Search the Community

Showing results for tags 'quick panel software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 133 results

  1. Dear Team,   We are looking for a suggestion to drive a motor which is away about 2100 Meter from its starter. The Pump is located in a pond in the forest which is 2000 Meters away from the nearest building. The pump capacity is 55kW and we are considering 55kW HD VFD as a starter. As we see the distance is much higher we are looking for you valuable suggestion about how this thing is gonna work without any abnormalities.
  2. PT property NB series

    hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
  3. Siemens Logo PLC

    Hello Experts Can someone please tell me if Communicating software for Siemens Logo PLC is downloadable? Regards
  4. Ok I'll try a different angle of attack. I have acquired an S7-1212c unit. It is just too new for my TIA portal, which is V 15.1 The new PLC I have has firmwear 4.5 the TIA portal I have only supports 4.3, I get some errors regarding synconization etc. and it's like there are some tins that don't work. how do I update the TIA portal to the correct firmware I've tried updating the HSP files but it doesn't change anything https://support.industry.siemens.com/cs/document/54163658/how-do-you-update-the-hardware-catalog-in-tia-portal-?dti=0&lc=en-DE
  5. hi, I'm trying to find out what kind of HMI panels can be used for a LOGO!8 ethernet plc. are panels from simens that can be used... they are a bit expensive  
  6. Dear Experts We have a machine with Allen Bradley Micrologix 1400 PLC, Panel View C400 Request to share communicating software and cable details please  Regards
  7. Hi from Colorado, Panel Builders @ MRPLC~ I bought a custom 508A assembly from a UL shop (277/480v 3 phase). The prototype didn't work out very well so I'm revising the design for next time. Before I present my "red line" revisions to the fabricator, could someone advise if I'm OK to simplify part of the work in a particular way? I just need to make sure my simplification doesn't run afoul of the 508A standard. My clients requested that a ten watt 120vAC amber LED (distant from the 508A cabinet) should light up whenever the 3 phase bus is energized. The panel fabricator provided an SSR solid state relay to close whenever 277v shows up across the "input" terminals & they fused the 277v hot for the input so that's all good. The "output" terminal is "single pole normally open", rated for 10 amps. The power that I'm sending in from outside the cabinet is from a small UPS system where the inverter is rated for 250VA's--so it can't deliver more than two amps @ 120vAC.  It seems to me that I don't need the series fuse that the shop provided to protect the 10 amp rating on the SSR--since my input power is already current limited. It also seems that I don't need to bring the associated single phase neutral wire into the 508A cabinet at all--since the neutral is never switched & it's doing nothing inside the 3 ph. assembly. If I revise the drawings along these lines, I'll eliminate two terminal blocks, a cc fuse/fuse holder & some wire...and this part of the assembly will be simpler & more intuitive.  Basically, I want to treat the SSR like a switch leg for the light, running only a 120v hot wire to & from the SSR output terminals. I don't want to revise the drawings, however, unless I'm sure the fabricator won't have to change them back to comply with UL 508A. I don't own the UL "standard" document & I don't know the peculiarities...but I'm sure some of the forum members do.  Should I add signage to explain that the 120v hot must be current limited or OCPD protected before it enters the 3 phase cabinet? Thanks in advance for any coaching or suggestions.      
  8. Hello there, I am new to the forum and had a question regarding a setting in Sysmac Studio.   In the Basic Settings for my NJ301 there is a setting on this particular line that is set differently than the other lines I have worked on. This setting is called "System service execution time ratio". On all the other lines I have worked on it was set to 10%, on this line it's 25%. This line also seems to have the most issues with controller performance out of all the lines I have worked on despite having less complexity. I was wondering if anyone knew what this setting actually does and if it should be changed.   Thank you.  
  9. control panel for sale

