Search the Community

Showing results for tags 'problem remote communication (input which is not displayed) via devicenet'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 306 results

  1. Hi,   I am attempting to download a Vijeo designer application to a remotely situated Magelis HMI over the cloud by means of a VPN. Vijeo designer's built-in help indicates that this is possible and has provided an example.  BTW, I am using Vijeo Designer basic v1.1 & the HMI model is GXU3512.   However, I find the fields for router IP and TCP port nos. all deactivated  
  2. Communciation Error plc with PC

    Dear All,   Am new to Siemens plc. i have CPU 315-2DP. but when i try to communicate with pc through simatic Manager . i receive the Following Error. " Unable to establish a connection with module ." Sometimes it gives error as attachments. kindly help me out.    Through control panel , i have selected the PG / PC interface to S7 Online with PC adapter Auto 1.   Kindly help me out. you will be a life savoir.   Regards, ZUbair
  3. I am trying to POST API to a meter in Maximo using a socket in a 5069-L320 controller. I am able to successfully create and open the socket. The write and read instructions get the DN bit but I do not see the meter updating in Maximo. I was able POST successfully using Postman, so I know I am sending the correct information. Do I need to be formatting the POST differently? I'm not getting errors so don't have a direction to go from here. (I will fix the obvious username and password vulnerability, one step at a time) Thanks
  4. serial input string

    Hi  I'm quite new to plc but very new to mitsubishi.   I have an input string eg G+002.7 which represents a weight. I wish to take in the input string then move/convert to int omitting first char,   On other plc's i have been able to use a modifier like d200[2] then the no of chars. How do i achieve this in gx works3   Any feedback gratefully recieved   Paul  
  5. Hello Everyone I am new on this forum. As an electrician in Denmark, I have just gotten a fountain to maintain. The control cabinet and pumps are all underground in a couple of wells.   There are a lot of monitoring and time is spend / wasted lifting the heavy manhole covers and driving to and from the wells. I would like to install a plc to monitor the few settings I really need. Are there some with experience of how and what type of equipment?  I am considering a siemens LOGO with a communications module and just buy a sim card.  Is it better to use prepaid 2G, 3G or 4G or only data sim card?  Also with or without pin code? It is not possible to establish a wired communication connection but the wells have of course 230 V mains and is very close to a phone tower. Yours faithfully Morten Lund
  6. CP1E won't connect or run program

    Hi there! Today a CP1E-E10DR-D suddenly stopped working. RUN led was off and I couldn't connect to it via USB getting this error: "Selected port does not exist. Select proper port number from Change PLC dialog and press OK button", and automatic online function didn't work as well(it's not a cable/driver problem since I successfully connected to a CJ2 CPU using same cable and PC). Since I also tried to connect with the CPU outside the control cabinet with no success, I asume there is something wrong at hardware level.  My question is, have you ever faced something like this? My plan is to try to revive it somehow (maybe trying to locate any defective component in the PCBs or something). So I was just wondering if you have any advice in order to achieve it.  Thanks in advance!
  7. Hi,I want to read transducer signal on PLC.I am using 7kg60008ab/nn transducer and it's analog (4-20mA) output is connected with analog meter.Can I connect the transducer current output (4-20mA) signal to PLC analog input in series with analog meter display???So that I can read the value on PLC simultaneously with analog meter?
  8. Hmi modbus TCP/IP device communication

    Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?  
  9. Hello, has anyone noticed that plenty (not all) forum posts are changed to quotes from TWControls? What is happening here?  Hopefully only a momentary breakdown  
  10. Output polarity selection

    Hello to everyone. Nice to meet you all. How are you? I hope you are doing well. I’m developing a program with the purpose of make something similar to a pulse train in the output. However, sometimes I need the output to be a “positive” pulse and sometimes a “negative” one. By positive and negative I mean the polarity in relation to the pulse train source. I’m trying to use a pair of bits in order to switch between the two choices of polarities. I attach a simplified version of the ladder diagram I’ve made. When I thought about the logic, it seemed logical to me, however, it isn’t working as supposed. SM0.4 is a pulse train source. According to the software manual, it is a pulse train with 50% duty cycle and a cycle time of 2 s. That it to say it says at TRUE for one second and return to FALSE for another second. I assign the value of that variable bit to the M0.0 memory bit. I get the negative version of the pulse train logically negating it in the Network #2.                 I assign the value of two inputs, I0.0 and I0.1, to other two memory bits, M0.1 and M0.2. ·         When both inputs are in a FALSE state, the output stays FALSE, disregarding the state of SM0.4. (Case #1) ·         When I0.0 is TRUE, M0.1 is TRUE. However, Q0.0 stays at FALSE no matter SM0.4 is TRUE or FALSE. I attach a pair of pictures. (Case #2) ·         On the other side, when I0.1 is TRUE, M0.2 is TRUE. In this case, the output shows the correct behavior. It is the negated version of the pulse train source. (Case #3)                 Has any of you experienced something similar? Is there a better way to execute my purpose?                 I’m not executing the program, just simulating it with KincoBuilder from Kinco. However, it has always worked fine for me. Thanks for you attention. I look forward for your responses. Kind regards!
  11. Hello! I am working on a quote for a new project that will use EtherCAT but also requires DeviceNet for some legacy components.  Has anyone successfully used the Beckhoff EtherCAT coupler (EK1100) with the DeviceNet Master Terminal (EL6752) and an Omron PLC as the EtherCAT master? My concern is that the coupler will only communicate with the Beckhoff EtherCAT master, but since it is so much more expensive to get the new Omron parts to communicate DeviceNET i am hoping this could be an option.  The equipment is extremely simple and price is a major consideration.   Thank you!!!
  12. j’ai un probléme au niveau Unité DRM21 via Network Device Net et aussi l’un des paramétré(température, Résistivité) qui n’est pas affiché dans la partie supervision(Remote), mais il s’affiche localement.
  13. HOSTLink read multiple DMs

