Search the Community

Showing results for tags 'online training plc scada'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 169 results

  1. Version 1.1.15

    0 downloads

    LECPServer A high-performance industrial connectivity platform LECPServer(Leanboard Equipment Communication Proxy Server), It is a high-performance industrial connectivity platform developed based on the JLean framework. It solves communications challenges with industrial devices and applications, with streamlined data through a single communications platform, Over 90% of PLCs can interact with applications through LECPServer by HTTP POST (Webapi), Users can connect, manage, monitor, and control diverse automation devices and so
  2. View File LECPServer-Manual-doc-en LECPServer A high-performance industrial connectivity platform LECPServer(Leanboard Equipment Communication Proxy Server), It is a high-performance industrial connectivity platform developed based on the JLean framework. It solves communications challenges with industrial devices and applications, with streamlined data through a single communications platform, Over 90% of PLCs can interact with applications through LECPServer by HTTP POST (Webapi), Users can connect, manage, monitor, and control diverse automation devices and so Submitter xeden3 Submitted 12/03/22 Category Manuals, Tutorials
  3. Is there anyone who can provide me driver for Yokogawa Energy Meter WT230 which can be installed in Kingview 6.53 SCADA.
  4. Hi All, Has anyone had the experience of connecting two Fernhill Scada units using an OPC UA?  I am intending to use Fernhill Scada on my Master PLC to read tags from my Slave PLC's Fernhill Scada. Then, displaying local tags (Master PLC, "Fernhill SCADA Unit 1") and read/scanned tags from the Slave PLC, "Fernhill SCADA Unit 2". In the meantime, I am trying to use both of my Fernhill SCADA units interact with each other (one unit to read tags from the other unit) by using Internal Digital Tag on the Fernhill SCADAs.  Any help would be appreciated.
  5. Siemens and SCADA system

    Hello !  I have a problem. i'm new in tia portal and all siemens PLC. I woudl like to connect my Siemens s7-1200 CPU 1215DC/DC/DC and HMI KTP700 Basic PN to a SCADA system. Can someone give me some advice? Thank you in advance. i use tia portal v17
  6. mitsubishi Register accessing

    Dear All i want to access a register of plc FX2N-16mr through modbus card FX2N-485-bd .   can any body help me out. i dont know any idea. any help will be a life savior. 
  7. controller is not coming online with rslogix 5000, but i can ping the ip from the pc. getting the error message says "controller failed to come online - error 701-8004250B" appreciate ur help.
  8. Hi everyone, I am new here, currently I am working with AVEVA System Platform SCADA project where SCADA Data need to upload to a database frequently. so I setup a server remotely with database and tables (using Microsoft SQL server Management Studio). and using AVEVA System Platform SQL Data object i made a connection to the remote database and table and also add Attributes same as table Column. now I don't know how to use this SQL Data Object in My SCADA, how can i make it automatically insert My SCADA Data (selected data) to Database Table. Please Help me.
  9. Good Morning,   My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. 10.181.3.104 is lift station 104, 10.181.3.105 is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ?   
  10. I hear a lot of people talking about the annoyance of price estimates (meaning they don't get a clear, transparent price from the beginning) and the costly engineering that seems to never end. Do you think that a step-by-step, clear process and course of action from A to Z would be beneficial for companies? And I'm not talking here about SCADA software, like Ignition. I'm talking about using Ignition to build and implement a fully working SCADA solution, customized to your company BUT you know exactly the price and the methods/processes that will be used (it's a replicable framework to get similar results for multiple companies - and the results would be a SCADA solution without the headaches of the unknown prices and engineering characteristics). Basically, a clear project-based approach rather than an hourly approach where things can get confusing.    Do you think the industrial space could use something like that?
  11. Scada/ Site management

