Search the Community

Showing results for tags 'position control'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 115 results

  1. I am searching for the Replacement of the Ultra 5000 Servo Drive as i cant get online to it with the Ultraware software over wireless plant network. In order to get online i have to connect serial cable every time. And the Drives are used in time critical assembly line  kind of environment. So is there any other replacement which works as intelligent as of Ultra 5000 and also have additional feature of built in Ethernet port which can help me to get online with it wireless over plant network.
  2. Omnuc U software

    Hi, I have begun to look into some positioning equipment we have had for a while. There is a CQM1 CPU51 connected to R88D-U series servo drives, and a CS1 with C200HW-NC113 and a R88D-U. I have found WinMon on myomron, but not tried to install it yet, will it run at all on a Win7 machine or do I have to dig out some older PC? Same with the NC unit, there is mentioned a SYSMAC-NCT program in the manual, but I have not been able to find this anywhere, Is this still a commercial item? Are there any newer software that will communicate with these old units? If we decide to upgrade any of this, will we have to replace all, or is it possible to reuse the servomotors or other parts? This is all for educational purposes, no production or safety issues involved. I would of course like my students to work with the most updated systems, but unfortunately we are on a limited budget :( Geir
  3. hI.. I've asked for this in the past and, so far, haven't been very lucky.  Most of the projects I run into have 4 or 5 axis, lots of analog and sensor input.. or don't have the HMI part of the "Machine" I have a nice NJ 101-1000 with the NA 7 inch HMI.. along with a R88BD-KNA5L-ECT servo and a 50W  G5 motor.. type  R88M-K05030H-S2.  All On a nice rack with power supplies and some EtherCAT I/O  (It all functions .. even "MC Test Run" gets the motor to jog ..    But.. no way to "home" it.... The motor is in "rotary mode"   but... it's NOT got an Absolute encoder.. it's a incremental... sniff!     I just want it to stop on zero ..Or anywhere, and call it zero ... and make moves plus an' minus in degrees, that's all....  I assume I have to send it some signal (push button) while it's spinning that tells it it's in "Proximity" to home and it then it does something which makes it end up on zero.    I've homed a lot of linear motors (LinMot) an' they are very easy to work with.    But, Omron has 10 different homing modes .. and they aren't very well explained.  Well, they aren't explained at all in that 502 page user manual... you have to already know how to do it, in order to understand the explanation... Example:  Take the "Home Proximity Input Signal"  .. I can imagine what it might do, to help control a move to home.  I can even imagine what's making the signal .. and that somewhere there is a place where the homing parameters are set... like the "axis setting table"  .. but, it's not a Global Variable, or a Data Type .. I could imagine it gets into the system from the CN1 I/O connector? or some I/O somewhere? But.. I grow weary of imagining how this system actually works..  Building a simple working project, from a tutorial, or even downloading a simple working project (.smc2 file) and making the minor adjustments to fit my equipment ... would make all the difference in the world.   I've searched Omron's Libraries of .smc2 files.  Haven't found any yet that aren't on the level of "Top Gun" (a seriously complicated project for a 1-week training class) ... Oh there are several.. related to IAG object files .. but those Library files are not "working projects" intended to serve as a Tutorial.. they are limited projects, ready to be configured with IAG Object files, and "your" programming ... So that you can write the programs you need "faster"... which is nice... but, no help here. Somewhere out there.. is a nice simple .smc2 project file where you get to control a simple motor from the HMI  ..Preferably using an NJ CPU and a NA HMI .. home the motor.. jog the motor and input a few "go-to" positions... sigh!..   Like you would do in a One or Two Day class...   This kind of thing should be already be available in the Sysmac Library ... Thanks much for listening..  sorry about the rant.  
  4. I am trying to learn the logic of a process at my new job. There are tag names that I can't make sense of because they end with _xva, _xvb, _xvu, _xvd, _xvo, _xvc, _zsm, _zsu, _zsc, _zso, _zsd and so on and so forth. I know they are associated with motion, but I need to make better sense of them. There are no descriptors. What do they mean and is there a resource available that I can reference?
  5. schneider somachine

    hello everyone,  Im new with schneider electic , ı m planing to work with Altivar 630 variable speed drivers and i want to control it with M241 plc in somachine . but when i want to configure in somachine i could not add the driver to my hardware. is there any document about it ? or does anybody control it like this ? 
  6. Temperature controling with module

    Hello to everybody! This time I need to make a program to control temperature ... Some help? I don't know how to use an analog module, I'm just starting to working with them. The PLC I have a FX3u-32MR/ES (Mitsubishi), and I have the modules; FX3u-4AD-ADP and FX3u-4AD-PT-ADP for temperature measurement. PLEASE HELP? Have a good day!
  7. i need a example code for position control of MR-J3-20A with QD75D4 as intelligence module. and i want to see the parameter if possible  
  8. Hi all I am setting up a batch tank system, I have 1 pump which can pump to six different tanks(via pneumatic actuated valves). This is my first go with a HMI, usually I would use a multiple position switch. Is it possible to make a six position selector switch with a HMI? I am using a AB Panel-View 800, has anyone done this before? Any help would be appreciated.
  9. EMS provides low cost analog sensors useful for PLC analog inputs. For example the $25 temperature sensor (+/- 2%) is a useful and inexpensive way to monitor for an over temperature condition in a panel cabinet. emssensors.com AC voltage and current transmitters can be a useful way to monitor motor performance. Even the sound level sensor can be a good way to generate an alarm condition for a bearing failure.
  10. We are replacing the Old hardware from PLC to new Control logix hardware. wondering Application of IEC-61508 and IEC-61511 compliance in this brown field project. Any Thoughts ??
  11. We have a Panelview Plus 600. One of our panels is labeled "Motor Control," in charge of turning on/off different pumps. The problem is while the system is running, clicking the on/off button will not turn any pump off. When the system is shut down, the pumps can be turned on and off but not when the system is running. I'm trying to shut off one pump without shutting the whole line down. Any help is appreciated. Thanks.
  12. We have a Panelview Plus 600. One of our panels is labeled "Motor Control," in charge of turning on/off different pumps. The problem is while the system is running, clicking the on/off button will not turn any pump off. When the system is shut down, the pumps can be turned on and off but not when the system is running. I'm trying to shut off one pump without shutting the whole line down. Any help is appreciated. Thanks.
  13. Elecrical Control Panel

