Search the Community

Showing results for tags 'plc backup tool'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 33 results

  1. seımens

    hello everybody ı have machıne wıth sımatıc s7-1500 wıth tp1200 comfort how can ı upload program from hmı tp 1200 comfort to my laptop wıth tıaportal v17 ı dıd backup and tempt fıle but ı dont no haw can open fıle
  2. Hi all, I'm new to Allen Bradley but have some experience with TIA/STEP 7 - not that it relates to this issue! We have 2 side by side systems but running a SLC 5/05 CPU, with the same program but different IP addresses, connected via a network switch. All has been fine until both were power cycled - system 1 CPU program has dropped but not system 2? The IP address for system 1 has been reset and can't be pinged from either the switch (but 2 can) or directly connected to the PLC port. Steps I have carried out as below, so would appreciate anyone skimming over and pointing out where I've gone wrong/something else to try; - Used BOOT P DHCP tool directly connected to system 1 plc, add relation assign original IP address, click Disable BOOT P. - Attempt to ping (after changing laptop IP to same loop but different node) = no connection - same cable used to connect to switch and ping system 2 which worked so cable and adaptor settings good. -not going to help with the immediate problem but battery swapped out for new on CPU. Any assistance and advice appreciated!
  3. I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
  4. I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
  5. NT Support Tool Ver 4.87

    Hi guys, I need to upload an NT31-123B-EV3 IHM (System Ver 4.2), but the software I have installed is NT Support Tool Ver 4.87, does not include the PT model I need (System Ver 4.2), has only NT31-V2 / V3 (System Ver 3.1 / 4.1). Does anyone have a solution to this problem? obs: * HMI:         NT31-ST123B-EV3 (System Ver. 4.2)         * Software: NT Support Tool Ver 4.87 Best Regards,
  6. NT Support Tool 4.87E

    Version 4.87

    662 downloads

    NT Support Tool 4.87E The registry fix included needs to be manually executed and will add Omron PT models with system versions 3.2/4.2
  7. [Omron] - NT Support Tool 4.87E

    NT Support Tool 4.87E View File NT Support Tool 4.87E The registry fix included needs to be manually executed and will add Omron PT models with system versions 3.2/4.2 Submitter photovoltaic Submitted 10/14/22 Category Omron
  8. Dear Experts I have Compact Logix L33ER processor for Hot Backup Redundancy Purpose in WTP application. Iam using Flexlogix 1794-OB16 DO outputs. Flex adapter for IO communication. Iam trying for Soft Redundancy from main processor to peer and peer to main processor . During Switchover from Main to Peer and Peer to main Processor, the DOs are cut off. While in the middle of the process if the Switchover of PLC happens due to failure of Main or Peer PLC, if the DOs are cut off, Should i Start the process sequence logic from beginning? I tried configuring the DO properties of  Communication Fail Behavior in output modules properties as "Hold Last Output but still the DOS are cut off during switchover. Then also Iam facing the problem of DO cutoff whle switchover. Iam having same program and IO configuration in main and peer plc generated through HotBackup tool. Please let me know if there is any way to Prevent DO cutoff while switchover . Also in Panelview HMI iam using 2 screens for Main and Peer PLC. While switchover the screens in HMI are showing in boxes. Please advise. Regards Krithik.K
  9. NT21 to CP1L-EM

    I am trying to get a NT 21 to link to a CPL1 I have both set to Host link 9600/7e2 I have it set to read a DM All I get is system initialzing I am using the same cable i used to build the screens with NT Series Support tool I sent and recieved the screens so the cable works The com port on thee PLC is flashing I have tried starting the PLC in run mode and Monitor Mode What did i forget to do ??????? Rob  
  10. password unlock tool

