Search the Community

Showing results for tags 'printer driver'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 48 results

  1. Proface with Serial Printer

    Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks. 
  2. Hello guys, I am very new at this. I am trying to make a Schneider PLC (TM251MESE) to send some serial commands (485)  to a integrated stepper motor from Automation Direct (STR-MTRD-17030RE, but I am lost. The driver has been program to receive the SCL commands. But not quite sure how to send those from the plc. Im using SoMachine V 4.2 Have any of you done anything similar? Any example will be greatly appreciated.  Thanks 
  3. I wish to print from a Panelview Plus 7 1500 to a Konica Minolta 'bizhub' 4402P. The printer is not on the same network as the machine but is reachable through a router to the corporate network. I already have this working on one machine but don't know how we succeeded in setting it up. The setup that works is: Manufacturer: Hewlett-Packard (it's actually a Konica Minolta 4402P). Model: Color LaserJet 3800. Port  10.xx.xx.xx (the WAN address of the printer). Driver: wt5hpspd.dll (v52.1070) We never had a Color LaserJet 3800 but we may have had a black and white HP laser printer that worked with this driver and now works with the Konica when our IT department replaced it. When using Add Printer the system tries to connect with the specified IP address and fails (even though we can ping it) and then the drive installation stops. Does anyone know a way to force the installation so I can try to replicate the working setup?  
  4. CP1L-EL TCP/IP with VideoJet Printer

    Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
  5. [ASK] Driver for FX3U-USB-BD

    Dear all... I am new here. I have a problem when connect my laptop to new PLC FX3U series. There was sign that I must update a driver for FX3U-USB-BD. Where can I get it for free? Could anyone here help me to share a link please?   thanks! Haniv
  6. FX5U SERIES

    Please find attached presentation of OMRON PLC . we have same requirement of Mitsubishi F5U series. Please suggent and send the sample programm. barcode.pptx
  7. Wonderware DASMTEthernet Driver

    I have a client who is duplicating an existing Wonderware SCADA/MELSEC Q Series with a Wonderware 2014 R2 configuration, which they want to maintain that version.  The driver they use is the DASMTEthernet, which is no longer available from Wonderware.  I'm looking for any lead I can find to get hold of this driver, or a good solution to resolve the communications.
  8. Siemens IPC477D Touchscreen Driver Needed

    I have reloaded a IPC477D with Windows 7 64-bit and everything is working but since we do not have the original installation disk or ISO, we have no way to load the touchscreen driver. I am looking for any information that would lead me to the OEM for the touchscreen or if anyone has access to the IPC installation DVD, all we need is the touchscreen driver directory which should have both the 32-bit and 64-bit version. Siemens tech support indicated we must repurchase a installation DVD for $350.00 and it would ship from the fatherland and be here in about a week. Thanks in advance.
  9. MBE Driver can't save config file