    Hi,  I have basic experience with PLCs but have a degree in electrical engineering. I have landed a job which requires me to advance my plc knowledge. I am based within the UK and need some advice on how to go about a solution to a problem. The site I am doing this for needs a site managment system. The site is within food production, this would be monitoring of mostly trips and faults within a wide range of industrial equipment (Pumps, compressors, fridges). The site is mostly Mitsubishi and would like one centralised portal within the workshop to view all of the equipment availability. Thank you.
  12. Dear Collegues, There are several links with discounts / promotions given below for you to join Siemens PLC / HMI / DRIVE trainings released by myself. I hope that will be useful for you to learn new topics related with your application field.  Also i will be glad if you share these links with your friends who needed, it would be helpful for me for sure to reach more people.  Siemens Simatic TIA Portal Programming 1 V17 https://www.udemy.com/course/siemens-simatic-tia-portal-programming-1-v17/?couponCode=584E8CA038C8EE7C8ADE 100 redemption limited / 30 days Free Siemens Simatic Manager S7 System and Programming 1 https://www.udemy.com/course/siemens-simatic-manager-s7-system-and-programming-1/?couponCode=8888E2A3A67D6917068B 100 redemption limited / 30 days Free Siemens Simatic Manager S7 Applications And Examples 1 https://www.udemy.com/course/siemens-simatic-manager-s7-applications-and-examples-1/?couponCode=A3D5633D7ADE64204100 100 redemption limited / 30 days Free Siemens Simatic Manager S7 System and Programming 2 https://www.udemy.com/course/siemens-simatic-manager-s7-system-and-programming-2/?couponCode=6183387F6558383C6D31 unlimited redemption / 5 days Best price Siemens Simotion System And Programming Course https://www.udemy.com/course/siemens-simotion-system-and-programming-course/?couponCode=A66B21332C52770D8C06 unlimited redemption / 30 days Custom discount Siemens Sinamics S120 Service and Commissioning https://www.udemy.com/course/siemens-sinamics-s120-service-and-commissioning/?couponCode=0BC89844A291C8C539D3 unlimited redemption / 5 days Best price with best regards. 
  13. Citect Scada Modent Bit Read

