Search the Community

Showing results for tags 'pv600 using rs232 and ethernet only'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 304 results

  1. How to scan Ethernet/IP network?

    crustyneon posted a topic in CX-One

    Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment?  Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?  
  2. Have been able to exchange data types of BOOL, INT,  DINT & REAL between Omron NJ/NX CPU with Allen Bradley Logix CPU's with Ethernet/IP using the CIPUCMMRead & CIPUCMMWrite instructions. I now have a need to exchange "STRING" variable types. Have tried varions string lengths in the NJ without sucsess. AB default string length is 82 & Omron 256 but I think the difference is the length headder that AB has with within their String Tag type. I know I could convert my strings to an array of bytes & sent them this way, but was looking for a solution to sent them as native strings. Hope someone out there has done this & can share their leg work? 
  3. Hi all,   Is it possible to simulate LMC058 PLC with ethernet in soMachine software. I want to test the logic written in PLC which uses tcpudp library.
  4. I have a 2 CompactLogix PLCs running right now, communicating CIP Safety and Standard data over Ethernet I/P.  For reasons I can't explain right now, the IP address of the second one HAS TO change semi-randomly (the 1st PLC is static).  Setting the 2nd PLC's IP to static or assigning it a static DHCP address is the obvious solution, but for the purpose of this question, that cannot be done. Is there a way to programmatically change its IP address on the 1st PLC's program?  (There is an HMI attached to the 1st PLC and adding a screen to enter in the new address would be trivial.)  The only bit I'm still missing is how do I change the IP address on the module in the 1st PLC so that it's pointed at the right IP address of the 2nd one when it changes.    I found instructions on how to use msg instructions, but that hasn't worked yet.  Any help would be appreciated. Thanks!
  5. I have an Ethernet/IP bus and system including Ethernet/IP devices with CPU 1756-L81ES ControlLogix. PLC is connected to the switch. Bus is built from the switch as a line. Can I connect the last device on the bus back to switch again? In thes case bus will be ring. Do I get problems with connection it this way. Switch is Stratix 2500, which is lightly managed switch. I believe it will increase the traffic in the bus.

  6. HOW CAN I USE NETWORK I/O ON LADDER SOFTCOMFORT?

    Rodrigo Balsalobre posted a topic in Siemens

    Hi! I was doing an project using function block, but at one point it became too complex to use FBD so I would like to use ladder.  I'm using an ihm and that's why some inputs are of the network type, in FBD, it's easy to use the network i/o, but in ladder, the network inputs, where I receive data from the ihm, don't have outputs for me carry out the logic. How can i do this? USING FBD USING LADDER As you can see, theres no output on network analog input, on the digital to!
  7. Is there any way to monitor ethernet/ip bus, states or faults and to make an alarm to the panel alarmlist. I am using IO-stations (1734-AENTR) and I would like to monitor somehow the system. I feel that reading the slot status of the 1734-AENTR device is not enough, because it is not possible to monitor all the cards in a slot. How to get alarm on a screen if I lose any station on the ethernet/ip bus?
  8. Hi there, I am fairly new to programming serial communications, especially with Mitsubishi PLCs. Can someone walk me through in ladder logic how to bring in ASCII to the PLC, store the data in the data registers. Then send the data out to another PC once an 'X' input is satisfied? ASCII code would go like the following: C2,0,1,123,2,ABC,3,456,CR
  9. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.

  10. OMRON CQM1H-CPU21 Serial Connection

    SillyBoy posted a topic in Omron

    Hello Sir / Ma'am,   How to connect Omron CQM1H-CPU21 (Image Attached) to the software for Configuration. I have tried it many times but I think I am missing something from the wiring side. Above mentioned Controller has a built-in Peripheral Port and an RS232 Port, We don't have that particular cable that connects the Controller to the Software via Peripheral Port. Kindly help me to connect the controller using the RS232 Convertor.   I am using ATC-810 RS232 to USB converter. (Image with all Pin Details attached) Software - Syswin or cx-programmer. (Upload failed, please use the below link of wetransfer.com to see images) https://we.tl/t-XmuqtUCYOk  
  11. Hello guys. I have problem create communication between Omron FQ2 camera and Allen Bradley PLC. Can anyone advise me ?  I set it up according to this manual: ftp://85.129.89.106/Vision/FQ/Communication/EthernetIP/FQ2%20to%20AB.pdf.      
  12. I need to know what kind of connector/cables i can use for my network: Topology, ( all on one switch): * Ethernet: FX5U, GOT, Safety PLC (WS0-GETH00200) * CC-Link: 2X  Inverters FR-A840-00023 Does this systeem needs the RJ45 4wired  or  8wired cables/connector?
  13. I am trying to connect an Advantys RIO island with a STBNIC2212 ethernet/IP to a Omron CJ2 PLC. I need an EDS-file for the Omron Network Configurator but the Advantys Configuration Software will only export to .xsy for NIC2212 (Ethernet/IP), only way to get an EDS is to substitute the NIC with a NDN2212 (DeviceNet), but I doubt that will work in the Omron Network Configurator. There is an EDS file on the SE-website, but it seems to be a different setup than my island. I thought ethernet/IP should be easy :( Any suggestions? Geir
  14. I have an SLC 5/03 that Im trying to get the program from. I have a 1747-uic. Im not getting anything to show up in rslinx and I suspect the channel 0 is configured for ASCII because theres an HMI plugged into it. Also the rj45 connection is broken because someone used a crossover ethernet cable...lol. is my best bet to try and fix/replace the 1747-uic? I have an offline copy of a program from a different machine that uses a 'similar' setup and the CH.0 -System is configured for DF1 full duplex,19200,CRC and CH.0 - user is ASCII 19200 baud. Any Ideas? I was using the 3 wire db9 connector running from the HMI to the PLC. I unplugged it from the HMI and used it with the 1747, Should I use a standard DB9 cable with a null modem adapter?
  15. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!

