Search the Community

Showing results for tags 'plc editor and simulator'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 30 results

  1. Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!  
  2. Gx Simulator3 and TCP modbus

    Hi, I'm new to the Mitsubishi world, so may be anyone help me in a quick! I need to test a my client with the Mitsubishi MODBUS tcp.  To do this I would like to avoid use a real plc and use  the Gx Simulator3 that come with the Gx Works3. The question is: the Gx Simulator3 is capable to simulate a MODBUS tcp module? To be more specific I tried this: - created a project in  Gx Works3 with a FX5U CPU. - configured the FX5U built-in ethernet module with IP address of the hosting pc (also tried 127.0.0.1 with no success). - activated and configured the MODBUS muster to the built-in ethernet module. - wrote a trivial ladder program with a 1 input and 1 coil. I can download and run the project on the Gx Simulator3 but I cannot connect to tcp port 502 that I supposed opened by the MODBUS muster functionality of the build-in ethernet module. Do anyone know if the Gx Simulator is able to simulate modbus tcp functionality?   Thanks in Advance Luciano.       
  3. Hello. I start learn GXW3  and i have problem with simulation. I trying to connect GT Simulator with GX simulator 3, but it's doesn't work. GT Simulator 3 easy connecting with GX Simulator and GX Simulator 2 and it's working. So i can't say that problem in GT Simulator 3, but GX Simulator 3 works too, when i starting it. All software configurated without any errors (IQW,GTW3,GXW3). I using GX Works3 1.026C, GT Designer3 1.151H, IQ works (melsoft navigator) 2.12N.   All time when trying to connect, popups this msg. Settings of GTS3 Note from HELP. Does someone know how fix this problem?  
  4. Real world simulator

    When we simulate a plc program we have to manually input the changes in input(like magnetic reed switch) For example when a cylinder goes from up to down reed turn OFF and reed down turns ON Is there any program available where we can define such things that will turn on and off during the process automatically.
  5. KINCO PLC as MODBUS RTU slave

    Hello to everyone. I hope you are doing well. I'm trying to establish a communication between my PC and my KINCO PLC. The manual states it supports MODBUS RTU protocol, so I downloaded two different Modbus Master simulator I found out: Multiway from OMRON and qModMaster. None of them seem to work properly. I attached some pictures of the messages I get. https://ibb.co/f1mCSNt Multiway message https://ibb.co/bP5cX1t qModMaster message I include the configuration of the communication parameters. https://ibb.co/nMty8D9 PLC parameters https://ibb.co/6RTqVfC Multiway parameters https://ibb.co/N1XTccd qModMaster parameters According to the manual, in order to play the role of Modbus master with the PLC it's necessary to configure some instruction blocks (I'm programming in ladder). However, I could not find any block to configure as Modbus slave. I don't know what else I can do. I'm in trouble with this task. Am I making some mistake? Thanks for your attention.  Kind regards!
  6. Hi. When i run the plc in the simulator, only certain stuff seems to work, most logic seems to work. Timers seems to refuse to start at all, the sim is in RUN mode using Sysmac 1.45 Standard edition.
  7. Hi Everyone, I am creating some IAG's in Sysmac Studio for an NA Series HMI. I have found that I can do an NA Simulation in the IAG program (it just brings up the HMI simulator screen, with the IAG in the top left corner). This has been useful for ensuring I have the correct size/scale of buttons and text etc for the HMI I will be using. I have also been trying to use the watch tab to put some dummy data into the simulated IAG, primarily to ensure that custom text formats etc are working properly. However when I change the value of variables in the watch tab, nothing changes on the simulator screen. The variables are all members of a structure, and datatypes used include Boolean, Single, and String. Is this normal behaviour for IAG simulations? Basically, I was trying to test all my formatting etc before I publish the collection (there will be about a dozen IAG's in this collection once it is complete). If there is another way to do this, then I am open to ideas. Worst case I can just publish the collection, import it into the HMI program, do a heap of simulations and then go back to fix any issues with the IAG's before republishing them again. I would post a couple of screenshots, but the website isn't letting me upload anything   
  8. Hi  I want to simulate my program with ccw free version downloded, but i always have this message: The Ethernet Ip port (44818)  is not available because it is already allocated by: RsLinxNG. Did someone have a solution please?.
  9. Simulate Omron FINS PLC server

    Hi, I am new in working with Omron PLC. I would like to know if there is a way to simulate an OMRON FINS SERVER to test a desktop application for simple command like READ_MEMORY_AREA, READ_CLOCK... I try to use CX-simulator but i'dont know how to connect it to my application. Thank you for your advice.
  10. PLC TCP/IP simulator

    Hello. I'm developing NS5 HMI visualization. The display is using TCP/IP comunication.  (IP: 192.168.1.21) communicating with PLC (IP: 192.168.1.20 - my PC) I would like to start PLC (CJ2M) simulator on my PC (IP: 192.168.1.20) so that HMI would comunicate with my PS (PLC Slave simulator) Does the simulator exists? Thanks. BR, Andrej.
  11. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  12. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!
  13. CX-Supervisor 3.4.1

