Search the Community
Showing results for tags 'omron nt20s screen problem'.
Found 556 results
-
Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
-
Hey, I am fairly new to the NA screen so I didn't get time to research much but for some bizarre reason, if my alarm message is long instead of going to the next line it just continues. Is there a specific way of creating a multiline alarm. Any suggestion or if you have inside for a crash course on NA screen would be helpful. Thanks
-
Hello, I am having a bit of trouble with downloading my program to my NS8 display. I have tried using both USB and Ethernet. I have set the display to 192.168.250.7 and my plc to 192.168.250.1, and I am using a switch to communicate with both of them from my PC. I have tried communicating with both USB and Ethernet directly from PC to PT. The problem occurs when I try to download my program to PT. When I start up the PT with USB connected to my PC it stops at 'Starting up FinsGateway...', and I get a notification on Windows 10 saying "USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it." I have tried updating drives, but it says that the most recent updates is installed for the device. I have also tried installing the drives in my Omron folder. Downloading through ethernet results in downloading and stops with a time-out after a few minutes. Connecting to the PLC with USB works fine. The PT display is set to network address 1, node address 8. If there is any more information needed to make the problem more clear I will provide it.
-
I am fresh out of school and new to automation programming. My employer has asked me to come up with a way to show through the HMI the position of an encoder. Are there any HMI tools that do this in sysmac? Again I have limited experience. Thanks
-
GT2310 <--> F800 communication error, communication is established
MarkusR posted a topic in Mitsubishi
Hi everybody, I have a GT2310 communicating with the Mitsubishi F800 VFD. I am using the Freqrol 800 communication driver, connected to the RS-485 terminals of the GOT and on the F800. The comm settings are the same on both devices. I also tried to use the “auto negotiation” setup. I have communication between the two devices. I can read and write to F800 registers. Anyways, The GT designer diagnostics is complaining about a communication error in the system alarms. The error can be reset but it will appear again. This also happened when I created a new, empty project where just the communication was setup as described above. Did anyone experienced the problem and how to troubleshoot / solve this? Best regards -
I am trying to setup a MAD42 analog card up in a cpu33 omron controller. I need input 1&2 setup for 0 to 10 volt and can't get it to work. Any help is appreciated.
-
ModBus RTU communication between Omron CP1E (CP1W-CIF11) and an Arduino using MAX485 RS485 transceiver
José Silva posted a topic in CX-Programmer
Hello everyone! Briefly introduction, I would like to communicate and test the following hardwares: 1- Omron CP1E (using an Option Port CP1W-CIF11) ; and 2- Arduino Nano using MAX485 RS485 transceiver. The CP1E will operate in "Modbus-RTU simple master" as illustrated in image 01. The arduino will be in slave mode address 1 and the library used is "SimpleModbus NG" ( https://github.com/angeloc/simplemodbusng/tree/master/SimpleModbusSlave ). Taking the sample in official manual ( https://industrial.omron.eu/en/services-support/technical-tools/downloads#cp1e ) , pages 248-253 in the "CP1E CPU Unit Software User's Manual" (Image 04) describes a sample communication to an "Inverter Slave". I want to use the Arduino Slave as the Inverter Slave just to be sure that all previous steps are correct. Therefore, I would like to know: 1- As illustrated in Image 02, Am I missing any resistors? 2- Should I connect the GND to the FG? 3- In this scenario, the DIP switch setup should be as illustrated in image 03? Only DIP4 is OFF. 4- Can I test it just forcing A641.00 and checking the DM Area Data, as shown in Image 05? The code used in it is the following: // Wiring: Arduino and MAX485 // RX0 - RO // TX1 - DI // D2 - DE/RE #include "SimpleModbusSlave.h" enum { REGISTER_0, REGISTER_1, REGISTER_2, REGISTER_3, REGISTER_4, REGISTER_5, REGISTER_6, REGISTER_7, REGISTER_8, TOTAL_REGS_SIZE }; unsigned int holdingRegs[TOTAL_REGS_SIZE] = { 0, 1, 2, 3, 4, 5, 6, 7, 8 }; void setup() { modbus_configure(&Serial, 9600, SERIAL_8N1, 1, 2, TOTAL_REGS_SIZE, holdingRegs); } void loop() { modbus_update(); } Any answer can be helpful. Thank you for your time! Regards, Jose. -
I using easymodbus library to connect and read data from 3 PLCs CP1L but it run unstablely, sometime it disconnect and i cant re-connect PLC, it give error time out when i try to reconnect when it happen, i restart PLC and everything back to work. Someone please help me. I am new with modbus and omron
-
Hi all. I have a question about how to set up the motor in rotary mode. My application will be a basic rotary table driven by a servo motor without gearbox between. So, in my servo drive axis settings, I select the motor as a rotary mode. then I defined the maximum position setting value for 360 degrees, and minimum to 0. So far so good. But the problem comes when I want to make an absolute move using the mc_moveAbsolute to move 360 degrees. Whit this settings the error "target position settings out of range " will come up. So, what is the solution to rotate 360 degrees without generating this error? if I set up the maximum value to 361 degrees and then if I rotate 360 the error will not occur and the motor will rotate 360 degrees as I aspected, but it's this correct ? or there is another way to do it? Thanks
-
Hello, i'm newbie for plc. i want to ask about PC/computer send data to PLC CP1E with serial communication (RS232). my wiring cable is: PC PLC 2 2 3 3 5 9 4&6 7&8 4&5 and if i send data from PC to PLC, my indicator in COMM is blinking. i think the cable have no problem. but if i send data from PC to PLC, the memory is not same as what i send and whatever i send data, the memory didn't change. i will attach my ladder diagram. what should i do? New folder.rar
-
Hello All I am new to PLC programming , i have a question regarding omron PLC and High speed counters. I am using Cp1H-XA model plc . I connected HSC port 0 with a encoder and i was able to get the speed of the encoder using PRV2 instruction. Now i am trying to connect the second encoder from the servo motor that i am using to HSC port 1. I am getting the PV signal using PRV instruction . Is there a way to calculate the speed of the servo encoder connected the HSC port 1 using PRV command , since i can't use the PRV2 command for the servo encoder . Thanks in advance .