  16. modbus rs232 communication error

    gaith_sharabati posted a topic in Mitsubishi

    hi I am traying to connect 10 plc's FX3U to a scada system, on the plc's there are a rs232db and FX3U-232ADP-MB cards. i have devices transmit the rs232 by lan or any thing I need (rut955) my problem is when i download the program on plc same times the communication go right , but if i powering pls off then on the communication fail down. I initialized the plc  like photo https://drive.google.com/file/d/1Tr367wfVCRG6vvKcsOFyTKG_FExAsnVy/view can any one help me? sorry for my English
  17. Hi guys, i got some problem when connecting to ethernet modules to 1 virtual computer. My virtual computer has IP (11.20.103...) my 1st ethernet has IP (11.20.52...) and my 2nd ethernet has IP (11.20.96...) i can connect the 1st ethernet to virtual computer with mx component, but i cant do that with second ethernet module. Are 1 virtual computer just can connect to 1 etherner? Or the third IP must same each other? Can anyone help me Thank you
  18. I am searching the RA Site, but thought a quick post might also yield some insight. I have a Version 17 ControlLogix L61 CPU with 1756-ENBT/A version 4 Ethernet Card. The system is dropping communications with it's SCADA System {Archestra Wonderware 2014 R2} I started by going to the ENBT Web Page and looking at statistics for a "smoking gun". I think I have found some things that might be worth investegating, but am not 100% sure of what they mean. The Diagnostic Overview shows 9/128 CIP Connections and 24/64 TCP Connections so nothing worrisome there. However, the Diagnostic Overview also shows CIP Conn Timeouts growing at the rate of 8 per minute.  - Possible Something!! The ethernet statistics page is where things start to get interesting.  In Errors and FCS Errors are growing at the rate of 4-6 per minute.  I have no Idea what an FCS error is? ANYONE? I'm wondering if I need to check the PLC program for some message instructions in error state?  
  19. Hello, We have a FX3G connected to a FX3U-ENET-ADP inside a main cabinet. We are then using that master PLC to collect data from 2 other fx3g plcs in a node:node serial network. I was assigned a small project of pricing out some wireless adapters so we can upload/download to the two slave plcs. My question is, is it possible to upload/download programs to/from the slave plcs through the ENET adapter and serial network in the main plc? It would save us some money if possible. thanks.

  20. Mitsubishi PLC with Fernhill SCADA

    Akhmad Zaki posted a topic in Mitsubishi

    Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
  21. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  22. Hello All,    I have had no luck sorting through Pilz datasheets on this CPU to find cable / software to connect/upload the program. Any insight?   We are upgrading this to the CPU 4000 series - it will use DeviceNet. Will this node number / memory allocation be setup within the 'PSS 4000 Firmware' software? Where do I find a guide for this?   Thank you.
  23. I have a Siemens HMI 6AV2 124-0MC01-0AX0 in my machine. I want to clone the display on the HMI to PC/Laptop. My question is: 1. What software that I need for this task? 2. What kind of interface that I need between the HMI and PC/Laptop (for example ethernet cable, etc)? 3. Do I need to communicate with PLC connected with HMI or can I just connect with the HMI? Thanks in advance for the answer.
  24. Hi dear friends, what do i need i order to make a backup from a panelviwe plus 700 and upload it to another? the HMI is communicating to a SCL 5-05  by ethernet by the way. hope you can guide trough this best regards
  25. I have an open source library for Ethernet/IP and Modbus PLC communications.   It also support PCCC-type PLCs like PLC-5, SLC and MicroLogix via encapsulation in CIP/EIP (Ethernet/IP).   I just had a user let me know that they have a PLC-5/80 that apparently never got fully updated to support Ethernet/IP.   It appears to only support CSP (port 2222).  I have most of the code already, so I want to support CSP. I have a converted PLC-5/30 with a 1785 sidecar.   It shows open ports on port 2222 and 44818, but if I connect to port 2222 using Ron Gage's code, it immediately closes the connection.   I read somewhere (here? I think it was a comment from Ken Roach) that this was used to tell RSLinx to try the other protocol. I want to use some sort of PLC that "speaks" CSP in order to write up support for it in my library.   Is that something that I can do with my old PLC-5?  I looked around in RSLogix 5 to see if there was something obvious to re-enable CSP on my PLC-5 but I could not find anything.   Anyone have any pointers?  I might think about going on eBay to find some old hardware, but how could I even tell if something supports CSP?   Even a simulator would be fine.