Search the Community
Showing results for tags 'q71e71-100'.
Found 1 result
Hi experts :D Can anyone help/try to help with the following conundrums: a) when changing the Ethernet Operation settings from Binary code to ASCII code, the setting are 'saved' in PLC settings, meaning that ASCII code is read as selected after a restart, but the PLC accepts commands and responds in Binary code. b) when adding a new TCP port, the new port is 'saved' in PLC settings, meaning that read as selected after a restart, but the PLC refuses commands on that port (the "Open" LED on the Q71E71-100 card turns on for the duration of the transmission but no reply is received from the PLC) notes: setting software: GX Works 2 target test software: Custom made Driver for MC protocol. (tested and working with FX and Q series and with ASCII and Binary code) PLC model Q02 (reset performed by removing the battery for more that 2 hours) ports used for test are: 5500 and 4999 (decimal) found 5002 port opened by default (no open setting required) PLC network module Q71E71-100 (new) I would upload screenshots of the settings but I get this error: "There was a problem processing the uploaded file. Please contact us for assistance."