Search the Community

Showing results for tags 'read and write to pm1200'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 36 results

  1. GX Developer project does not open

    Hello All, I have a GX Developer project folder file sent by the client. I am not able to open. It opens the GX Developer and says Failed to read the project file. The screen shot is attached. Also the  the project is attached. Please help me to open the project. I am using GX Developer version 8.91V 显示器 综合测试.rar
  2. LOGO For Excel

    Version 1.0.0

    12 downloads

    LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data.
  3. View File LOGO For Excel LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. Submitter progpro Submitted 03/25/22 Category Demo Software
  4. connect encoder to nx1p2

    hi everyone i have a question about nx ec0122 i connected an encoder to ec0122. now i want creat a programm for read the pulse and reset pulse. Then write a program to measure the length of a roll. How should I do this? Thank you for your help
  5. S7 Excel Connect

    Version 2.0.0

    41 downloads

    S7 Excel Connect allows you to read, log and write one or more Siemens S7 PLCs data using Microsoft Excel. This can be data from a datablock, marker, input/output as well as digital as analog (not peripheral), timer and counter. S7 Excel Connect can be used for many uses ranging from a reporting tool, to a tool to write recipes to any S7 PLC.
  6. Hello, On our DCS we have a button that will open an RDP connection to our PLC server and open the .mer file connecting the DCS to the PanelView HMI. This is supposed to be used for troubleshooting purposes only, but that is not the case. Is there a way to prevent operators from operating the HMI through the RDP while still allowing them to have read only access?   Thanks, Michael
  7. How to scan Ethernet/IP network?

    Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment?  Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?  
  8. plc mtsubishi r series and rj71c24-r4

    hello, im working with r04 mitsubishi plc with rj71c24-r4 in modbus rtu mode, i need to read and write PM1200 scheneider values, but i have problems, is my first time with this model and very different than fx5u model, i working in GX works3 someone who can guide me, I would appreciate it too much
  9. Hello Im trying to read from my PLC but i cannot see the program file.  However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?
  10. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  11. Hi,     I'm trying to communicate Omron CP1E unit with PC via serial port using hostlink protocol.  I need to read the Timer/Counter SV value and write the timer/counter SV values to the PLC.  I'm able to use other C mode commands (like RC (timer/counter PV read), WC (timer/counter PV write) etc.) but when I give the command for Timer/Counter SV Read 1 which is R#, I get the response as IC (Undefined Command).   How do I write or read the timer SV Values?  Example command and response : @00R#TIMH001028*  (TIMH is the high speed timer, 0010 is the timer number and 28 is the FCS) Response: @00IC4A* Is is that CP1E doesn't support these commands? If so what is the equivalent command that I should send inorder to perform this? Please help.  
  12. WRITE MULTIPLE REGISTER MODBUS

    Hallo my name is Danu, i have a CP1E wirh CP1W-CIF11 and connect to modbus RTU device, i have done with write single coil, write single register,  read single register and read multiple register. But i try to write multiple register,  the indicator of CP1W-CIF11 is off and if i check d memory its no data. I attached my cx programmer. Can you help me create write multiple register in cx programmer?  Thank you AD4402-modbus edit edit edit edit edit.cxp
  13. HI everyone ,  i will be very glad if anyone helps me to clear the doubt . I am using MX component version of 4 to connect with my CCLINK J61BT11N   Board. Is there a way to read group of registers from the CC-LINK . for example, if i want to read from D0 to D5  or write D0 to D5.  is there any function  in MX component which helps to read the group of registers? I use MItshubi PLC .
  14. mitsubishi PLC R series

    I have R16 PLC (firmware45) and SD card(2GB). Can any one help me to create CSV file in SD card.I need to Logg the data of D0-100 when the M0 trigger bit goes high. can any please help to creat  ladder for this. it will be really helpful.
  15. Dear all; I can`t Write data configuration to CPU Q02HCPU.     
  16. hello everyone.Please help.I have a program for the machine written on protool and Strp7, When I want to open it to add changes to it, it gives me the erroropen object 734:26 OM TD/OP: simatic-op is on a write-protected medium.please tell me, How can I overcome this problem?"Unexpected file format" Attached images.Thank you for your help
  17. Read/Write data to PLC

