Search the Community

Showing results for tags 'omron servo'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 592 results

  1. Hey,    a couple of days ago it worked just fine, they reacted to each other like they were supposed to. but after I uploaded the exact same file (but with 1 extra word button) they don't seem to see each other anymore, I've checked the IP adresses and hardware connections but everything is fine....     whenever I click something on the HMI I keep getting an error which says '' time-out error occurs while downloading by the following case: -disconnection from the cable  -Stopped host -Incorrect time-out period                allocating host: host3   does anyone here have a solution or any tips for me?   kind regards,  Deuslupos
  2. Good day everyone, As everyone knows, NB designer is not as good as CX-designer in general terms. My case is this one:  All systems at my company use NS series and some of them NT series PT's.  So there're 20 of them, or so.  Now, I have bought a new NB5Q-TW00B, and I need to program it. Is it possible to migrate the program from a NT or NS, to a NB ??  I've read you have to design all the project again.  It'd take value time just to copy the same project.  I think it should, because it's the same brand of Operator Panel, Omron.   Thanks.
  3. Hi, i have to connect few PLC on the same subnet, there are 3 Omron CJ2M and 1 AB L33ERM/A, the connection should send some words between one of these Omron PLC to the AB   I've tried using the "Explicit Messaging" but i cannot send the data, i only receive the error "514" and nothing more, what can i try?
  4. hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,
  5. omron ea5k-aa2-500 help

    hello, looking for some troubleshooting help with an omron ea5k-aa2-500 controller. I work in a conveyor belting shop and the controller in question is one of two used in the control box for one of our belt presses. the controllers work in tandem to control the temperature of the bottom and top of the press heads. Recently a co-worker was dialing down the set temperature on one of the controllers and might have went out of the limits of the program. Now it is stuck in some type of shutdown loop. When powering it on it displays "0000" on display#1 before showing the temp. value and the set value of 0 for a split second , then turns off and loops. My question is if there is someway to reset and re-program the controller, or is it time for a new one. Sorry for the lack of knowledge of the controller, any help would be greatly appreciated.
  6. DC motor with encoder

    Hello, The company that I work for wanted me to design and build a FIFO loader. For those who do not know what a FIFO loader is, it's basically a lift that runs up and down and filling up the magazine slots with pcb's. After I finish the mechanical part i'll try to program it by using a CPM2C - 20. I have already played with CX-programmer and learned my self a bit, for example how to program simple things such as AND and OR gates for controlling motors and lights. Really hard part for me was figuring out how to create a program that reads data from the encoder and use it to create positions which the motor will stop at, and i have not yet figured it out. I've been trying to google it without any luck, the only thing of real info i've got is a 650 page long pdf file or CX-Programmer manual which is hard for me to read since i'm new to all of this. Would be great if any of you people got any source or maybe a manual which are easy to understand for new beginner like myself. A bit about the program i would like to make: The FIFO loader will have some buttons for selecting different programs, lets say you press first button to select "program 1". Then the machine should move up and stop at posision "50" (there are 50 slots on PCB magazine) after it gets signal from pneumatic actuator (which will be used to shove pcb inside the slot) its should move to position "49" and so on.. If FIFO loader is located at "home" position and you press second button to choose "program 2", then it will move to slot "49", wait until it gets loaded, and continue to slot "47" and so on.. The meaning of this is to make a loader which can select a program to fit pcb's with different size of components.
  7. hello guys is there any one know how to setup default gateways on OMRON PLC CJ1M? cause there is only setup for IP address and Subnet mask.. am trying to control the PLC using Ethernet through Wide Area Network.. so if there is no Default Gateway, the connection PC to PLC will totally lost
  8. I have an application I am currently working on where I have a single AB ControlLogix PLC that needs to read data from 12+ Omron CJ2M PLCs.  The Omron PLCs don't need to read any data from the AB.   I have tried several things including the generic .eds file from Omron and the instructions in the document I found on this site:  Omron CJ2 to Rockwell ControlLogix Ethernet/IP Datalink.  The generic .eds file gave me a D6 error on the Omron side and after talking to support it does not seem like the correct path.   When I tried following the instructions for the datalink I ran into several issues.  The first issue was that after configuring my network in the Omron software upon trying to load it I got a unit mismatch message for the 1756-EN2T, the .eds file I have is for a 1765-EN2T but the card shows as a 1756-EN2T/D, so I am concerned that could cause an issue...that being said I can't find any .eds file specifically for the /D revision.  The next thing I noticed was that there doesn't seem to be be a way to link the produced data from the Omron to the AB, the Omron configuration software with the AB .eds files loaded only gave me the option to send data to the Omron which we do not need to do.  I created a generic Ethernet module in my RSLogix program for the Omron PLC and then created a consumed tag and linked that to the module but I do not see where I set up the link on the Omron side for that, so how does it know what addresses to read?? Any help would be greatly appreciated!!!! Thank you!
  9. Rajan

    Hello Experts  I am facing problem with CJ Series Analog I/O module MAD32. The Run LED is Lit, ERC Led is also Lit. what could be the reason?
  10. cx supervisor runtime failed

    my CX supervisor runtime has failed. when i build a runtime, SR2 built succesfully, but when open the SR2 file theres nothing pop up on my runtime. Event/ error log tell that failed to open device, non-specific error occurred: PLC, [CX-Server: MANAGER, ERROR, 0x8825]. How to solve this problem..please help me
  11. Hi guys, I'm having a problem on how to save the home position for omron servo driver. How does the servo driver know where the home position is after turning on? Btw, I am using Mitsubishi FX3u for my PLC
  12. Position Controller

    hi, im student im trying to make a position control with the misubishi serie of servos, i have 2 mr-j2s-20a and 1 fx2n-20gm i was reading the manual i didnt readed all yet, i wat to know if i can control the position with a fx2n plc and if someone can send me a example of a code using it. thx for your attention 
  13. CP1E MODBUS Maximum Slave

