Search the Community

Showing results for tags 'program mode'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 90 results

  1. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  2. Looking for Socket TCP/IP communications program examples for Mitsubishi PLC iQ-R R04CPU using GX Works3, to compliment the Mitsubishi Ethernet manual Socket commands instructions. Unfortunately, the manual is missing real application ladder logic illustration examples of these commands. For example, the Socket Open Connection command, does not describe in what order or format to enter the IP Address.   For example, to enter IP Address 192.168.1.100, does the most significant octet 192 is entered or stored first in the lowest memory storage register (Big Endian format) or does the least significant octet 100 is entered or stored first in the lowest memory storage register (Little Endian format)? I am trying to write a simple Socket TCP/IP communications command that will write about four registers from an existing Mitsubishi PLC R04CPU (Socket Client) to an Allen Bradley PLC ControlLogix (Socket Server). .
  3. Hello,  As the title indicates, we have a micrologix 1400 that has been installed for a long time.  Recently it faulted out on 71h and was in Remote Mode.  Do these PLCs revert to Remote Mode when in a fault condition?  We placed it back in Run Mode and everything worked fine, but how did it get to Remote Mode in the first place? Thanks,  J 
  4. I'm using Controllogix L61 redundancy system as a slave with DCS using ethernet tcp/ip socket programming. The communication between master and slave will fail after a switchover. Kindly give solution for this. Thanks and regards, Rasu
  5. CX-Thermo program

    Hello, I am working with e5cc-t programs, for heating application. I need to find a way, to start program, when temperature reaches set-point of first (no. 0) segment. I think that, there should be some kind of setting, but i cant found it.. I've done this with PLC, but this is not an solution for this application. in conclusion: After program starts, it has to reach set point temp, and then hold temperature for certain time.  
  6. Version 2.0.2

    792 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  7. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  8. Binary Mode vs BCD Mode

    Hi all, I have created a program using the binary counter and timer instructions and everything works fine (yay!), but I am not entirely sure if there is a major difference between using Binary mode or BCD Mode on the PLC. Does it just come down to personal preference or is there an advantage to using a particular mode over the other? Also, does the operating mode affect anything besides counter/timer? The option in CX-Programmer seems to indicate it doesn't. Cheers, Jay
  9. I got a CJ1M CPU11 that I can connect to but I can just go to run mode but when I try to switch to program mode I'm tell that I can modify the mode
  10. Dear Friends; Good day. First i install the windows  virtual xp mode on Windows 7 64 bit. After installation i installed the FTM, RSLINK,and rslogix 5.0 in virtual xp mode.  Then i activate the software by Factory talk manager and select the hard disk and for a single computer activation. This process successfully acomplished. But when i open the RSLOGIX it shows popup that activation path is not found. Then i again open the factory talk tool and note that there is no activation shows in current activate products, But the activation detail shows in the RE host tab. I re hosted the activation by using go to Rockwell site and message show successfully activation re hosted.   *** Now i am stuck here is i loss my activation?  *** in windows xp virtual mode how i activate my product that application find the correct path of activation file? ** In windows xp mode if i open my Computer there is shows other hard drive partition as well as Local disk C:\  and activation file save in virtual drive instead of real C drive in windows 7. But there is no file path option to save the activation. Its by default save on C:\documents and setting\all user\shared documents\rockwell\activation\*****   Please help me how i activate my product in windows XP mode successfully?  Thanking you. i will remain Regards  
  11. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  12. I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
  13. IPC 620-1536

    HI, there. I am new to the Honeywell PLC, usually dealing with AB or Omron. Need some help from the Honeywell PLC gurus, my the only one PLC IPC620-1536 , suddenly stop working. No "Run" light or any outputs are present. Turning the "Mode Key" to the "program mode" and back to the "run mode" doesn't make any difference. I attached couple photo. My question, is any other way to start PLC running again? If I purchase the Win.Loader and communication cable and connect to the PLC, can I change PLC back to "Run" mode and upload the program, or fail to change the Mode using the Key. means the same fail using the software? Please update. Thanks for advance, 
  14. Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
  15. Beckhoff PLC Counter

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool
  16. ST program step count

    Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?
  17. Hi! I have my 1756 IF8 wired in high speed differential mode but i can't configure the RTS smaller than 11 ms. What I understand it should be possible to set as low as 5 ms if module filter setting is 1000 Hz. Is there anything else that i have to do?
  18. project or PLC mode

    Hi, I keep getting an error that project is in binary mode and plc is in BCD mode.  Wont let me change either. I must be trying in the wrong place...please point me to where i can change this in the PLC.   I am getting an error in my RXDU with a Honeywell barcode reader, on one machine, I am thinking it is related.   thanks for any help. 
  19. Brian B

    I need help with a program I wrote for school that didn't work quite right.  I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1.  The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final.  Can anyone help me out??
  20. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf
  21. Auto Run Mode after Reboot

    Hi guys! Im new in using PLC and im using CPM1A, is there a way setup the plc to run mode immediately after rebooting it, also even without connecting it to PC or handheld device? I saw in the manual "Startup Operating Module" but i am lost, i dont know how to configure it. Thanks for your advice.
  22. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  23. Program not comparing

    Dear Sir, I need to update the PLC program offline with online, so I tried to compare the program blocks but I got the error that The comparison of the two blocks in STL showed that codes are identical. But still when I want to go online it is giving error that codes are different. Can anybody help us in this? New Microsoft Excel Worksheet (2).xlsx