Search the Community

Showing results for tags 'panel view 1000'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 110 results

  1. Hello I would like to first let everyone know I am new to the world of troubleshooting or programming plc's . What we have is a SLC500 system that is connected to a Panelview 1000 HMI via the DH+ network. The issue we have is the panelview displays a gate that is suppose to be closed at as gate fault. When i connect to the plc the ladder rung shows that the gate is closed. To show various positions of the gate the programmer used N13:70 as gate opened and N13:71 as gate faulted and N13:72 as gate closed. When i checked the logic it showed the bit N13:72 as engaged or true if you will. This logic is in the ladder rung that is labeled PV Status which i take is the status the HMI reads so my question is why does it show GF when it should be reading GC. Ive searched all through the logic and it doesnt appear to be wrong here is the logic the best I can simulate it  ladder 6 rung  53  instruction is  XIC O:13.0/11 and OTE N13:76/0 (Gate Open ) and the branch is XIC I:5.0/11and OTE N13:76/1 (Gate Fault) next branch is XIC N13:3/11 and OTE N13:76/2 (Gate Closed which this section is green or highlighted or true which ever you like) when i looked at the input XIC N13:3/11 this is what I found is that this XIC is on ladder four rung10 and has the following XIC T4:154/DN and branchoff that is XIC I:5.0/11(gate opened)XIC I:6.0/11(gate closed) which these two inputs are false or not lighted the output is OTL N13:3/11 and it is true which makes the previous rung true showing the gate closed. So why is the panelview showing the wrong position. I even went as far as resetting the HMI and the PLC so if anyone has a helpful hint I would greatly appreciate it.
  2.   Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  3. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.

  4. GT 2000 down convert to GT 1000?

    WattUp posted a topic in Mitsubishi

    Does anyone know a way to convert GOT 2000 screens to a GOT 1000? 
  5. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.

  6. Deif AGI400

    Bryll posted a topic in HMI & SCADA

    Hello, Is there anyone here that use or have used the AGI400 series of HMI from Deif ? Would like some input before I buy one for testing. Price seems quite ok, and the design isn't the ugliest one either. Pros and cons please !!

  7. Cable pin configuration required.

    rupesh naik posted a topic in GE

    Required cable PIN configuration for Nexgen 1000 series PLC, MS-40M-E, NT11-SF121B-EV1 , GT1020-LBD.  

  8. NEXGENIE 1000 Communication

    SAJU posted a topic in Mitsubishi

    Dear all, i have using nexgenie 1000 cpu for my new project. but i am not able to connect with codesys v2.3 . I have installed target file T1.4 and T2.4. trie with both. Now i have doubt with communication cable. I have used standard RS232 Cable with 5and 8 Pin short. Kindly suggest the correct one. Thanks in advance
  9. I'm looking for a cheap solution to have a little HMI display connected to a Control Logix PLC through Ethernet.  The HMI is for a remote offloading station and there is little to display or control as the hardwired controls are already in place. The display would be mostly to indicate if the offload pumps were inhibited or not and which alarms that affected the pumps were active.  My problem is that Rockwell discontinued their mini displays or will during this year (this is for an external application) and the HMI's available that are tiny seem to be "locked" into Compactlogix or the Micro800 series.  Any advice on brands that would do such a device?
  10. We have an auto-clave unit purchased at auction roughly 4 years ago.   CompactLogix L32e and PanelView Plus 1000.  All has been working for us until last week.  Suddenly, the program seems to freeze up after around 30 seconds.  I can still touch the panelview and the touches are registered, (the mouse icon moves) but the program does not respond and I can tell the program is frozen because the clock which displays seconds stops counting. When i boot into safe mode (clicking white box on boot) the system does not seem to freeze at all.  I am able to navigate those menus w/o issue.  We don't have any of the software to connect to the PLC.  I understand this is a somewhat broad issue, but does anyone have any idease where i can start in troubleshooting this? or is their any further info i can provide which would be helpful?
  11. Jawest is OEM/ODM for Industrial panel PC, industrial monitor. Our Rugged panel PC is specially designed for industrial needs. First-class design, rational construction and metal material panel, ensure solid and shock resistance. It’s widely used in military, electric power, industrial auto equipment, manufacturing and weather station etc.  More info visit http://www.szjawest.cn/index.php/products.html   Low Power Mini Embedded Box PC   •  Enclosed dust-proof,anti-corrosion,anti-vibration,Electromagnetic compatibility and high anti-interference ability. •  high reliability, continuous production,decreasing failure rate. •  The motherboard adopts unique design,(watchdog),remote wakening,automatic reset. •  Aluminum alloy materials, drawing process,heat dissipation. •  Fanless ,noiseless,Silent use is more reassuring. •  Working temperature:-20~65°,working by 365*24H with all-weather. •  Fast Network Connecting: Wireless & Wired Gigabit Lan. •  Support Industry Standard Software, compatible with Win7\8\10 and Linux. •  Expandeddisplay for Multi-task ; Electricity Boot. •  Graphics Processing Ability: Clearer Quality Image and full color. •  Strong sutable with surrounding(temperature/humidity)cold,hot,humid,outdoor,voltage instability.
  12. I got into a project were they have 20 panelviews plus 1500 around the building, and they want to be able to serrate the displays accessible by the users based on the physical location of the panelview, for example Room1 should not see room2 but can see room3, at this moment we have a complete application with all the screens that have been downloaded to all panelviews, in order to avoid maintain 20 different ME applications I would like to ask if any of you had this problem before or any ideas on how to go forward with it.   Thanks
  13. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  14. How to connect Micrologix 1000 With Weintek MT6070ip HMI? i Can't connect my Allen Bradley Micrologix 1000 With Weintek HMI...
  15. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard
  16. Is there a possiblity to retrive password from mer file? I wanted to restore mer to runtime with local directory and its asking me for password that i don't have.  Could some one help?  
  17. I'm making this thread, continuing from my previous one (Newbie Screwed Up) where I received tremendous help from those on this forum.    I now have the AB 5/04 working, but the Panel Mate 1700 doesn't seem to communicate with the 504.  The HMI connected to this brick is a Cutler Hammer Panel Mate Pro 1700.  It lights up,  the touch-screen buttons somewhat react to touching (might take a few strokes to react), but the functions do not react with the 5/04.  I called the equipment manufacturer, and they basically said it is all obsolete equipment, no longer supported, etc. and we are SOL. But, for a mere $100K, we can send the unit back, and they'll install all "modern" control units !! Not an option.   I get it that the unit is 10+ years old, but has very low cycle times on it.  (maybe 400 hrs)   It's my understanding that the  HMIs are just that....a means of the operators telling the PLC what you want it to do. So, my question .... is there an off the shelf software package that would emulate the Panel Mate 1700?  All I need to "control"  is to advance or retard two sets of heat seal rollers (via PacSci stepper motors), actuate two separate hole punch solenoids, and an air solenoid for a knife....it's basically a packaging machine.  I do have a program called PMConfig , but I don't see any communications buttons or icons in that software, just screen shots of what shows up on the HMI, icon selection, change fonts / colors, etc.  So, I'm looking for a resolution to make new(er) HMI (or even just a cheap a$$ laptop)  with affordable software, and easy interface to communicate with the now functioning 5/04.  Thanks for the input.
  18. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain

