Search the Community
Showing results for tags 'polling'.
Found 2 results
AB MicroLogix 1200/1400 to GE MDS 9710/9810 Radio Communication
xunilbama posted a topic in Allen Bradley / Rockwell AutomationGood Morning, My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. 10.181.3.104 is lift station 104, 10.181.3.105 is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ?
IFIX Scada communication issues
krysmberg posted a topic in GEI am new to ifix, I am having an issue, I am unable to receive any information, after attempting to fix the fact that the view was only pulling half the data I lost it all, I had a back up saved, but it didn't work on restoring communication, I was getting a cannot connect to node error, but I have fixed that, now all I am getting is question marks. essentially I believe that I have two standalone computers with the ifix software and the communicate directly with various plcs that share information across, either a ring topology or full connected. so the computer I have that is working is setup with scada and the database and MB1 with no network support, the one that is not working is set up the same, my cable connection is a usb to Ethernet and im communicating with a Comm port on the computer. I've tried different comm ports, even contacted GE, they were suppose to have someone call me back but no one has yet. Can anyone give me an idea of what I've got wrong here?