    Hi team; I am struggling with a Citect SCADA read of some data. The system is using the "Modnet3" driver over TCP/IP to talk with a system (Modnet 3 as its TCP/IP with first register at 0 and 0 to 15 bits). I am reading the modbus data into variables which is working fine for the analogue values all defined as real in citect. The Issue I have is that the driver help says I can direct reference a bit in a word, in my case address 45052.1 Holding register 45052 and Bit 1. If I read this as a UINT I get a value of 147 corresponding to bits 1,2,5 and 8. Citect generates no errors for the tag setup where I define 45052.0 through 45052.15 but all remain as zero in tag lists.  Any help would be fantastic Kindest Regards Howard
  14. Dear Experts, I don’t have much knowledge and now working for a new project of cross-country Oil transportation pipeline SCADA. It’s a pipeline of more than 200 Km with 2 terminals (dispatch & receiving) and several valve stations through the pipeline will be connected with the central SCADA. The communication will be done by OFC placed along the pipeline. Apps of Leak detection system (LSD) have to supply and integrated with the SCADA system. Please suggest me which SCADA software should we use/suitable for the oil transportation pipeline? (ABB/Siemens/honeywell/else) Thanks.
  15. Hello, I need to enter double confirmation on some buttons but I can't figure out how to configure it. Has anyone ever configured double confirmation on button? (citect scada) Thank you
  16. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  17. Hello everyone! I would like to connect a Micrologix 1100 with Citect 7.5 via ABMLXEIP (updated to latest version). I tried everything and it is still not working. The Citect and the PLC are on the same subnet and the ping works fine. All the configuration is done as the manual says (I attach the pictures). I have one NIC card and is connected to the PLC. The role is setted to “Server and Control Client”. The kernel has this error: [ERROR] [CORE] [0x07fc] [IOServer] [(GLOBAL)] [ErrorLog()][errlog.cpp] [266 ] Error: Channel offline, cannot talk CINIT 0015 PORT1_BOARD1 IODev_1100 Error_in_CMD-2 16 Generic 000021 Driver 00000020 (0x00000014) Any help would be much appreciated! Thanks, Gustavo.
  18. So, I have thought about creating my own Business for the last few years. With this business I would go shop to shop/factory to factory teaching anywhere from Basic PLC programming to HMI design and integrations. I love to share any bit of my Knowledge/experience with anyone and I have learned this more when at my first engineering job they had me train several guys on how to start up Servo Motor jobs with PLC and HMI's. I really enjoyed helping others learn and get over the hump of intimidation and lack of experience with electronics and such. I have had a lot of different experience from being an Electrician for 5 years to Engineering 10+ years now- (Design, Software, Startups, Service work, Installs, and Management) I then started a career of being a PLC Instructor (part-time for 1 year now) for adults and this too help me with my idea of starting my business. At my instructing school we would get a variety of people anywhere from fresh out of High School to experienced Maintenance guys that want to specialize in PLC and HMI's.  With all of this being said, does anyone think there would be a great amount of need for someone to come your work place and teach Allen Bradley, Omron, and Mitsubishi PLC and HMI and maybe one day down the road Servo Motors and logic for them too? I think that more one on one with a couple trainer lab stations, I could really help not only workers advance themselves but also companies benefit both? I have gone to training for my previous employers, sometimes traveling far away for a week at a time and costing my employer a lot of money where my rate would be much less and on-site of the customer/trainee's. Starting out I have bought several used pieces of PLC's, Input Cards, Output Cards, (Only Allen Bradley for now). I have also bought cases to make my training units more safe and portable. Looking at creating a business name and logo as well as possibly creating a (LLC). It has been a slow but steady process though. Feel free to add anything or comment anything to this with ideas.   Thanks!
  19. Dear all, I have a FX2N-20MR chinese semi-clon of a Mitsubishi PLC. It has only a serial DB9 port that cannot be removed or exchanged (which is possible in the Mitsubishi original PLC). I wonder if I can make a simple SCADA system using that port and just one computer. I am reading this post: https://forums.mrplc.com/index.php?/topic/9653-fx-series-and-modbus/ And I am wondering how I can do what it is suggested there in the second message:  to use a free FB block, available in GX IEC (but not in GX Developer), which will communicate modbus via a standard RS232 BD board. Later on it mentions a library called ModbSFX. That message is from 15 years ago so I am wondering if now there is some other way to do it, perhaps some other software has that functionality? I don't have GX IEC. I am a student trying to make a project so I would like a cheap and simple solution. Any help to do so will be very welcome. Thanks Regards Marcelo
  20. I am now part of a startup company based on energy optimisation of HVAC in buildings. I am assigned to have research on which SCADA system to select for HVAC energy optimisation. The model is in such a way that, we need to create a SCADA / HMI for the client's building on top of existing Building Management System (BMS) to achieve energy saving.  I am still an intern and I am requested to research on various SCADA options available in the market. I have few doubts regarding: 1. How can I select one SCADA / HMI over the other?  2.GE Cimplicity and Niagara 4 are two option which I am interested in. What is the major difference between both? (Price and functionality) 3. Is Tridium Niagara 4 a SCADA software? ( I read about it but I didn't understand as I am new to this field). Is it same like tia portal which is a software that is used to program plc and create user interface??
  21. The tunisian electricity and gas company (STEG) launched tender a new  project where at least 36 RTU of HV/MW substations shall be supplied as well as other telecom systems. https://www.afdb.org/fr/documents/aao-tunisie-amenagement-du-systeme-global-de-teletransmission-et-de-teleconduite-du-reseau-de-transport-de-la-steg To whom interested: you are invited to participate in this tender. The submission date will be : August 4th, 2021. Best regards
  22. Hello Guys, Im trying to stream camera in indusoft thorigh vlc plugin (Activex), I want to use RTSP to stream, we have the URL rdy, but dont know where to insert Someone tried this before, rly need assitance. THANKS!!!
  23. Here is my setup - Factorytalk view SE V 7.0 with Primary and secondary servers. System gets replicated from primary to secondary once in a week. After the primary server was restarted due to some issue, all the HMI tags lost their values. 'Retentive' checkbox was checked on all HMI tags, initial value field is blank. According to the description of 'Retentive' field in the help file, the HMI tag should hold its value even after the server is restarted if the box is checked. Also, secondary server should have held those same values while primary was rebooting, but as of now all my HMI tags field are blanks. Am I looking at a patch roll up here?
  24. Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for this issue. Thanks...
  25. Do you have a known ac repair expert in contacts who can help me fix the issue i am having with my air conditioning unit?