     hi everyone i m traying to   write to plc  a program and getting this message then program is not downloading to plc   'there is a device in the program (main) that is outside of the range  check the program and currect the device that outside of the  range ' I m using mitsubishi fx3ga-60mt  plc. please suggest me about it .                              thank you     hello everyone please let me know about  how to make software  tool for password read from Mitsubishi,delta, omron, siemens plc .                             thank you       
  11. Dear PLC forum. I have an issue with a customer who has bought some equipment with CQM1H-CPU61 installed. In order to program certain changes the device requires the password. Both I and the customer have contacted Omron but the only solution from their side was to buy a new system. As I have managed to find via googling the password can be recovered with Plc Backup Tools V6.0 software.  Does anyone have the installer for this software and are they willing to share it with me? Thanks in advance.
  12. Hi Everyone, I've had V32 installed for at least a year but haven't had much need for it until this month. I installed a new activation on Friday that I thought crashed V32, which was weird because all the other Studio versions were working. Any time I tried to open an existing project or even create a new one, I would get an "access violation was generated" fatal error. I reached out to a colleague who found a tech note on the problem. Turns out the activation had nothing to do with the crash but rather, turning on the bookmark tool bar caused it. If you have the bookmarks toolbar turned on in version 32  the Windows desktop needs to be set at 100% magnification, not 125% which is the Windows default. Right clicking on the desktop, picking display settings and changing the scale and layout to 100%, then rebooting the computer fixed it. But now all the Windows icons are really small. I've been spending most of my time in V21 through V28 until recently. Since we're all likely going to be seeing more V32 in the near future, I'd thought I'd pass this on.  
  13. Hi Everyone,   I have  NT31C-ST142-V2 and it has a prompt of "System Program not exist or incorrect." I am trying to transfer via NT Series System Installer but I am getting a time-out error. I have Xm2S-09 serial cable with ATEN serial-to-USB cable.I know it is not broken since I can still Upload/download on a CJ2 PLC. I just want to know what other things I can do upload a systemprogram. I have seen a comment on this site that he remove the battery then tried to upload again.   NT is almost 15 years old. I have a back-up program.   I can't seem to upload by this time for pictures of theH MI and the screenshots of software .
  14. Conversion from A to Q

    Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download. So I am stuck now. Can anyone help point me in the right directon? Any Help greatly appreceiated. Thanks in advance.    
  15. hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
  16. Geo1000

    Hello all, I have a problem with PLC at work. I am working on historical code with a view to upgrading it for a roll out program to all site based PLCs. The code is to be downloaded using memory cassettes, and there is data on the PLC's which needs to be retained. I have re-worked the code and it performs as I would expect as per the following: 1) I download original code (V2.01) to PLC using CX1 2) The PLC simulates a cycle and various values are stored (the key variables are Installation Date and Service Due date). 3) I then download my code to the PLC and the variables have been retained. All so good so far.   The problem is that the factory production line uses PLC code saved using the PLC Backup Tool. When I download the original code to the PLC using this tool, I encounter various issues, but the main one is to do with real time PLC clock values. When I download the code direct from CX one developer,  I use the MOVD(083) instruction on A352 through four to give me a variable with the date, month and year. This morning (29/01/2019) the BCD values read as 41, 1 and 25, which translates to 29 (0010 1001), 1 and 19 (0001 1001). When I download the backed up code using the PLC  Backup tool, the values are totally different. I have run the backup files for both codes through a comparison program and there are no differences between them at all....... Can any one advise if they have experienced this before??   Thanks.
  17. First time using Connected Components Workbench and am modifying an existing program,  does anyone know why and how the original IO_EM_DI_ numbers have been changed and not just the alias'. When I right click and select properties for each tag it gives the address and says 'Read only cell' generated by the I/O wiring tool indicating the I/O channel to which the variable is wired' Any help would be great thanks!
  18. MAC E300 backup

    Hi everybody! I should help to upgrade some automation equipment, that has a FX2n and MAC E300 onboard. I.e. all SPS are quite old, obsolete and discontinued in production for a long. So will be useful to make an uploading of program from the HMI, otherwise, when it may die, all autmomation system will  die... However, in contrast to the PLC program, the program in HMI is password protected for upload and download. Excuse for my question, but is there a way to bypass this password without losing an HMI program. Thanks in advance
  19. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  20. What is the best way to get to the configure screen when the mer file is set to auto run on the hmi. I need to get this file out before this screen finally quits on me. 
  21. A machine was bought at auction which included PLC-5/15 module.  It did not come with a backup of the program.  Our maintenance technician said the program would not load and turned the module over to me (IT).  I notice the battery was installed in '92 so am assuming the program is lost.  Is their any internal memory or last ditch effort i can attempt to recover the program from this module?
  22. iFIX restore problem

    Hi, I have .fbk backup file of iFix aplication (i mean).. When I try to restore it by "Backup&Restore Wizard" in part where I "Browse" the way to Backup file and click on "Next" is problem. Pop-up window show -> "Bad file format. The archive file may be an old version or a wrong version in header signature or is not a Proficy iFIX full backup file (.fbk)" ....  My question is = Is possible to find what of version is my backup file ??? when i suppose this error mean i have installed wrong version of iFIX sofware (my version is iFIX 5.5).. Or is no problem of my iFIX version ?  Thanks
  23. I have a coworker who swears up and down that he once came across a bit of software that would allow one to mount the cf card of an Allen-Bradley plc on a windows computer while it was still in place in the plc, or at least access the contents of the card. Has anyone ever come across this unicorn?
  24. Omron Support tool

    Good day, I am trying to upload a programme to a Omron NT600S HMI, can anyone advise or help me with the right support tool software that I need. Thank you