portal Download and Troubleshoot a TIA PLC application Program function blocks (FB) using ladder logic Build global data structures using user-defined-data-types (UDT) and data blocks (DB) With the coupon link below, you can enrol for only $12.99 (might vary depending on the country you live in).  The course is normally $99.99, so you get an amazing all-round programming package for almost no money.  So go and check it out  Take me to the Course Now!      
  6. Did you always wanted to get started with Siemens TIA Portal programming, but you were never sure where to start or how to get the best performance out of the platform? Eager to upgrade your TIA skillset from an instructor with over 10 years of TIA experience in the field?   -> Then this course might be just for you! My course "Siemens TIA Portal - PLC Programming Basics" will take you through the steps of creating your very first TIA application - from structuring (very important!) and programming your application, to downloading and troubleshooting your application online.  The course is based on video lectures and is around 2.5 hours long, and consists of 40 lectures divided over 6 main chapters. The enrolment fee is offered at a huge discount at the moment, so take action while it lasts! Take me to the TIA Portal course, I´d like to check it out...   Thank you, and I hope to see you inside the course! Hans
  7. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.

  8. Omron CJ1M CPU11 - ProfiNet - Siemens

    MrRambunctious posted a topic in CX-Programmer

    Hello guys, newbie here. Wait, where are you all going...? Don't go! I've got *some* experience. And a job on my hands. I've got an Omron CJ1M with a CPU11. Attached, is a PNT21 Profinet IOController. At the other end, it is going to be a Siemens SIMATIC ET 200AL, PROFINET interface module IM 157-1 PN with a couple of digital input and output modules attached. The hardware isn't here yet, otherwise I'd just jump straight into trouble. Probably. I've got it mostly setup in ConfiguratorFDT with the GSD files from Siemens. The question: How do I map the Symbols to the digital IO at the other end of the profinet? Can I just set the symbol address to the IO areas that ConfiguratorFDT show me, ie, 3300 for the inputs, etc? Thanks!
  9. i am trying to communication my weintek HMI with Siemens Energy Meter PAC3200. I am using MODBUS TCP/IP Protocol but i am unable to read the data register of my energy meter. Somehow i got to read the 32bit data register but still unable to read the 64bit data register of my total KWHr Energy consumption. I have also attached the manual of my energy meter. Please guide how to read all the data registers of that energy meter. Please see the page 40 onwards for reference. The manual the about 7MB so i cannot attach the file. https://support.industry.siemens.com/cs/attachments/26504150/A5E01168664B-04_EN-US_122016_201612221316360495.pdf  

  10. FX5U Link to WinCC RT Advanced

    Morne posted a topic in Mitsubishi

    Hi guys I am trying to connect a Mitsubishi FX5U PLC to a Siemens WinCC RT Advanced. I did find a document on the Siemens side on how to configure the HMI, but I can't seem to find any instructions on how to configure it on the Mitsubishi side. Any help, sample will be appreciated.   Kind Regards Morne

  11. Siemens Simatic S7-1200 component selection

    the last water drinker posted a topic in Siemens

    Hi,  I am designing measurement devices and i intend to use Simatic S7-1200 as PLC for my new device. The problem is, my background is nothing close the electric and I am having quite a lot troubles when it comes to select components, I do not know how can I select components that are compatible with the PLC i am going to use.  Pressure sensor, humidity sensor shall be selected and which parameters I should be careful about? I read somewhere 24VDC supply voltage is needed. Is it needed even the device has digital output or is it for analog output only? How do I make sure about the communication interface? For some devices it says I2C, is that compatible with S7-1200? or do i need a special communication module for each component? Then it will be super expensive.  I would appreciate any answer. 

  12. Connection cable for Sinumerik810

    muzzamil.baig posted a topic in Siemens

    Hi, I am trying to connect my M2 pg with a Sunumerik 810 cnc.    does anyone have the part number or pin out of the 25 pin-25pin tty cable that’s needed for this.    thanks   