    Which type of electrical panel is most reliable, give some idea about that ..?
  14. PCS7 with S7-410 for Dummies

    I just need to understand a little bit more about the PCS7 architecture, if someone could point me to a document or a video or something, or just give me a few sentences to break it down it would be greatly appreciated. The reason being, we have a quote that we are working on for a customer over seas and are being told to quote our equipment with an S7-410 PLC.  I am very unfamiliar with Siemens in general, but completely unfamiliar with the PCS7. Our equipment is typically if not almost always stand alone equipment that communicates discretely to the rest of the facility.  Our equipment is not part of a process line, but rather feeds the process line equipment what it needs to perform its operation. I have been led to believe that the S7-410 PLC must be part of a DCS, so it does not seem like the correct fit for our equipment.  I just want to confirm this and learn a little bit more so I can explain to our sales folks and ultimately the end user why it is the wrong option for us and our type of equipment.   Thank you!!! Heather  
  15. Hi Everyone, I have a PowerFlex 525, in Velocity Mode with a Encoder Card "25-ENC-1". We are controlling this drive via TCP/IP with a 1769-L32. Through the PLC if I try to toggle the Bit for "Pos Redefine" in A560 [Enh Control Word] it instantly turns back to 0. But through the Parameter List Editor I am able to toggle A560. For My function I need to have the drive in Velocity Mode, If I change the drive to Position Mode I am able to toggle "Pos Redefine"   Any Thoughts would be great      
  16. Hi guys, been using this site for a long time, it has come in handy alot. However I have recently taken on my first servo project, heres an overview of the project We have a filling machine that has a separate dosing system to the filler head. It used to keep the dosing in time by adjusting a 0-10v signal to an inverter to make sure that a flag makes a sensor in a set window. I have installed an encoder on the filling head and an mpl servo to the dosing. I have then used an MAPC instruction to follow the encoder, the cam is 0-360 and it follows a straight linear line. I have installed of this as a temporary set up on one of the filling machines (we have 2) and it is working perfectly. I have now installed this on the second machine as a permanent set up with a panelview plus 7, L71 cpu. However it is giving a very strange problem on first power up, the encoder is giving the exact same position as before it was powered down. however as soon as the MAPC executes the servo axis  faults, giving an overspeed fault. the servo doesnt even look like its attempting to move (however it is through a 10-1 gearbox). if i then home the encoder it then runs absolutely perfectly until it is powered down again. I am beginning to think it may be to do with the master lock and cam lock position, as the cycle stop position of the two machines are different. however I just cant seem to get my head around i the difference between them.   Hopefully that makes sense any help would be greatly appreciated Thanks Rhys   c1_dosing.ACD
  17. Hi, Is there any setup to manage alarms in one PLC from multiple CX-Supervisor runtimes running on different computers? If I get an alarm, it shows up on both runtimes. If I acknowledge from one runtime, I also want it to be gone from the list in the other runtimes.
  18. Hi All. i got a problem when accessing local reporting service website using microsoft web browser control at HMI. it showing only half of page. when i open the website from internet explorer at same server where i develope HMI, i got no issue. please your advice. thank you.
  19.   In this first picture is a numerical input with a monitor device D2058. In the whole GOT project this is the only device that saves the information inputed.   Then on que PLC sequence theres an instruction moving that device's value gotten from the GOT to the position module's buffer memory. My doubt comes when there's another device D10022Z9 getting the same value of D2058. In this case the Z9 index is always 0, I checked. In the whole PLC program this is the only part where the D10022Z9 appears, there is no instruction anywhere copying D2058 to D10022Z9 which is how I would think is the way it has the same data always. Am I missing something or how is this possible?  
  20. FC1 Two hand anti tie down

    Version 1.0.0

    130 downloads

    Logic takes two inputs (I0.0, I0.1), debounces each (T0, T1), looks for actuation during a timed period (T2), and provides validation (M20.0). This logic is not designed, nor intended, to replace the use of any OSHA required two-hand safety control relay. It is provided for the sole purpose of it's educational value.
  21. FC1 Two hand anti tie down View File Logic takes two inputs (I0.0, I0.1), debounces each (T0, T1), looks for actuation during a timed period (T2), and provides validation (M20.0). This logic is not designed, nor intended, to replace the use of any OSHA required two-hand safety control relay. It is provided for the sole purpose of it's educational value. Submitter pop29684 Submitted 03/22/16 Category PLC Sample Code
  22. I need to learn about position control for 2 axis with a QD75MH2 module. I know how the basics about programming with the Q Series PLC but I've never done any positioning control. I'm having a really hard time understanding the program I have to modify and I don't know where to start. Is there any course you might recommend? Even if I have to pay for it. Thanks.
  23. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  24. C200HW-MC402.pdf View File C200HW-MC402-E Motion Control Unit Operation Manual Produced June 2001 Submitter IO_Rack Submitted 03/09/16 Category Manuals