    Hello everyone, so I noticed in Omron's CP1E manual, there are no certain info on maximum number of Modbus Slaves that can be attached, however the PLC itself able to connect to slave number 1 - 247 I have read from common MODBUS specs, that 32 slaves are the limit for most MODBUS connections. However there are also statements that with proper design (1/8 transceivers) that we can extend number of connected slaves to 256. Anyone have experience or info about this with Omron PLC? Thanks in advance
  14. plc to pc using fins

    i have this code in c# in order to communicate to cj2m using etheret cable , but i get a connection error ( u can't reach : 192.168.250.1 :9600 ) is there any configuration that need to be done on the plc ? i mean i don't quite get (the node and all thoese properties i fnd on cx-programmer) ?
  15. 502 port error

    Hi  i am trying to connect to omron plc (cj2m ) using modbus tcp/ip , by using the port 502 i  get an error saying that the port can't be reached is there any method to fix that or change the port number ?   thank you 
  16. port 502 error

    Hi  i am trying to connect to omron plc (cj2m ) from my pc  using modbus tcp/ip in c# , by using the port 502 i  get an error saying that the port can't be reached is there any method to fix that or change the port number ?   thank you 
  17. Program 16 position rotary selector switch

    I have a 16 position rotary selector switch I'm trying to program to a CQM1 PLC, that I will also be programming to a micrologix 1200 in the future, using CX Programmer. The switch connects to the PLC using 4 inputs, and activates the inputs in a binary pattern 0-16 as I turn the switch. For example: if the switch is wired to the first four inputs of the PLC, and is turned to "9" 0.0 and 0.3 will be activated and 0.1 and 0.2 will not, just like binary 9 = 1001. I have tried several things trying to get the PLC to accept these inputs as a single "data-point," and then convert to BCD or Hex to use in a timer. I'm having no luck! Does anyone have any ideas how this is done? The switch is a Tosoku DPP01 015L20RCB, and because of the age of the PLC my instruction set is limited. Thank you in advance!
  18. Beginners Servo Help Required.

    I have been programming Omron plc's for a while but have not used any servo drives. I have customer who is free issuing the following equipment for a project he wants programmed.: cj1m cpu21, r88d-gt04h, r88d-gt08h, r88m-g40030h, r88m-g7503h-s2. The small drive is connected to a simple ball screw moving a stop. The second drive is connected through a gear box and chain drive full details not known to date.  I have read the cj1 manuals and will be generally using  pls2 commands for the position movements.  Are the drives plug and play? If I connect the drives leaving the parameters as out of the box defaults should the drives operate using the pls2 command. In this condition I assume it is 10000 pulses per rev of motor. I can scale positions with maths in Plc and send the required pulses. Any guidance appreciated to confirm I am on the write track. I assume I could also use the electronic gearing parameters. Any examples using 5mm ball screw!    
  19. Good Day! i have an omron hmi and i would like to connect it to sengenuity wireless temperature sensor without a plc..is it possible?.. see the youtube link for the video sample https://www.youtube.com/watch?v=F_MPLS9ih4g         Thank You for your help.  
  20. PLC sources?

    Hi guys, Im new to PLC and im just starting out with the omron cp1e-e. What are great sources for ready files? Is there anywhere online where i can look at different programs for different scenarios ? Thank you
  21. Hi, there, I'm totally new to OMRON PLC, right now I'm using CP1H PLC have two CP1W-CIF01 on it 1st CP1W-CIF01 set as 115200, 7,2,E, Host Link, station 0 connected to Pro-Face HMI 2nd CP1W-CIF01 also set as 115200, 7,2,E, Host Link, station 1, I want to use this COM to talk to my PC that I can run vb.net program to monitor the bit and set the bit value. can you guild me how to start this project? thank you very much! Chen
  22. Hello Dears, I am studying to control position via Mitsubishi device Now, I have Q172 CPUN and MR-J2M(MelServo) to control position. But, I didn't find manual that explain command and parameter to do it and it has the example to do it. who have experience to control position, pls help me to overview it. Thanks so much!
  23. CP1E with expansion card

    HI, i am new user here and it is my first time using Omron PLC.I fail to add the expansion cards (CJ1W-3ER AND CJ1W-ADO41) to CP1E-N40 CPU.There is no I/O table listed for this model in CX-programmer.if i change to other model, yes, there is IO table, but CP1E without the table.   Appreciate for the help to add in the expansion card in CX programmer. Thanks in advance.
  24. PLC Input Output sequencing

    Hi all , new on site and looking for some help please. Need simple solution to the following example. Imagine a clock face. At every 45 degrees , I need an input and an output from the same input some milliseconds later. Before I get to 90 degrees , input 1 is now off awaiting input 2 at 90 degrees and so on. For my 360 degrees , this would require 8 inputs and outputs with only one input / output active at any one time with the program repeating the sequence continuously when back to zero degrees. Info please on suitable small inexpensive PLC and any suitable position feedback device , thanks , Al..//