Search the Community

Showing results for tags 'program cable'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 99 results

  1. A machine was bought at auction which included PLC-5/15 module.  It did not come with a backup of the program.  Our maintenance technician said the program would not load and turned the module over to me (IT).  I notice the battery was installed in '92 so am assuming the program is lost.  Is their any internal memory or last ditch effort i can attempt to recover the program from this module?
  2. Hi Guys! You can read my problem below, if anybody can help, please do it. Thank you. So, I have 4 knife. You can set the cutting width for each knife separately. The problem is, there is a lot of size. There is an example: No1 size:  #1: 20 mm, #2: 25mm, #3: 30mm, #4: 25mm   (#1=Knife1.......)                                       No2 size: #1: 22mm, #2:24mm, #3: 32mm, #4: 27mm What is make the problem more difficult is There are plenty of type code too. Like X1, X2, X3, Y1, Y2, Y3 ..... This is the main material code. and you can choose the belogging size. So you can select for X1 to No1 or No2 ... but you can select for X2 to No1 or No2 or any sizegroup you want. I can solve it with a lot programming, like deal every possible situation ... but there is a lot time .... :S  There is a touch panel where you can set the values.  Anybody have another idea for this problem ?    
  3. We have a QSeries PLC. Q25HCPU. We also have a PLC program. We found that the address registers (also known as device addresses) attain a z-value added next to it - automatically over time. We are not sure why this is the case. Nonetheless, when these values get added (by the PLC - not the engineering software), some of the functions in the PLC doesn't work. We found that by formatting the CPU, and reloading the program, allows for the system to work again (temporarily) for a few weeks, up until this problem occurs again. This problem occurs across various CPUs (eliminating the potential for hardware problems. These z values can be seen when a program comparison is done. (see attached file). The questions become; 1. What is the function of these values? (why does the PLC add them? 2. How can they be permanently removed?
  4. We have a QSeries PLC. Q25HCPU. We also have a PLC program. We found that the address registers (also known as device addresses) attain a z-value added next to it - automatically over time. We are not sure why this is the case. Nonetheless, when these values get added (by the PLC - not the engineering software), some of the functions in the PLC doesn't work. We found that by formatting the CPU, and reloading the program, allows for the system to work again (temporarily) for a few weeks, up until this problem occurs again. This problem occurs across various CPUs (eliminating the potential for hardware problems. These z values can be seen when a program comparison is done. (see attached file). The questions become; 1. What is the function of these values? (why does the PLC add them? 2. How can they be permanently removed?
  5. Hi guys, I am setting up my test rig, to learn more about modbus communication.  My test units are CJ2M-CPU31,  SCU42 and 2 units MX2 inverters.   I have already downloaded manuals W494 and W336, and I am searching for the type of RS-485 cable to be used.   What type of comm. cable are you using, in setting up your modbus connection? Could you please share your preferred type of cable. Thank you. Cheers. Leo
  6. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  7. Looking for Socket TCP/IP communications program examples for Mitsubishi PLC iQ-R R04CPU using GX Works3, to compliment the Mitsubishi Ethernet manual Socket commands instructions. Unfortunately, the manual is missing real application ladder logic illustration examples of these commands. For example, the Socket Open Connection command, does not describe in what order or format to enter the IP Address.   For example, to enter IP Address 192.168.1.100, does the most significant octet 192 is entered or stored first in the lowest memory storage register (Big Endian format) or does the least significant octet 100 is entered or stored first in the lowest memory storage register (Little Endian format)? I am trying to write a simple Socket TCP/IP communications command that will write about four registers from an existing Mitsubishi PLC R04CPU (Socket Client) to an Allen Bradley PLC ControlLogix (Socket Server). .
  8. Programming cables

    Is there any website that provide all details about programming cables for all PLCs.  I have one local Indian plc "Genie NX" manufactured by GIC India. I want to make programming cable for same. but unable to get details. please let me know if anybody used it? http://gicindia.com/index.html for more info
  9. I'm using Controllogix L61 redundancy system as a slave with DCS using ethernet tcp/ip socket programming. The communication between master and slave will fail after a switchover. Kindly give solution for this. Thanks and regards, Rasu
  10. CX-Thermo program

    Hello, I am working with e5cc-t programs, for heating application. I need to find a way, to start program, when temperature reaches set-point of first (no. 0) segment. I think that, there should be some kind of setting, but i cant found it.. I've done this with PLC, but this is not an solution for this application. in conclusion: After program starts, it has to reach set point temp, and then hold temperature for certain time.  
  11. Version 2.0.2

    792 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  12. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  13. I got a CJ1M CPU11 that I can connect to but I can just go to run mode but when I try to switch to program mode I'm tell that I can modify the mode
  14. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  15. I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
  16. Profibus Cable

    Dear Friends; Good day. we have CNC grinding machine with S 7-300 control system. The profibus cable run about 25 meter around the machine. In that length 2 meter wire found short. Please guide me  1. Is change the cable completely?? 2. Can i make a joint by buy 2 meter cable only? If Yes how i join the cable by using profibus connector or simply as twist the conductor with each other?   Regards
  17. Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
  18. Beckhoff PLC Counter

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool
  19. ST program step count

    Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?
  20. Hi , I need help in assigning Link refresh setting between PLCS ,B and W address exchange between QCPU s and  two DOPL module  connected in ring network configuration. We  have used qj71lp21-25 in 5 cpu station.    
  21. Hello to all! Kindly provide me 1-Download link for RS logix 5000 v7.2 .i have a program which is designed in old version of Rs logix 5000 and i m unable to open it on v20.0 2- ControlLogix 5550 1756-L1 controller Serial Cable pinout [plc to pc]-Programming cable Thanks
  22. Hello I tried to go online with MicroLogix 1200 through "1761-CBL-PM02 Series C" serial cable. I read its manual and it says i can use the cable to go online. I got these errors and i attached them. Can someone tell me why i am getting this error? Thanks for reading and have a good day !
  23. Brian B

    I need help with a program I wrote for school that didn't work quite right.  I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1.  The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final.  Can anyone help me out??