    Hi all, Hope everyone is doing well. I'm currently in the process of starting a home based control panel shop. I have about 8 years of control panel building experience and about 2-3 years of being shop team lead/design engineering. I have been planning this for years and now I have my shop full of necessary tools and material to build small/medium sized panels. I have gone through all the training and examination(which was not easy) to be able to produce UL508A approved panels. My goal is to produce a steady work load with great quality. Now I just need an opportunity with customers which I find to be the hard part. I have been contacting local industries but haven't had any luck. If anyone out there is seeking control panels built at a good competitive rate please advice.
  10. We are seeking a Control Panel builder in the SE Michigan area. We can supply the drawings, components, enclosure, etc. Typical panels include PLC, HMI, VFDs, and standard components. Please contact us if interested. We can send more details as needed. We typically need 20-30 panels in a year.
  11. Hi all, I'm not shure if I saw it once, a Spanish site with a rugged I/O shield for an arduino plus a software package to build an Arduino-PLC packet. It was pretty much $$$ raised... (on my oppinion, for my application, not to dispretiate their value). Has anyone thought of it or knows of such an ensemble: A general Arduino board, a general kind of "plc-shield" (some inputs, some outputs,...) and finally, a (preferably open-source) software package to make an off-the-shelf Arduino-PLC ish? Maybe it all exists with some name changes, or this question is of a huge ammount of ignorance. Thanks. Corvo (means Raven) 
  12. GX Works 3

    Hi everybody! Recently I've got problem with installation of GXW3 on my PC There is a message "Any of the MELSOFT products or other software may not be installed normally. Please restart computer before installing this product" during installation. Of course I restarted PC)), delete all Melsoft products from my PC,  please i need your Help here ver 2.7 IQWORKS  I have Windows 10 64bit .  
  13. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  14. PLC is old one, but I need to add one feature, Signal can be very short and when I get it I want to stop auto mode. I am afraid that signal can be so short and skipped by normal input. How I can set input as an interrupt input. I read that PLC has events processing and it can be triggered by " inputs 0 - 3 of position 1 module, on rising or falling edge"  - in first slot I have card TSX DMZ 64DTK. ( 32 inputs and 32 outputs) is it true ? -  and how I associate it. Maybe I create new Events and as an input I use f.e %I1.0  or I configure it somewhere?   thanks for help     
  15. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  16. Omron NB Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  17. EPS& Rock Wool Sandwich Panel Making Machine including unwinding, before cutting, film, beading / molding, rock wool and spray delivery, Edge foam, continuous curing, cutting and other functions, high degree of automation, stable performance.Edge polyurethane foam systems, automatic feeding system, to ensure that the raw material requirements in full accordance with the ratio of mixing, spray evenly; using a reliable foam technology to ensure uniform sheet foam, dense, sheet closely connected.The production line is equipped with automaticcontrol system, userfriendly interface for easy operation, monitoring, advanced computer control, easy to adjust the entire line of argument, effectively ensure the production line stable and efficient operation. https://www.yingyee.cn/sandwich-panel-production-line/45509417.html
  18. Can someone please suggest a Control Panel Builder that is located in Germany?   I work for a company in Australia and due to Covid 19, we are struggling to meet an onsite date for a project in Germany.   This project uses Siemens PLC gear, Danfoss drives, and mostly Schneider electrical gear. The enclosures are custom and stainless steal.    I have electrical schematics and enclosure drawings for quoting.
  19. I am starting an upgrade process for all my SLC50* PLCs and working out the communication of my machines for the upgrade. I ran into this complication I don't understand. I have 2 machines that work together using 1 HMI. Both machines have their own PLCs. Both are running SLC5/02 to 1747-AIC link coupler then to the 2711P-RN6 interface with the DH-485 communications running parallel. I don't understand how this works, or how I might possibly upgrade the communications from 2 PLC's into 1 HMI without linking the PLC's programming first. (Also, a complication I am working on, I only have the Runtime file, not the ME file for the HMI program). 
  20. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  21. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  22. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  23. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  24. Codesys

    Hello - I stumbled across some mention of Codesys and was curious if anyone here uses it. Pros/cons? prefer it over other programming software. Have it downloading currently (since you can download a free variation of the application) but it looks quite interesting. Also - what PLC hardware is programmed with it? Did not see that mentioned on their website when I was browsing through.