Search the Community

Showing results for tags 'programmer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 122 results

  1. Foreign Comments

    I have a program that was pulled from process that came from China,i believe. the comments are complete gibberish. are there more than one version of cx programmer for different countries, i thought we were past that with the commentor, however these look like some of the old double character stuff i saw back in the old nt tools.   Thanks Joe Meyer
  2. Hi all,  I am having trouble with Cx-programmer when trying to remotely connect to a Omron plc (cj2m cpu34) using Tosibox vpn. Set up is that the Omron plc is located in customers facility and is connected to a Tosibox "lock box ", and i have the "key". From the Tosibox key side application i can see that the PLC is connected to the Tosibox lock and is available. The problem is that in CX-programmer, when i try to search for available devices (by using the PLC->Auto online-> Ethernet/IP node online)  i cant find the PLC i am looking for, or any other device connected to the tosibox network. Just gives a empty list. Before searching the cx-programmer ask's me to choose interface card, showing my Ethernet and Wlan - connections, i have used Ethernet one. I have tried matching the IP addresses in network connections settings for the Ethernet connection but for no avail. And apparently this connection has worked before, i just have no idea how it was done or what were the settings or methods they were using.  I'm not sure but i have a gut feeling that somehow the cx-programmer cant recognize (or connect to) the Tosibox vpn connection and proceeds to search without it and then of course finding nothing. Could it have something to do with the network interfaces? That when i use the Ethernet to connect, it doesn't go trough the vpn? I am not really familiar with these system so any kind of help would be much appreciated. So my question: has any one of you ever encountered something similar when dealing with cx-programmer, tosibox or vpn's in general?   Thanks in advance.      
  3. Please Help me, I want to connect aczet brand weighing machine CG203L to PLC CP1L-M. But several times I tried it didn't work, I've tried repeatedly in the settings section to adjust the baud rate and mode and have tried one by one but to no avail. Can any of your friends help? thank you
  4. Hi all, I'm new here and need an opinion from you guys on how to set the Gateway for PLC CP2E in CX Programmer ? From my discussion with supplier (OMRON), they mentioned it was unable to set any gateway for CP2E model but I found on some sources that for previous model for CP1L is able to set the gateway. Supposed to be the Gateway function can be supported by latest model, am I right ? Need an explanation on this, Thank You
  5. Hello every one in this video, you will learn about Omron PLC PID Control (CX-Programmer) you could see it for free by using the below referral link for 5 days. https://www.udemy.com/course/omron-plc-training-course-fa/?couponCode=0384FB604CD8E26CDD09 I hope it will be useful for you.   Regards Mehdi
  6. How to upgrade CX Programmer Version 9.54 running in widows XP to widows 10 or higher? Really appreciate your response. Thank you in advance.
  7. Hello everbody i need a little bit of help with my counter. So basically i have a counter that shows numbers on a hmi screen and when the counter counts down from 10 000 to 1000 i need to create a function that make that my right numbers picks up the numbers from the middle counter and countinues to count down. any tips on how to program this in cs/cj
  8. Adding time

    Hello im working on CS/CJ I basically need tips on how to add time(1 year) to my instruction block which is a "=(300)" block. my seq is that after the whole sequence is done its going to add one extra year to the hex numbers and its going after the RTC
  9. Hello everybody Im going to have function were a pop up screen is going to come on a hmi screen every time you push the start button and its going to be like this 14 days then its going to go back to normal (no pop up page) im wondering if anyone knows a good way to program this in a CS/CJ Environment ?
  10. day counterdown

    Hello i need to make a program something that counts down 365 days from a set date. and i cant really find a instructions for it, does anyone know a way to program something like this thanks for any help
  11. need some help in writing a programm

    HI Everyone, i m quite new at PLC programming. I have to wite a programm for long product rejection. Now i have used a sensor to detect the hight of the product. As soon as the long product is detected it sets a bit and this bit works as input for a counter now for counting i have used another sensor signal which is the chain pulse signal.For blowing the product off i have used a pneumatic solenoid valve. after the long can is detected the counter reads 3 pulses of the chain pulse sensor and as it gets third pulse it generates an output. after the out put is on with that output a off delay timer is on which holds the solenoid valve on for 5 ms and as soon as the timer preset value is reached it resets the sequence. Hope i could explain the purpose and process i m going through. Now the issue is if there are continuous long products on the conveyor after the first product is detected After that till the time the counter is reached and that product is blown off all the other long products get through how can i drop all the consecutive long products. u can find the program in attached file  Thank u model.cxp
  12. Hi, I need help with my program. How do I include the fractional part of the position I set for encoder? I have an Omron PLC and using cx programmer.  I need to command my servo (from HMI number input) to move to a certain position. Now using a manual computation, my servo is supposed to move 95.65mm, however, using my plc program, the resulting position doesn't include the 0.65. I used the FIXL instruction to convert my result from float to 32 bit and it removed the fractional part of the value.   Thank you!
  13. Hello guys I am a beginner in FINS TCP communication and I am trying to do a FINS TCP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10 tcp socket_vms.cxp
  14. Wait Command

