Search the Community

Showing results for tags 'plc software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 78 results

  1. GX Works 3

    Hi everybody! Recently I've got problem with installation of GXW3 on my PC There is a message "Any of the MELSOFT products or other software may not be installed normally. Please restart computer before installing this product" during installation. Of course I restarted PC)), delete all Melsoft products from my PC,  please i need your Help here ver 2.7 IQWORKS  I have Windows 10 64bit .  
  2. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  3. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  4. Omron NB Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  5. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  6. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  7. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  8. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  9. Codesys

    Hello - I stumbled across some mention of Codesys and was curious if anyone here uses it. Pros/cons? prefer it over other programming software. Have it downloading currently (since you can download a free variation of the application) but it looks quite interesting. Also - what PLC hardware is programmed with it? Did not see that mentioned on their website when I was browsing through.
  10. Dear friends.. I want HMI panel view 300 software.. Is this available in net or free of cost in web sites
  11. Hi Dears, I have 2 No. CPU 315-2PN/DP (6ES7 315-2EH14-0AB0) I want to use this CPUs for S7 300 Software Redundancy. I Have 2 CP342-5 too for IMs. I want to use profibus port of this CPU for synchronization. if this CPUs are suitable for software redundancy? or I can not use this CPU and I must to use CPU-315-2DP instead?   Thanks
  12. Zm-71se

    Is there anyone, have this software? Coukd you help me
  13. Software for A0J2

    hi  everyone  I have a old Mitsubishi CPU ( A0J2CPU). I want  make backup from this CPU.but I cann't Connecting with Gx developer v8.72 what is software for this CPU-series? Please help me . i need to this Software
  14. I have a 1996 Howa Vertical Machining Center running on a Mitsubishi M520AM control. 3 Axis with Jig Changer on the main control. ATC and 16-tool magazine on 2 each Model E/FCUA single-axis amplifier/controls with a DIO extension interface to main control . I lost parameters and User PLC program to the 2 Model E amplifier/controllers at  ATC and the Magazine servos. Dead batteries, and both units are back to defaults. Main Control and Operation Panel work. I can read the ladder and write to CPU ladder from the operator panel, and I have a paper copy of the main ladder and parameters. I have a working FCUA-CT200 pendant to communicate with the 2 Model E controls, but no way to program a new user ladder and upload it to the Model-E's. Anyone know where to find PLC software for 1996 vintage Mitsubishi CNC controls? I can probably make any kind of interface cable it would take to get from a PC to the control. the FCUA-CT200 teach pendant will let me enter parameters  via 'PLC I/F' but it won't let me program and read/write a User  PLC.
  15. PLC password crack - FATEK

    hello, can any body help me about plc password crack, I have an old FATEK PLC and i want to upload the program to my pc but i don't know the password. please any one here.   Much appreciated if you can help me.Thanks 
  16. Hi All I need software for ALU201L, it is an old Schneider plc Thanks
  17. Mitsubishi

    i want mitsubishi plc programming software gt works 2 basic version
  18. Hi. I need to troubleshoot a Modicon TSX Momentum 170ISP00100 Weighing Module. This hardware was discontinued by Modicon a few years ago. Does anybody have the configuration/runtime software for this module? Any help would be appreciated. Thanks in advance
  19. Anyone possibly have software for the Mitsubishi Positioning module AD71 (SW0IX-AD71PE) ? It's a servo positioning module for A Series PLCs that can either be programmed by an old programming terminal or a DOS based program for PC. I think SW1IVD-AD71P could also workReally hoping to find the any compatible software for this controller. Maybe someone has leads?
  20. Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
  21. password unlock tool

     hi everyone i m traying to   write to plc  a program and getting this message then program is not downloading to plc   'there is a device in the program (main) that is outside of the range  check the program and currect the device that outside of the  range ' I m using mitsubishi fx3ga-60mt  plc. please suggest me about it .                              thank you     hello everyone please let me know about  how to make software  tool for password read from Mitsubishi,delta, omron, siemens plc .                             thank you       
  22. Messung PLC

    Dear Friends, I want Dox mini software for messung plc, i had search in messung dealers in various place, but not available. <edited> Thanks  Boominathan.K
  23. Hello Friends,This video guide you about the programming of Schneider Altivar 312 VFD using SoMove software. From this video you can learn about1. Using SoMove software to program the Altivar 312 series VFD.2. To control the induction motor using control terminals of ATV312.3. To control the induction motor using the SoMove software control panel.4. To monitor the status of motor speed and thermal state on SoMove software.5. To export the graph of parameters recorded using SoMove software.https://www.youtube.com/watch?v=GgUKymi3uwAPlease support my channel by LIKE and SUBSCRIBE to continue these tutorial.ThanksSana ur Rahman
  24. MAM-KY02S

     kindly i need the plc software programmer for plc MAM-KY02S  and the cable connection data