  13. sthilaire

    dsthilaire posted a topic in Allen Bradley / Rockwell Automation

    Does anyone have any idea how to set up an OPC server in FactoryTalk SE for Excel?  I'm trying to move data from a spread sheet to the PLC.  Got it working in excel now I'm trying to initiate the transfer from SE. 
  14. Hello, I need to make communication NB TW01B by Omron with Siemens's S7 1200 PLC using MODBUS TCP. I did everything like in this manual: https://www.myomron.com/index.php?action=kb&article=1566 I can read and write single bits from and to DB but I have problem with representation of float variable. In hmi_variable.png you can see my DB. Every BOOL variable communicate just fine the real ones doesnt. In NB - variables.png you can see how i added them into NB panel variable table. Settings.png shows settings of my INPUT number element on the frame( screen in NB). When I write on panel for example number 10.0 then from the panel view it looks properly but in PLC you can see value like in the 10.0.png. What am I doing wrong? Any suggest? hmi_variable.png NB - variables.png Settings.png 10.0.png
  15. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  16. HI everyone ,  i will be very glad if anyone helps me to clear the doubt . I am using MX component version of 4 to connect with my CCLINK J61BT11N   Board. Is there a way to read group of registers from the CC-LINK . for example, if i want to read from D0 to D5  or write D0 to D5.  is there any function  in MX component which helps to read the group of registers? I use MItshubi PLC .
  17. Hi all,  I am in the process of doing a project for some school work and need to do a SWOT analysis of the latest modular PLCs from Mitsubishi (R series), Siemens (S7-1500) and Allen Bradley (ControlLogix).  So I thought what better way than to ask the people on what they think are the pros and cons of each! Thanks for your responses in advance!

  18. STEP 7 MICOWIN DOWNLOAD

    Kiiza posted a topic in Siemens

    Hello everyone. I am looking for a link to download Microwin 4.0 sp7 or higher and not the update. Kindly advise me. Thank you.
  19. Hi all. I would like to get in contact with whoever can help me in my particular problem. I hold an HNC level in robot and plc programming but for different reasons I'm still trying to get on the industry but is being a hard task. It's been a while that I'm trying to get into some companies by agencies and they are always asking for something that I can't provide like two years experience. Basically I'm writing here trying to find someone that can help me in anyway. Currently I live in Shrewsbury and it will be complicated to get relocated but nothing is impossible if things are interesting for both sides. Thanks to all even for read it and just consider the possibility to help me on any way.   
  20. Dose anyone have experience with Beckhoff FC3121 profibus master PCIe card connected to Siemens CP342-5 as a profibus slave? The data retrieved from S7 PLC is wrong, and keeps fluctuating rapidly. TwinCAT (TC) config looks OK, and it reports that the slave is OK and has no error. The slave is in Run mode with green LEDs. S7 side is believed to be OK as another master from HMS-Anybus retrieved the data correctly. Tried several versions of TC up to the latest (at the moment) ver. 2.11.2305. Here is a zip file with two graph pics of the two masters showing how the "same" data looks like in each case: https://drive.google.com/file/d/1ijlx6AXA3FX8GqgJjwWlFMxPxqT4xN9F/view?usp=sharing Thanks, Hos
  21. Hello,   Target:  I'm looking to make an excel macro that will take an IP address and pull the components on that specific backplane. Pretty much how RSLinx Classic OEM does it, but it will save me a lot of time if I could automatically put the results into excel. Example: Enter IP "111.111.111.111" into excel, run the macro, and have it fill in the components on the backplane below. 111.111.111.111 00, 1756-L73 LOGIX5573 01, 1756-EN2T 02, 1756-DNB 03, ... 04, ... Any help that could get me toward this would be amazing. I'm just not sure of the code that would do this.   Thank you, MalSmith21
  22. I'm a Controls Engineer and have exclusively used Allen Bradley for 8 years. Outside of my job, I was asked by a new start up brewery if I could help with some PLC and HMI issues they are having.  I'm anxious to lend a hand, but unfortunately it's all Siemens and I don't have any experience with it.  I'm sure I'll be fine once I'm able to communication with the PLC, but the software and license are my concern. My biggest hurdle is determining what software I need and hopefully finding a free version I can use. The PLC is a Simatic S7-1200.  I found a link on Siemens for a free 21 day trial for TIA Portal and WinCC, but wanted to make sure that was my best option. If anyone could offer any advice, I would greatly appreciate it! 
  23. Looking for any and all new industrial surplus and even some used on a case by case basis. Anyone have any questions feel free to email me at contact@trojansupply.com We also have some great deals on any items we have instock we compete on price as we are a small entity. Same day shipping available. 
  24. My project is to read an RFID tag (ascii) with a Micrologix 1400, send the string to a PC using Ethernet/IP, lookup and compare in an Excel spreadsheet, and send back data (probably an integer) for the plc to use to control direction. I have to scan and compare an RFID tag to a list of 1400 possible part numbers, at different locations (more than 1 plc). I want the several PLCs to go to a single PC to make it easy to update when changes occur (on a weekly basis). Has anyone done anything like this? I'm assuming there will have to be some kind of vb or c+ application involved.   Thanks,  CK

  25. mitsubishi PLC R series

    kaviraj posted a topic in Mitsubishi

    I have R16 PLC (firmware45) and SD card(2GB). Can any one help me to create CSV file in SD card.I need to Logg the data of D0-100 when the M0 trigger bit goes high. can any please help to creat  ladder for this. it will be really helpful.