Search the Community

Showing results for tags 'plz help to stop/run my function by clicking button'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 77 results

  1. SIMATIC S7-300 training kit not working. PLC doesn't go to RUN mode, and still in STOP mode all the time. STOP mode led is blinking every 1 second, even when I press MRES key. This is a video I recorded for issue demonstration: https://www.youtube.com/shorts/ISMPH_zNuG4
  2. Hi,  I write a CAM function to sync 2 axis (Rotary & linear). i am using a virtual servo as master, and 2 physical servos as slave. The problem i facing is, with the exact same CAM profile setting, when difference speed used will give difference result of movement. Below is my setting, Master axis     linear motor move 0-180degree   0-500mm 180-360          500-0   when running with slow speed, it move following the CAM profile setting, however, when moving in fast speed, the linear motor will only move halfway then start to moving back 0 already. Has anyone encounter this issue before? is it i missed out some setting? Thanks.
  3. Hi All, I need access to a the Safety function blocks within a safety CPU using sysmac studio on a machine we are upgrading.. Is there a generic password available to gain access? Best Regards, Paul  
  4. Hello Guys! I have a problem what I can't really solve. In factory talk view (10.0) I wanna use a momentary push button. When I start the project, and I click on it nothing happening, the button activate only when I release it. Its like there is an OSF instruction inside.  I want the button activate until I push. May I use a wrong button ? Could you guy please help me with this? Thanks ahead.
  5. Hello, In GX Works2, what do asterisks before function block input and output variable names mean? Thanks,    
  6. i just got my NX1p2-1140DT controller with a R88D-KN04-ECT. i conneted every thing and directy got the 87 message on the display. i found out dat is becous wrong wiring I dont have the I/o cable incallt with omron they where saying that i don't need it and i can controll the motor controller full via ethercat. i already try to change to pdo mapping. what am i doing wrong? can someone help me? is it indeed true i dont need the i/o cable  thanks in advance for helping.
  7. Version 1.0.0

    40 downloads

    PRNG algorithm packed into a functional block. As an example of using ST language for Omron CJ series PLC.
  8. Function block RANDOMIZE on ST View File PRNG algorithm packed into a functional block. As an example of using ST language for Omron CJ series PLC. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  9. Version 1.0.0

    29 downloads

    An example on ST is the definition of the fronts of a discrete signal.
  10. Function block on ST for algorithm DIFU DIFD View File An example on ST is the definition of the fronts of a discrete signal. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  11. valve_control

    Version 1.0.0

    49 downloads

    A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization.
  12. valve_control View File A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  13. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  14. Hi, I have quite a noobie question. I want to create a function block to do some simple operations on 2 variables. Both variables are In/Outs (see picture attached). How can I make this function accept variables regardless of the data type? Given these is just simple math I am able to use the same instructions in REAL, INT, UINT, etc. But, the function block only lets me assign one Data Type to the In/Out variables.
  15. Hi all, I have an application where two buttons are created: End Batch: "Momentary Push Button" that modifies the value of a tag. Print Report: "Display Print Button" that generates PDF with a screenshot of the current screen. I would like to mix both buttons into one single button that does this functionality at once. I have been reviewing forums and it seems that the only way to do that would be by using VBA code but I believe that this is not available on FactoryTalk View ME but only on SE. Would anyone know a way of printing a PDF screenshot + modifying a tag at the same time and with a single button on FactoryTalk View ME? Thank you!
  16. Delta isp fb

    Does anyone have some delta isp function blocks they can share with me please
  17. hello Every one,    I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand.  I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000.    Can any one suggest me best way to do.  Thank you   attached file is for what I did in setting and program for the communication.      
  18. Reset button with structured text