    Hi After updating CXS to ver. 3.4.1 I can't see point address I can see them when I editing but in the list form only the array len. is shown. When I enter a new point I can see the address. Anybody now hove to solve that ? Banker
  14. I have recently come across a free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.PLC Fiddle is currently in an early stage of development but is functional enough to be helpful to you in learning and understanding PLC concepts.  http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/ YouTube Video: https://youtu.be/G43ZLOwu2dM www.plcfiddle.com Let me know what you think of this for a learning tool. Thanks, Garry
  15. CX-Simulator

    Hi guys, Do you have experience or know any good guides to set up a simulation case like this: - Simulating a PLC program such that the "PLC" is accessible on the Ethernet (for example just locally). - In addition, setting up the PLC settings with FINS protocol such that it is possible to write to the PLC with FINS protocol from another device. The first part is  most important. Best regards PC_VS_PLC
  16. What can be this failure

      What can be this failure ?  I download gx works 3 and leave it in run, then simulate ihm the fault appears, I've reinstalled the gt designer.
  17.   A new free Modbus RTU/TCP slave simulator tool - Unslave - has been released. It is focused on simplicity, usability and ease of setup. Instead of a GUI it supports flexible JSON-based configuration, where you setup slaves like this: "slaves": {     "1": {         "isOnline": true,         "registers": {             "HR0": 1,             "HR10": "0x0A",             "C0": true,             "C999": {exception: 3}         }     } } This type of configuration has great benefits - you can easily switch between different setups by specifying a different configuration file: unslave.exe newConfig.json You can put the configuration under source control and track changes. Unslave lets you configure any number of slaves, setup values of every Modbus register, setup Modbus exceptions. In addition, Unslave displays and write to a file the logs of all communications on the link. This is very useful for debugging: 2017/06/06 17:21:54.310 - TRACE: Byte received: 1. Total: 1 2017/06/06 17:21:54.310 - TRACE: Byte received: 3. Total: 2 2017/06/06 17:21:54.310 - TRACE: Byte received: 0. Total: 3 2017/06/06 17:21:54.326 - TRACE: Byte received: 60. Total: 4 2017/06/06 17:21:54.326 - TRACE: Byte received: 0. Total: 5 2017/06/06 17:21:54.326 - TRACE: Byte received: 1. Total: 6 2017/06/06 17:21:54.342 - TRACE: Byte received: 68. Total: 7 2017/06/06 17:21:54.358 - TRACE: Byte received: 6. Total: 8 2017/06/06 17:21:54.363 - INFO: Modbus frame received: [1 3 0 60 0 1 68 6] 2017/06/06 17:21:54.363 - INFO: Reading value: 1HR60 = 14119 2017/06/06 17:21:54.363 - INFO: Modbus frame sent: [1 3 2 55 39 238 110] Updated Sep 17, 2017: Since version 3.0 it's possible to update slave configuration at runtime via an HTTP API, for example: PUT http://localhost:9000/slaves/1/registers/HR0 content-type: application/json { "value": 1234 }  
  18. Hello All,   I really need help with a full version software of DM value editor for Keyence PLC. All the ones I have found dont seem to work or might be virus.... All help will be really appriciated! Thanks
  19. FinsGateway

    I need to connect cx-simulator to Exor JMobile runtime, this runtime have ETH fins protocol to communicate with Omron PLCs. And with real PLC it's works. But I need to test programms with cx-simulator. And here I have problem. Googling and reading cx-simulator's documentation said me, that I need FinsGateway application. But it's old software. And Omron said that new is cx-compolet. But I can't find nor Finsgateway nor Cx-compolet. Does anyone have this programms? Or mayby knows how to connect cx-simulator with my Runtime. 
  20. I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  
  21. I am using PG5 v2.1.310 and Web Editor 8. I am trying to implement user access on my project. I have created a login page, made it as the default page, put the logon component on the page and also added a user to the project. The page loads without any issues, but nothing happens when I enter the username and password. I read the help, and I don't think I have missed anything. Any ideas? Thanks, Csongor
  22. see my videos link download DEMO below video
  23. Expressions

    Hi forum members!   I am spinning the wheels on trying to get my expression to validate.  I am new to expressions so after trying for a bit I have thrown in the towel and am looking to the experts here to help me out. As you can see with attachment I am trying to change the color of the valve top hat.  I am needing 3 colors: Gray when closed, Green when open and in Auto, and Yellow when open and in Manual. I was asked to not change the PLC logic as this could be done from the SCADA level.. After looking at my application and attempt do you have any suggestions on what I am doing wrong?    My Expression:  If {::[Process]Program:Boilers_Main.LV_36101_New} < 3  Then 0  Else  If {::[Process]Program:Boilers_Main.LV_36101_New} >= 3  AND {[Process]LIC_36101A_PIDE.Auto}  Then 1  Else  Then  If {[Process]LIC_36101A_PIDE.manual}  Then 2
  24. cx simulator

    Hi all  still new to this . i have no idea how to make the simulator work ,it is all grayed out on the screen . if you run the cx simulator and get the virtual plc how do you run the program i  have checked on you tube  nothing there  any ideas will be help. currently i have  a plc connected, but need to use the virtual plc for the  other ones due to not having comms leads and usb to serial add 
  25. From what I can tell, there is no built-in PLC simulator within RS Logix 5000, and I have to download a separate package that requires another licence to be paid for?   Is that really the case??