-
How to set MC_HomeWithParameter instruction
worawut tunsukee posted a topic in NJ Series / Sysmac Studio
How to set Homing parameter slot with _sHOMING_REF data. Please suggest me to setting MC_HomeWithParameter instruction or show example for using MC_HomeWithParameter instruction. Thank a lot -
Greeatings . I have modicon TSX premium plc (TSX P57103) I have problem i cant connect to my plc. I have tsx pcx 1031 cable and have com port on one PC and on the second i have connector to this cable with usb. when i try xway test i have problem , the request is always 0 . Can someone help me ???
-
Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.
-
Halo, my name is Riandanu, I connect PLC Omron CP1E to weighing scale, and its done. i think i dont have problem between PLC and weighing scale. And i want to ask about, how to compare value from weighing scale ? example : from the picture you can see value of weighing scale is " ST,+00160.66 g", and i want to compare it with 180 or 150 to give output on to lamp. Thankyou Riandanu PLC to ek-i.cxp
-
Design Improvement Ideas : I currently use a 24v DC slipping brake (either Clarke or Warner) to prevent a reel of film from over-rotating - With Previous motion controllers - i have used timers at first then progressed to using a Virtual axis and a switch to make my pulse from NX- Digital output card to a Solid State Relay (PSWITCH command for anyone familiar with TrioBasic) and this has worked pretty well. I have the same physical setup on a new piece of machinery but am now using NJ and Sysmac - Have used a TOF and TON in inline ST to control brake and it sort off works - brake can feel a bit lumpy and can chatter and bounce a bit adn am worried about the reliability when the machine is running and the controller is doing more. (brake cycle time t#10ms and tried at 100ms also) I did try using the Time Proportional Out FB - but this was far worse than the above. I think i will try my luck at created a new virtual axis e.g. Rotary Mode - min 0 max 1000 Run with MC_Move_Velocity when Machine is running and use an MC_digital Cam Switch to create my output Pulse. I am new to the Forum and trying to get more involved with others rather than working in Isolation - so wondering if anyone has any suggestions or thoughts or have done anything similar in SS? Thanks in Advance,
-
Hello, I am using Omron CP-1E PLC and expansion module 16ER and tc module. When plc operated alone it goes to run mode when expansion module is connected either 16ER or TC module plc ALM/ERR led turned on.
-
Omron 3G3MX2-AB004-V1 Inverter (VSD) Homing & Relative Move FB??
ric007ishere posted a topic in NJ Series / Sysmac Studio
Hello all, I have a Omron 3G3MX2-AB004-V1 Inverter (VSD) connected via EtherCAT that I need to reference (home) and also perform a relative move. I am looking for a Function Block with the following Inputs/Outputs for my Omron NX1P2-1140DT1 PLC for use in Sysmac Studio. Inputs - Takes the Encoder signal as a Position obtained via a Motion Control Axis (setup as an Encoder axis) - Takes a Homing sensor input (Sensor triggers on each conveyor belt cleat) - Take either a Reference or RelativeMove signal (to Home the inverter or MoveRelative respectively) - Takes the distance to move for a RelativeMove Outputs - Forward - Reverse - Velocity - Done - Busy - Error Has anyone done this before from a PLC FB for this inverter who could help me please? Many thanks, Richard -
Hi, I have .fbk backup file of iFix aplication (i mean).. When I try to restore it by "Backup&Restore Wizard" in part where I "Browse" the way to Backup file and click on "Next" is problem. Pop-up window show -> "Bad file format. The archive file may be an old version or a wrong version in header signature or is not a Proficy iFIX full backup file (.fbk)" .... My question is = Is possible to find what of version is my backup file ??? when i suppose this error mean i have installed wrong version of iFIX sofware (my version is iFIX 5.5).. Or is no problem of my iFIX version ? Thanks
-
how to connect cpm1a to ns5 hmi? cant do it
-
Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form. http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
-
I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2 superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings.
-
Hello I'm new for PLC, I need to set pump turn ON/OFF in 4 time/day every day => [8:00-8:10]a.m, [11:00-11:20]a.m, [2:00-2:10-14:10[p.m, [5:00-5:20]p.m ** I have Omron PLC CP1E-N30 , Could you advise me, please ?
-
My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub... But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
-
I am using CJ2M PLC.I want switch on a output for certain time by a timer and holding bit if interlocks satisfied.If interlock not OK timer has to hold the time and output should be off. if again interlocks OK again output has to ON upto balance time completion and has to give timer done output for reset holding bit.please suggest.
