Search the Community

Showing results for tags 'pv550 to rslinx cable pinout diagram'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 63 results

  1. 1746-IQ32T

    Can anybody help me with the pinout diagram of 1762-IQ32T with 1492 I have seen the manual but it doesn't exactly tell which should be the first input and which should be the second 
  2. Looking for ideas on connectivity issues with RSLinx/RSlogix when using an EWON Cosy 131 running on Windows 10. So here's whats up: Was running windows 7, could connect to the EWON VPN and use the ethernet driver in RSLinx to get to the PLC(compact logix). Also used Automation Direct C-more software with no problem as well. Now on Windows 10, the Automation Direct software still works fine, i can ping the PLC and get to its webserver but rslinx/logix will not pick up the plc. I have tried setting up a new ethernet driver to no avail. I also connected a cable directly to the plc from the pc, bypassing the ewon, and rslinx/logix will then see the plc, so rslinx does seem to "work" in windows 10. Any ideas on how to get connectivity back over the EWON VPN? I have these in customer plants and really dont want to revert back to win 7.   Thanks    
  3. Can't communicate with RSLinx

    Hi, I am trying to go online with PLC and i got an error. The funny part is before I shutdown RSLink, it was lite version and i was able to go online with my PLC. However, When I re-opened RSLinx, It became gateway version and I dont have an access to go online with PLC anymore. I have attached a screenshot. Thanks 
  4. RSLogix 5000

    Hello Dear friends, I have following two problems in RSLogix 5000. I just started working with this software. I am using RSLogix 5000 for my project and I want to use inbuilt drag and drop elements like measuring instruments for example Voltmeter etc. in my ladder diagram. Does it possible or do I need to add some libraries or add ons for that?  I want to plot graph of different properties with respect to time in RSLogix 5000. my question is again the same; what is the way to do it or do I need extra Add ons?  Thank you in advance for your help :) Merry Christmas!!
  5. Hi Friends, In my laptop i am using the Factory talk ME software.Recently I have the following problem when I open the HMI project in the FT view ME.I am not able to configure the Communication Setup for the HMI project. I have tried by uninstalling and installing the FT View.but the problm still exists. "RSLinx Enterprise" Computer X does not exist in the FactoryTalk Directory.Contact your Administrator for more information. (X = the name of my laptop) Please help me as I may travel next week for a commissioning. Regards, Siva
  6. Hello, I am trying to connect an OMRON CMP1-30CDR-A-V1 to my PC. I used a CQM1-CIF02 cable which I connected to RS232-USB converter and then to my laptop. Is this the right way to do it? I have seen on the OMRON website the attached diagram. Should we use that device or an RS232-USB converter will be enough? Also. I tired to use a PC with RS232 port directly but it also failed. Regards,  
  7. Ethernet calbe

    Hello. This is the first time I use Ethernet in PLCs. I want to connect a Compactlogix L24 with remote I/Os and Panelview. I have many questions . But can you help me select the type of cable for this application , 2 or 4 pairs? shielded or unshielded?
  8. I wonder if anyone can recommend cable id printer? I know Brady is the leader in this field and I have used their products in the past but I wonder if anyone has used any other manufacturer they can comment on? I found the K-Sun Green Machine but I am not sure how does it compare to lets say Brady BMP71 and how much more expensive or cheaper their consumables are? Any other products worth mentioning?
  9. Hello, For years we had a silo, that was bought from a 3rd party, with a control system that works ( has a fast input and plc scan time ), but has incredible slow feedback to SCADA. Since the silo is off site, often closed or in full operation it's been hard to get the time window to really work on this and get to know the alternative setup. Now lately there is a bit of room to work on it but the history around the issue is vague and the knowledge surrounding rsview and rslinx enterprise is limited, so I'd hope you guys would know a bit more about it after my explanation. So I can narrow down the bottlenecks better at the next visit. Current Setup: PLC: SLC 5/05 16 CPU with ETHERNET Connection with an 747 - SN/B I/O Scanner for field Connected w/ switch to 2 PC's by Glass fiber The PC's used to be in a master slave setup for Rsview, with added engineering stations for the programming. But have been replaced to two new identical PC's. Whether or not this caused the problem is still vague. These PC's both have RsLInx for Rsview version 2.43.01.23 (PR6) RsView Enterprise and RsView Kepware ( for RsLinx Enterprise in Rsview Studio ) The only addition they have from the old setup is that they also have a logix500 programming added to it. In the screens.zip are some screenshots for the setup. I had limited time. But if you make suggestions on where to look next I might be able to get more. I thought it was weird that the Ethernet setting for the SLC5 CPU seemed to be locked at 10 mbs half duplex. But since the installation was in operation I could not change it. So I need to be sure that it has some importance, before I can shut down the plc for download. Problem: When an operator controls the silo, his input starts straight away. Open a valve or start a dust blower will immediately result in a reaction in the silo. However in the viewer, it will take 5+ seconds to actually get the feedback. This is not only for I/O but also internal bits like setting a motor block from manual to auto will take long to read out. Though the PLC scan time is only 10-20 ms and doesn't have that many crucial parts, the installation works fine. But there have been moments where crucial parts didn't seem to start on screen, while already running in the silo, causing danger in communication. Since it's a small setup I don't see where the lag is coming from. And the network and card seem fine. My question: What is most likely to be the cause of theses communication problems? So I can have a plan of "attack", next visit at the silo. Thanks in advance, Migel Screens.zip
  10. GX Developer

    hello, I have just joined Mr PLC so apologies if my question is answered elsewhere that I ought to have seen. I have just started to learn GX Developer and have produced a basic ladder diagram with just six rungs. When I print it A4 the result is far too small meaning any text cannot be read. I can find no way of making it print "fit the page" Can anyone advise me? Roger
  11. Cable Lugs for Allen Bradley PLC

    I am using Allen Bradley PLC CPU 1769-L35E, MODULE 1769-****. What Cable lugs can you recommend for me to use? Are there any particular Manufacturer that can you suggest? I don't want to use Fork type. Maybe tubular or compression lugs. Klauke is kinda big. Thank you!
  12. Writing 2D array to RS5K tag

    Is there way to write a VB script that can write an Excel table into a 2D array for RsLogix 5000? I have looked around for proven examples, but so far have come up unsuccessful.
  13. Hi there! I have CS1G-CPU42-V1 PLC and I have Cx_programmer V6. I want to connect the PLC/Program to my personal computer. So what type of cable should I use? Is this the type to be used? Does it normally comes with a cd driver? And do I have to identify the ports so my computer knows which input it is? << example photo only Please help me, experts. Thank you!