Search the Community
Showing results for tags 'omron visual studio 2013'.
Found 651 results
-
What is the Use of Number data type for CJ2 Omron PLC? it takes integers as well as float values . we can not map it to D or H memory area.
-
After getting my logic to work. I went in and implemented the logic with my plc. It worked but in order for me to test part 2 of it, I have to turn the machine off and turn it back on as part of a reset feature. When I turn the machine back on, it wipes out my logic and goes back to its default logic. It's almost like I never changed anything. I connected my pc to the plc and connected to plc, pulled up the code and ran it on "Online Mode" where i can make changes and send them to the plc and yet again it wipes out whatever changes I had made and goes back to its default. Any suggestions?
-
Omron CP1L error ""Failed to change the operating mode the operation mode may be still changing in the PLC"
Dpatel43 posted a topic in Omron
So a little new to PLC's especially Omron PLC. I have this machine from Japan that uses Omron CP1L which needed some modification. I made the modifications and uploaded it on to the PLC. When I try to put it in "run" mode it gives me the "Failed to change the operating mode the operation mode may be still changing in the PLC" error. After that the machine does not move even with the orginial plc logic. At first I thought it was my logic and so I double checked and did it again. Same thing occured. Has anyone experienced anything like this? How can I fix the PLC? Thanks -
Studio 5000 upgrade to V28.03 fails on Win 7 64-bit [Solved]
Transistor posted a topic in Allen Bradley / Rockwell Automation
OS: Windows 7 Ultimate 64-bit running on VMware virtual machine. Installed software: Studio 5000 V21.0 Licence: Concurrent (served by licence server on another PC). On starting Setup.exe from the VM's desktop I get the message "Studio 5000 does not support this version of windows" Any ideas how to proceed? -
Hello I'm quit new in this world and i have several doubts about the comunication of EIP. I'm trying to capture the comunication betwen a CJ2M and an NS8 HMI. I was trying with MolexEIPtool, so i could understand better the communication process and i did a little. Here is the wireshark capture of an get all attributes request: CIP_Molex_tool.pcapng (The last two packets are another unconnected request). I can see the request for list services, the register sesion request and the Forward open request. Then, i can see the request for service "get_attributes_all" and how the cj2m responses with all the attributes. Finally, the forward close request. But when i put my computer betwen the two devices, i cant figure it out what is happening. Here is the capture: CIP_OMRON.pcapng I can see that the packets are "SendUnitData", so i think it is a connected transmision, but wireshark cant decode the rest of the frame, so i dont know whats going on. Thanks
-
Does Omron CP1E support Ethernet/IP? i think it only support FINS not ethernet/ip . Can anybody confirm this?
-
Does CJ2 Omron PLC support absolute or symbolic adress or both? If absolute then we have to give FINS command to communicate over ethernet/ip? Need an urgent help .
-
Hello, I am trying to connect a Weidmüller UR20 Ethernet I/P (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word). When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.
-
C# CompactLogix Ethernet/IP Communication
ahmetnoktacom posted a topic in Allen Bradley / Rockwell Automation
Hello, I want to do a small scada for Allen bradley plc on C#. I did a hmi/scada for Siemens S7-1500 plc on C#, it is working and free. I dont want to use Advanced Hmi. it is looking free but I can not use it in industries as free. so I decided to use direct C#. Do anybody has sample program, code, document, library, link, etc.. about C# and Rockwell plc communication? second solution and question, if anybody has no solution; I may solve it with modbus TCP. but I dont know Compact logix L27ERM CPU support direct modbus tcp protocol. if anybody has knowledge about the modbus tcp protocol document, sample program etc.. I can try to communicate with modbus tcp C# and Allen Bradley. Thank you in advance. -
Hello, I'm fairly new working with OMRON NA5 and I was wondering: Is it posible to load a pdf file in Runtime so I can see it on screen? I know I'm supposed to load the documents in resources but that would be when I'm programming the project in Sysmac Studio before download it to the HMI (see Image_000 attached), but I have no idea regarding how to load files to the root directory while the project is running I mean, is that function avalieable in the NA5? I think I could use its ftp server but I'm not really sure, I'd appreciate if any of you could guide me regarding this issue or if there is an OMRON manual regarding how to access these directories and such.
-
Is there any way to establish a variable as min/max value of a gauge on sysmac studio?
-
Communicate Omron E5CC temp controller with Omron PLC using rs485
Maniesh posted a topic in CX-Programmer
Hello Guys, I would like to learn how to communicate a temperature controller omron (E5cc) with Omron PLC s, using rs 485. I Did some diggings and I found out an instruction called PMCR, but I have no idea how does it work. I personally knew that it is possible to read and write data into the temperature controller, but I dont know how to get it done with ladder programming. I do need to learn how to do this in full. Please help me out. thank you <3 <3 -
I am using an Omron NJ controller and a Cognex Dataman 260 bar-code scanner. At this point I can trigger the scanner and receive data from the scanner via ethernet/ip. My issue is in converting the response from the scanner to something human readable. The bar-code I scanned reads "872-3GSq". The results of the scan are located in the variable Dataman_to_NJ[8]-[11]. At some point I know I need to use the SWAP function but I believe my lack of data type knowledge in this system is hindering me. How can I convert the value in Dataman_to_NJ[8] to the string "87"? Any assistance would be appreciated.
-
Hello everyone, I am working with a NB10W HMI connected to a PLC NJ by Ethernet protocol, I would like to know where to start regarding the sending of data from the PLC to the HMI. I have a 50x15 array and should show all those values in the HMI for read / write. How to proceed? I started working with PLC for a while. I'm using Sysmac Studio to programm the PLC and NB designer to the HMI.