    Hello!I am using MBE Driver v7.46b on Windows Server 2012 R2. Problem is that I can't save config file. I can edit Channels, devices and data blocks, I can see incomming values, I save a file without any message. But config file is not saved. In Event viewer I get error as you can see on picture. It says: Error writing to system registry: Driver App 00000001 \Driver defaults. Other error says: Error writing to system registry: ServerMsg 00C54BB8 \Driver defaults.Is it server or driver problem? Please help. At the moment I can't edit anything in driver so I can't configure it to use it with my SCADA iFIX 5.8
  10. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!
  11. Hello! I am trying to connect my PLC with SCADA. I am using S7-1200 1212C CPU (RELAY outputs). My SCADA system is iFIX 5.8 with driver S7A. I am trying to establish connection via GPRS router (TCP/IP). Port being used is 102 (default by S7A driver). In my company we have private network, SIM card in GPRS router gets static IP (set by RADIUS server)  which is 10.247.XXX.XXX. My PLC has IP 192.168.0.10 set in Project. I am not sure what am I doing wrong. How to correctly set IP address in PLC to communicate in private network via GPRS router with static IP? I already enabled TCP port 102 in my router but I am not sure to which IP should I enable it because I am not sure if IP address set in PLC is correct. Should I use some communication blocks in program? I also enabled PUT/GET function (see attached pictures). Please help. Thanks in advance! :)  
  12. does anyone know about usb driver cx programmer for windows 10 64 bit? I can not upload / download programs without this usb driver. Please tell me if anyone has or there is a link for this, Thank You.
  13. Hi, I've been working with RSLogix 500, today i found that i was unable to connect to Micrologix PLC because in the RSLinx the Driver Ethernet IP that was configured to communicate whit PLC appears with a Red Cross. Yesterday everything was working. I've installed an antivirus software, i supposed the reason was the antivirus, but i've tried on configs and even uninstalling it, and RSLinx seems that can't reconigze the ethernet adapter (guess that means red cross) RSLinx 3.51 CPR 9 SR 5.1 RSLogix 500 Pro 9.0 Windows 7 Ultimate 32 bits Could you, provide to me some guidelines to solve this, or if somebody has had this problem, could share the solution? thanks in advance
  14. Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture.  https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.  
  15. View File GE SRTP Ethernet Driver for .NET .NET Component for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE SRTP devices via Ethernet. Supports PACSystems, Series 90, and VersaMax.   Supports PACSystems symbolic variables and CPU rack + slot specification. Does not require 3rd party drivers Does not require OPC x86, x64, and Any CPU compatible Visual Studio.NET 2005, 2008, 2010, 2012, and 2013 Compatible Most .NET targets are supported, including Web, Win Forms, WPF, console, and service apps. Build Windows Forms, console, and ASP.NET applications that run on Linux with Mono framework. Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Free 30 day fully functioning trial version available for download Runtime-free for qualified applications   Submitter Automated Solutions Submitted 05/09/09 Category Demo Software
  16. Hello   i have a versamax icu200udr064 and i want to connect it with simatic basic panel ktp 1200 dp  both support modbus rut but the problem is that i cant find GE communication driver on the tia portal by whom i program the HMI.  One more thing is that i found a communication driver for modbus rtu but the tags addresses are in the standard form for modbus, so is there any solution for this?  thanks a lot .  
  17. Mitsubishi SC-A220M

    Please refer the images.Please note down the RED mark in drive image.In my factory their is an grinding machine in which they used this drive to drive the motor.The mainboard was burnt down so i tried to start the motor manually.From the machine I observed,1.It operating in single phase power supply(Given to R and S) and three phase output(U,V,W) is given to the motor.2.STF and SD are given to the control board.3. 10 and 2 shorten down using an small wire.By this they controlling the speed of the motor.My doubts are,1.Is STF and SD are acting as switch to switch ON/OFF the motor..?By connecting an simple switch across the STF and SD to control the motor.If we connected the switch means we can switch ON the motor manually..?2.In datasheet they adviced to use an 1/2W,1K POT to control the speed of the motor.But here they shorted 10 and 2.Byt this way how they controlling the speed of the motor..?
  18. Hi.  I'm running a Windows 7, 64-bit machine.  I have NB Designer 1.4 installed.  when I plug in the nb7w-tw00b, it shows up as "MTP USB device", and that the driver install failed. so I opened Device manager and find the item, I right-click "MTP USB device", and "update drivers".  I click "Browse for my drivers" and navigate to "C:\programfiles (x86)\omron\nb-designer\driver".  I check "Include subfolders".  then click next.  it does not find the drivers.  says "MTP drivers are the best" So I try again: right click the "MTP USB device" but this time I click "browse for drivers", then "Let me pick from my device drivers...".  i navigate to C:\programfiles (x86)\omron\nb-designer\driver.  I select the bulksub.INF file, and i get this error: "The folder you specified doesn't contain a compatible software driver for your device.  If the folder contains a driver, make sure it is designed to work with WIndows for x64-based systems" NOTE: I just tried this on a Windows 7 32bit machine. same problem.  Except the message says "Make sure it is designed to work with Windows for x32-based systems"   Any thoughts to get this to work?
  19. Hi, New to the site,  seeking help with an Inkjet Coder that the company I work for recently purchased. A customer is wanting us to have the printer message selection automated, because parts got out with the wrong print on them. We purchased a Linx 5900 and want to use the serial port on a slc 5/03 to send a command to select the message based on a selector switch's position. I've been pretty desperate trying to find help with this issue, because this is my first time messing with a printer. I've got the AWA instruction set up and it will send a string, but I'm not sure what to have in the string or if I have everything configured right. I've attached the program for you guys to look through, the AWA instructions are at the end of LAD 13. I'm using the serial port to make changes to the program then hooking it into the printer to try the changes out so its a bit frustrating, but I don't have a pc with windows xp sp2 so using the DH485 port is not an option. Any help will be greatly appreciated.   CNTRPUSH_4_2017.RSS
  20. Printing through a Micro820