    Hi, I'm quite new to the PLC programming, I saw this delay input in one of the videos, that automatically switched to 1 after a set time, it wasn't a timer, just an contact input with time delay
  15. Hello, I wonder who can help me out here. I am new to the CX programmer. I want to communicate to selema drive through CX programmer. The drive is IPS plus Selema. The company was gone in 2017. There is no manuals regards to the drive. Here is the issue, in the program. The SPED block show port specifier is 10, the INI blcok show Port specifier is 0. Refer to the PLC picture, my first questions which one is port 10? I think port 0 is the left bottom cable from the second picture. So port 10 is the last module?  Second, Do anyone have manual or knowledge with the selema drive? Is there another one to communicate with the drive not using CX programmer?   thanks
  16. Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!  
  17. MOV multiple data

    Hello, Making program on CP1L-E, is it any better idea, then MOV DXXX to DYYY if i need to transfer more then one simultaneously   (at this sample i change speed on transporters (16 of them) according product is on) Dxxx.bmp
  18. "PLC No Response" NB HMI Omron

    Hello Everybody, I continued to work on project this morning but I seem to be plagued with the "PLC No Response" error. This error will only come up when I assign a PLC address to a particular object.  I have followed the steps in the post(https://forums.mrplc.com/index.php?/topic/39885-nb-designer-hmi-plc-no-response-error-solved/) to try and clear the error but am having no luck. In the screenshot I have assigned the large "Start Process" as a bit button with the write address being W50.00. When the button is pressed it should trigger a bit in the PLC but this is when the error appears. During this test I am connected to the PLC and in run mode with the PLC and HMI address assigned correctly. I have read and followed the section in the manual regarding "PLC No Response" but still no positive results.  I just want to check that there is nothing I have done at a programmer end that could cause these issues. I am happy to provide files. Thanks, Ryan  
  19. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,
  20. How to use NB Data Logging

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks
  21. hello Every one,    I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand.  I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000.    Can any one suggest me best way to do.  Thank you   attached file is for what I did in setting and program for the communication.      
  22. Good Afternoon, I am new to CX-Programmer so excuse this question.  I have written a FB in ST to trigger BOOL and Integer variables. Within the FB I have written ST with a case statement which is working correctly. The issue I am having is that It seems the integer variables in the FB (HMI_Q_FAN_STATUS) are not being passed to the assigned global variable (assigned to D register) on the output of the FB.  In the attached screen shot, the FB is in case 3 therefore the integer variable should display HMI_Q_FAN_STATUS=3, however is still displaying 0. Any help with this would be great. Thanks and have a good day.  
  23. CP1L PLC network communication error

    Hello all,   I have a master PLC(CJ2M) which is communicating with slave 4 slave PLCs(CP1L). one of the PLC have communication error, upon checking in cx-intergrator it shows that all the other slave PLCs and other components are connected to network-1 and faulty PLC is connected to network-0. Unfortunately, I couldn't change it as cx-intergrator doesn't allow me to change download the changes. So anyone can please help me with this issue. If you know the troubleshooting way then please reply.    Thanks in advance.    -Yash
  24. INDIRECT REGISTER

    i want to use indirect register, but why contact 100,IR0 is not ON, is it my program correct?
  25. I have been attempting to connect to connect to a couple of PLC's that are in some of our slide gate conveyors (CTI). I do not have a lot of experience with PLCs. Took a class on it a few years back, but haven't had much hands on experience since. So last year we had a technician come in and add a rung to the program of the CPM2A that allowed the PCB to hold at the out sensor and for the incoming machine to not accept the board until the conveyor is fully extended. What I was tasked with was checking the program in the CPM2A and applying that additional rung to the CPM1A on the other line. Unfortunately I cannot connect to the 1A and when I attempt to connect to the 2A it tells me that I am trying to connect to a CQM1 instead, but that's not what the PLC physically shows it being.  I have the CS1W-CIF31 cable and the CPM1-CIF01 as well. I am using the correct port (COMM4). Port settings are 9600, 8, even, 2. In CX-Programmer, I am clicking New > Device type (CPM2A) > Network (toolbus).... When i connect to the 2A it tells me its a CQM1... SO when I change the settings to that one and compile the program it shows me a very weird program. Doesn't seem to have any real instructions. Maybe I don't understand the program?  When I try to connect to the CPM1A-30CDR-A-V1 I just get a failed to connect every time. I Open CX-Programmer, New, Device type (CPM1A), Change CPU settings to CPU30, toolbus, etc.... Failed to connect. I have been trying to figure this out for a few days now and haven't gotten very far. I have tried to connect with Omron and haven't gotten far from there. Any Help will be appreciated, I'm very noobish sorry lol