    Goodmorning a question... I builded a simple monitor of plc. I need to read the data of the Mitsubishi FX3GE PLC. In example I should read: D14  FLOAT 32bit D16  FLOAT 32bit alarms from M100 to M119 and a bit of state M450 How can I do this? The PLC is connected via ethernet and the port il 5002.  I'm working with PHP and normally use modbus, opc-ua, etc. But here? Thanks in advance Carlo
  18. Omron CSV FILE

    Hi Everyone.I want to read the csv file to plc. How can I do it. I will use to NB 5Q-TW001B for hmi.  PLC model : Omron CP1L-E
  19. Vijeo Citect - write to tag - error

    Hi everyone.  In Vijeo Citect SCADA I created some tags and I try to write to a bit device of MELSEQ Q PLC. But I get this error : Cicode General software error. Note: I can read from PLC.
  20. Does anyone have an example piece of ladder logic, created on a Micrologix 1200, using ASCII to READ and Write to a serial device?  I am building a ladder on a Micrologix 1200 that will send data to an old CNC once a certain ASCII instruction is received on the PLC.  For example, when the machine spits out an ASCII "1", the PLC will see the "1" and send out a three digit number depending on a sequence of discrete inputs.   Thank you,
  21. Hello everyone! Is there possibility to read words e.g. Name of alarm from the csv file or another file and save it in the PLC memory for further processing? It would be the best if the solution will matches to FX5 and IQ-R/F but it can be also for any of them. Thanks for help :)
  22. I am using GX Works Version 1.493P After selecting Online->Monitor -> Monitor Mode ... and doing some online debugging... I find my projects stuck in read-only mode. Even restarting the computer does not make the project editable again. Any help will be greatly appreciated.
  23. Hello everybody, I have network from : PC - 192.168.3.11 PLC - 192.168.3.250 I change this option in FX5U PLC in GX Works3 for Network Ethernet port --> Application Setting -> Security -Disable Direct connect with MELSOFT : Enable/disable -DO not respond CPU module search : Respond / not respond and I upload program to PLC. After upload program to PLC and restart it was impossible to connect again. I Have ping between PLC and PC, but could't write program. Always writes me Error <ES:0180840b> So to disable Security Option you should to do : 1. Open Works3 2. New Project (Choose your PLC - FX5U) 3. Online menu 4. Specify Destination Communication 5. Click twice in PLC module 6. Set Connect via hub (In my case i connect PC and PLC directly !) 7. Choose IP Address ( in my project : 192.168.3.250 , PC must be in same network 192.168.3.X) 8. Give OK 9. Connect Test. With steps I disable security options and it was enable to connect to PLC and Write data on it. I Hope that will help to other with same problem. Special thanks to : Piotr Tynor(Mitsubishi, Poland ) , Adam Syrek (Mitsubish, Poland ) , I. Ayvazova (Bulgaria) , K. Raykov (Bulgaria)
  24. Structured Ladder

    Need Help! I uploaded structured ladder program into FX3S PLC. But When I try to read it from PLC it says the program cannot be opened. 
  25. As part of a startup initialisation I want to set some 400 memory tags to a string value. I use this routine: Public Sub WriteValue(val As Variant, TagName As String, Fm As Display)     Dim TG As TagGroup     Dim WriteTag As Tag         Set TG = Application.CreateTagGroup(Fm.AreaName)     TG.Add TagName     Set WriteTag = TG.Item(TagName)     WriteTag.Value = val End Sub   It Works well - but it is slow. Making about 400 writes takes 40 seconds. I thought maybe the creation of a taggroup before every write was slow (like it's done with the use of this WriteValue routine), so I tried making a taggroup with all 400 tags first, set active=true for this taggroup and then do all the writes. But it's equally slow. How do I speed up the writing of such memory text tags? I have a had similar read-issue - here the many individual reads is slow, but if I create a large taggroup with active=true - then reading is fast.   I use FTview SE 7.0 on Win 7-64