    Good morning,   I want to connect my Micro820 to a load cell, read its value and then send it to a printer so I can have a generate a label with the product's weight.   I'm open about the printer model but I really don't know where to start and couldn't find any good articles about  it. Does anybody know where I could find some more information about the subject or even program examples? Thank you  
  21. Micro820 Barcode scanner

    Hello, I'm looking to interface a USB barcode reader with a Micro820.  Is there anyway to interface a USB device with a AB PLC?  
  22. DRIVER for cable FX-UBS-AW

    Hello to everybody, can someone help me find the DRIVER for a FX-USB-AW cable, it's for a Mitsubishi PLC FX3u Help please...  and thanks! :)
  23. USB Driver

    Dear all, looking for all your help. I want to read program from PLC. I use PLC Mitsubishi FX3U-128 M connect with GOT GS2107-WTBD. I cant connect with usb communication because i cant found the usb drivers. Can you help me ? Please
  24. Version 1.0.0

    8 downloads

    The OMNI Flow Computer driver provides the ability to communicate with the OMNI 3000 and 6000 family of flow computers. It supports both real-time communications and Electronic Flow Measurement (EFM) for historical data. For real-time only communications, the OMNI Flow Computer driver can be purchased individually or as part of theOil and Gas Suite. For applications requiring EFM and real-time communications, the OMNI Flow Computer driver can be purchased as part of the EFM Suite. EFM capabilities include scheduling and exporting EFM History, Alarms, and Events data to industry standard and custom formats. Features - OMNI.Net Client (Master) for communication with OMNI Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) - Supports all OMNI devices which uses flavor of OMNI Protocol. - Supports 1,3,5,7,9,11,13,15,17 memory types - Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. - Performance - 500mhz Pentium - 10 words: 15msecs - 100 words: 35msecs (avg) - Full implementation of Class 0 and Class 1 OMNI protocol functions as well as a subset of the most commonly used Class 2 functions  This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  25. Omni Flow Computer Driver for HMI/SCADA View File The OMNI Flow Computer driver provides the ability to communicate with the OMNI 3000 and 6000 family of flow computers. It supports both real-time communications and Electronic Flow Measurement (EFM) for historical data. For real-time only communications, the OMNI Flow Computer driver can be purchased individually or as part of theOil and Gas Suite. For applications requiring EFM and real-time communications, the OMNI Flow Computer driver can be purchased as part of the EFM Suite. EFM capabilities include scheduling and exporting EFM History, Alarms, and Events data to industry standard and custom formats. Features - OMNI.Net Client (Master) for communication with OMNI Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) - Supports all OMNI devices which uses flavor of OMNI Protocol. - Supports 1,3,5,7,9,11,13,15,17 memory types - Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. - Performance - 500mhz Pentium - 10 words: 15msecs - 100 words: 35msecs (avg) - Full implementation of Class 0 and Class 1 OMNI protocol functions as well as a subset of the most commonly used Class 2 functions  This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software