  19. Indirect Addressing NA Terminal

    Luis Miguel Garcia Hoo posted a topic in NJ Series / Sysmac Studio

    Hi. ¿Is there a way to use indirect addressing on a NA Panel?  I need to use a motor operation template for several motors and i think is not very smart doing the same panel over and over. I have always created a screen and then reused it (on FactoryTalk View, Intouch, Schneider Vijeo) The problem is that we don't find any article about indirect addressing on NA panels. So we dont know how to do it. On CXDesigner we used DM addressing so we could use a template instead of creating many button panels when we need to operate a motor, for example. Its like when you use indirect tags on Intouch or Parameter files on FTV. I fear that indirect Addressing is not possible, but in that case ¿Which method do you recommend? ¿Got an example or an article mentioning it? Thanks in advance.
  20. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached

  21. CVS file log not generated.

    Andrei Blagaila posted a topic in Mitsubishi

    Hi guys, Yesterday I posted a question about how to create a trigger for a log. Now I have the next problem. I created my log, loaded the Logging firmware on the GOT but the CVS file is not generated. Can someone tell me what i'm doing wrong? I am attaching all the settings and the PLC part of the program. I want the values of ZR1200 ZR1204 and ZR1205 every time they change. They are recipe values. I tried also putting a button to create the log file on the HMI. Did not work.  
  22. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.

  23. Ns panel backup file?

    Milosh posted a topic in CX-Designer

    Hi all. Is there any loction where I can see my backup file of panel project. I have situation that one of my host dissaper from list, no one tag is displayed in symbol list, only local tags stay?  
  24. Hello I have a panel view 550 communicating with a micrologix 1500 LRP works normally, I need to change some alarm messages in it, but when I try to upload to the PC I can not. I have no experience with panelview, I have a UIC 1747 and I can see the view panel via RSlinx AB_UIC-1 DH485 STA: 0 COM 5. But when I use panelbuilder 32 to upload only the error. Can anybody help me.
  25. We have a sterilizer w/ Allen Bradley controls which we bought at auction.  It has a panelview plus 1000.  It came with a CD containing .mer and .apa files.  I was able to load the .mer file via the configuration screen by using the external CF card.  When I run the application, their is a login button in the bottom right which when pushed brings up a user/password screen.  We do not know the user/password for this.  Is it possible to find the password by somehow reviewing the files.  We do not have any software, and do not want to make any changes to the program (rather than changing the password).  I've attached the files in case anyone can help. Also, was i correct to load the .mer file??  or should I be using the .apa?  I followed these instructions here. http://www.judiwa.com/2010/10/05/how-to-copy-panelview-plus-application-with-compact-flash-card/ Thanks for your time PA1525_PVP1000.mer PA1525_PVP1000.apa