-
Hello everyone, I need the help to do setting of datalink between CJ2 and LOGIX-5324ER. The Allen bradley PLC was programmed by contractor and I have no software of it, so I am doing the network setting in CX-one network configurator. I tried to do the instruction in the Quick Start Guides on Downloads section here under Omron, but I couldn't find the option to register tags in network configurator. Is there anything wrong here? or is it possibly because of that they not support to do a datalink in these version of PLCs? They appeared like these in the pictures.
-
Hi recently I have seen Omron Europe and I have download an app for Android and iOS, that app can allow you to remote view HMI types NB,NS and NA9last from Omron). The reason of all of this, is if some body have try this app and also if communication and remote view was creat it. I have try all my best but still can't make it, if some body did it, could you please share it?. Thanks, Jose
-
Hi all, I’m having some problems regarding a digital input from a remote ethernet coupler input. My setup contais an Omron CJ2M cpu33, a switch, an Omron NS5 HMI (also ethernet) and 10 Wago Ethernet/IP couplers, all of which have 2 digital in- and 2 digital output cards. Every machine cycle all couplers recieve an input from a regulair proximity switch, this signal is high for about half a second and switches at a frequency of about every 2 seconds. Despite the fact there’s no high speed stuff going on here, the pulses are not processed properly. Monitoring my program I can see that the inputs are skipped and somtimes are not processed even for several machine cycles. Is my network too slow, can it be a scan time issue, or something else. I’ve come a long way building this system but I’m still fairly new to plc programming. Hope someone has a suggestion. Best regards, Andy
-
I'm looking at project with an OMRON NJ-101. I was planning on using Modbus TCP/IP from the PLC to talk to a MOXA gateway (MB3170) which would then talk to about 7 different slaves over RS-485. Looking at detail at the blocks that are supplied by OMRON (MTCP_NJ V1.3, available from https://www.myomron.com/index.php?action=kb&article=1245), I noticed that it doesn't send the slave ID, which will mean that it won't be able to talk to different slave ids through the one IP Address. I had a look through the actual code and it sends "FF" in place of the slave id. In particular I was looking at the "MTCP_Client_Fn03" block. Is there another way to get the NJ101 to talk the full MODBUS TCP/IP protocol? Is it possible to edit the blocks provided by OMRON? It seems to me that they are locked down. If I could edit it I could just add the functionality Thanks for your help in advance.
-
Howdy, So the program I have has linked up and I've downloaded to the Omron NS-10 just fine... other than when I go to certain screens the text from all the descriptor labels are gone. I can't figure out if its a setting or if its just getting lost in transmission somewhere. Halp. Thanks,
-
hallo, i have problem here. i want to connect HMI OMRON NB7W-TW00B to weighing indicator with Modbus RTU rs485. i use this link https://www.myomron.com/index.php?action=kb&article=1538 for wiring diagram for rs485. and the baudrate, databit, parity check and stop bit is same between HMI and weighing indicator. but the output in HMI is "[2] PLC No Response: 00-01-2" i think the problem is my rs485 connection. can you help me? thank you.
-
Hi there, I’m not sure how familiar most of you are with Wago remote I/O, but I hope you may have some solution for the following connection problem I’m having. I’m working on a project to modernise an old folder collecting machine for which I’m using an Omron CJ2M Cpu33 together with 8 Wago 750-352 remote I/O units over ethernet/ip. These Wago units all contain two 8DI digital input cards and two 8DO digital output cards alongside a 750-610 bus power supply card. Adding them to my network in CX network manager is no problem and all seems to work fine. That is, as long as I don’t physically add the bus power supply card, which I need to, well.. power the Wago bus. Soon as I add this card (which was in place while making all the necessary settings to the Wago and Omron units) it just won’t connect. Remove it and it connects like it should. As far as I know the power supply card has no I/O addresses or other communication functions whatsoever, so I can’t get my head around it. Even stranger is that when instead of it I add an analog input card, with bus power connections build in, it connects without a problem. The .eds file only contains info about the main Wago unit, after installing it I should be able to add any kind of I/O card and address them in the Omron software. Also, the supply card is added and visible as a fifth card in the Wago I/O settings and the I/O status led is green during this error. Therefore I would say the problem is at the Omron side. Any sugestions? Thanks in advance Andy - The Netherlands
-
Hi All, I've been perusing this forum and I've seen this topic covered before, but I still can't make heads or tails of how to do it still. I'm trying to vary an analog output 10v signal to talk to a VFD according to how much time a certain input bit is energized. Currently I have it set up as a totalising timer, trying to move the PV into a word so I can use it to scale an appropriate output. The trouble is, I'm not having any luck getting the output to do much of anything. No errors show up. For reference, I'm using a CJ2M CPU 12 PLC and the output I'm trying to program is a DA042V, its in slot 05 of the main rack. I'm trying to scale a 0-20 time to a 0-10V signal out. I used to have a problem and I was getting ~-.5V out of output 1, but I enabled a bit and now it's hanging out at 0V. Clearly I did something right. Any help would be much appreciated. I'm sure it's something silly, and I'm new at OMRON PLCs.
-
Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture. https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.
-
How to delete FactoryTalk View Programs
hboyer90 posted a topic in Allen Bradley / Rockwell Automation
Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard -
Hello, this is a noob question on how to code properly. Im trying to do something like this on a code editor inside HMI (NA5) Page: For i = 1 to 100 Me.Button_"i"_Line_ON.Enabled = True Next i The code is more complex than this, thats why I cannot use the Animation tab feature on the interface to set Enable The number of buttons are 100, so I dont want to go 1 by 1. My poor knowlegde on Visual.Net and searching engines does not allow me to find a solution for this in a short lapse of time. Anyway to do this? Thx in advance.