      Hello,    I am using Hostlink protocol to read data from PLC units. for example @00RD22220001..., will return DM2222's value. But I want to know, if I could read multiple DM values at the same time. for example: DM2222, DM3000, DM4000, reading these DMs with one communication. Please note that these are not continuous DM areas. I know a sequence of DMs can be read by specifying starting address and count.   Many thanks in advance.   Ting              
  14. Samsung n700 plus

    Hi everyone,after initializing  cpu in Samsung n700 plus ,I can't  enter variable value in hmi and all parameters is zero. Again I load program to cpu but not success. please help me.and I need manual for n700 plus plc .
  15. Here is a post that we recently completed on the Automation Direct USB to RS485 Adapter.  The USB-485M is a 2-wire USB to RS-485 serial communication adapter for RS485 use. It does not require an external power supply or complicated configuration. It has a Type A (plug) USB connector for the computer side and a universal female RJ45/RJ12 modular connector. This will accept RJ12 and RJ45 plugs.  The USB-485M supports multiple baud rates and is USB V2.0 Compliant. Read the rest of the post... YouTube Video on the installation and communication to a Solo Process Temperature Controller via Modbus RTU. Let me know what you think, Garry  
  16. RS485 COmmunication

    Hi all, i am looking for a solution to connect 7 plc with a single scada. is it possible according to my topology diagram ?   Kindly make me suggestion and if you have any information regarding the solution then share .   Thanks in advance. 
  17. CP1W AD041

    Hi.. I have a problem with my analog CP1W AD041, it's reading value always "0". Can someone help me to configure software setting? I use PLC CP1E-N60SDT-D Thank you        
  18. Good Morning,   My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. is lift station 104, is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ?   
  19. unit of time in D8284

    Hello PLCmaniaccccssss, What is the unit of time in 'average time for the channel -1' (D8284) while programming for analog inputs? I have moved k10 to D8284 in my program in gxworks 2, does that mean the time average will be taken for 1Sec or 10msec or any other time unit??? I require this to eliminate the flickering of the input from the load cell transmitter. Thanks and God bless!!!
  20. Hi all, I am trying to communicate KEPServerEX with FX3GE vis UDP protocol. I have tried but unable to get data on Kepserver. While configuring communication properties in PLC we have configured PLC IP, PLC Port, Destination IP, but unable to find correct Destination Port. Although we tried various port nos like 49320, 57412, 57512, 56233, 1025, 32402, 57212, 57012, 57612, 57812 but there was bad quality data using UDP For same PLC using TCP/IP we were able to read all tags properly. This change in communication protocol is required as there are some PLCs whose communication port drops after few days of connection establishment (no error logged; can be re established with just restart). Someone from Mitsubishi said to try communication via UDP as it continuously fetch data regardless of kind of response received. If anybody has tried or have any solution, please do share.   Thanks
  21. Hello all,  I have a temperature sensor with a reading range of 10F to 212 . The input card I am using is an Allen Bradley 1734 IE8C 8 Channel Analog current input. The current input values are 4-20 mA. Currently I have my raw low at 4000 and raw high at 20000. Can anyone explain how do we go about selection of this values ? I found these values in the configuration tag of the input card properties.  Thank You 
  22. Hello, I would like to know the best option for adding remote I/O stations to either the R32CPU or R32ENCPU. I like the look of the Mitsubishi NZ2FT / Weidmuller u-remote slice I/O. I believe they are the same product. There are CC-Link IE TSN network couplers for these systems. Would either of these be a good choice? I see the R32CPU has a port supporting CC-Link IE Field Basic. Can I communicate with CC-Link IE TSN devices using this port? The R32ENCPU add a couple of ports which can support regular TCP/IP communications, CC-Link IE Field and CC-Link IE Control. Do these ports also support communications with CC-Link IE TSN devices? Is there a difference between CC-Link IE Field Basic and CC-Link IE Field? Thanks,
  23. Hi, I managed to communicate a Kinco HMI with a Xinje PLC (XC3-48R) using RS-232. Also, I've established connections between the both equipment and my personal PC, for programming purposes. Currently the uploading and downloading, PLC bits reading and writing happens normally. But, when I disconnect any of the equipment from the PC, (HMI or PLC), the communication is lost between the PLC and HMI.  How can I solve this and, remove my PC from the network by making the HMI master and PLC slave ?    The software I use for programming is, (XCP Pro, Kinco HMIware)  
  24. FX3GE Communication issue

    Hi all, There's an issue I am facing for multiple FX3GE PLCs in a plant. Communication breaks between a PLC and OPC server. PLCs after few days (4-10) does not respond over ethernet. No ping response is received over network as well as when checked one to one direct connection. If I restart the PLC the connection is resumed and again after some days it goes down. Error LED on ethernet port does not glow red (no indication for error). If anybody has faced similar issue and has resolved, please share.
  25. NS Runtime 1.30 v 8.1

    Hi  I prepared test application (attachment) and all the time when I start Runtime I get error: "Failed to initialize communication processing. Exit the application except Run and re-start the system." I think I did everything correct. Below my specs. CX Designer 3.730 NS Runtime 1.30 NS Runtime is on PC WIN7 64 bit  res. 1024x768 Maybe you can help to find the problem     test3.7z