    Hi! Pls program: When you bush the safty button on/off.  You must bush the reset button to make the pls-program function again.  Q: How do I program the reset button in structured text (cx-programmer) ?        
  19. Hi there, I am fairly new to programming serial communications, especially with Mitsubishi PLCs. Can someone walk me through in ladder logic how to bring in ASCII to the PLC, store the data in the data registers. Then send the data out to another PC once an 'X' input is satisfied? ASCII code would go like the following: C2,0,1,123,2,ABC,3,456,CR
  20. Hello everybody, i have some uncertainties going through my head. i am fairly new in PLC word, graduated last year, last 12 month i did project on Siemens PLCs, but now i have to expand my view with Mitsubishi. 1. i am working on project with several conveyors. for each conveyor type i have FB fairly similar to my FB in siemens. For all conveyor i am using same sdt containing 32 bits. So a have array[0..20]  of said sdt. But in fb i was not able to copy item from array, through input var containing index of that item to vocal variable, which i wanted to write back to the array at the end of fb. I tried different approach ->  using item from array *** input/output.  When monitoring item from array i can see, that variables i change in got2000 panel are in fact changing. But when i monitor fb itself, those same variables are not changing. i reworked this fb several times, for example when i found out that FB variables FB FXcpu cannot be set as retain so i would like to use it and i see no other way than make this fb work. :D 2. Is there possibility to us FB in another FB? I remember that i read some restriction about this, but now, i cannot find it. Thank you everybody for your responses    
  21. Hello from korea :)   actually i am new to company which i do freelancer job and i am not used to dealing machine with sysmac studio its hard to make things perfect...   its just simple thing move servo motor.. you can check my situation more closer if u see the picture that i uploaded   i think control servo motor By function named MC_MoveAbsolute4(Axis,execute, parameters......) i just use that function by put them in while loop so that i can check the move of motor but nothing happen lol   What can i do!
  22. RSLogix5000 Transfer function Bumpless transfer between two inputs. If criteria or FLAG is true, then transfer from input-1 to input-2 at a prescribed ramp rate, and then release the output to match the selected input without rate restrictions.  Issue: The issue is that upon the status of particular input (FLAG), the control valve demand jumps from 0 to whatever the output of the PID’s Low Select value is (maybe 50% or 80% or other). Request: Ideally, I would like to mimic or replicate the Transfer algorithms provided in other control systems, as described below . The TRANSFER algorithm performs a transfer between the two inputs.  The output is equal to the IN2 input if the digital input FLAG is TRUE, and the IN1 input if the digital input FLAG is FALSE.  The algorithm automatically performs a bumpless transfer between the track input and the selected input when a tracking request is removed.  The algorithm ramps to the selected input (IN1 or IN2) at the specified track ramp rate (TRR1 or TRR2).  Internal tracking may be selected to allow a bumpless transfer between IN1 and the IN2 inputs.  Individual track ramp rates may be initialized to ramp from the IN1 to the IN2 and from the IN2 to the IN1. Attached is RSLogix5000 program "transfer.acd" Thanks.
  23. Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
  24. Hello, I am new to automation and I do a project with a Micro850 Plc. I am more comfortable with logic block so I write my program in Function Block langage on Connected Component Workbench software version 12. I would like to make flashing a light but I don't know wich block to use and how to program it ... Could you help me. Thank you
  25. Hello, In past i was using Siemens S7 300 and Simatic 5.3. So a long time ago. I restart look back to plc because i need to monitor the temperature of my heating system. So bought a plc that is a IEC61131-3 standard and  OpenPCS as Develop software.  So i begin to play with OpenPCS because  Im very rusty.  SO i create a function, that i named FC_TEST . When i compile the below code i get an error E: S5004: Function blocks instances are invalid in 'FUNCTION'-POUs, STRUCTs, and in ARRAYs.  It seams that Timer block inside the function FC_TEST are not allowed, i understood right ? (*  --------- DECLARATION  ---------  *) VAR_INPUT T_1 : TIME ; (*Declare T_1 as a Time Input ==> Set the Time of Timer *) START : BOOL; (*Declare START ad BOOL Input ==> Start The Time of the TIMER *) END_VAR VAR MY_TON : TON; (*Instantiate MY_TON as Timer type TON*)  END_VAR (*  --------- FC PROGRAM  ---------  *) MY_TON(IN := START , PT := T_1 ); FC_TEST := MY_TON.Q;   (*  --------- CALL THE FC---------  *) tmp2 := FC_TEST(T#2s, I0_0);  (* I0_0 is a input*) Thanks  Marco