Search the Community

Showing results for tags 'omron nt20s screen problem'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 391 results

  1. Hi all I was being really clever and suggested i add a list of preset settings to a line which every1 seemed thrilled with. however the amount of tedium has just dawned on me. im hoping theres a better way to go about this. the main idea is that we have a line controlled from a cj2m which has around 150 changeable settings including things like conveyor speeds, pump filling times.. waiting times etc.. i have done this in smaller scale before where we had changeable pumps, when pump 1 was connected i used the MOV function to load pump 1's data into the correct words. and in NB designer i had layered multiple number input boxes each displaying only when its own pump was connected. any ideas would be great
  2. Hi; I have a DUPONT brand machine having OMRON PLC CQM1-CPU21-E. I have CX Programmer installed in my Laptop having W1indow10. I want to go online but finding a way forward. I have an interface unit OMRON CPM1-CIF01 but failed to build communication. Please help me out.
  3. HI all i was wondering if it might be possible to edit the name of a word switches state. I'm creating blank presets for a machine lets say 1-10, i would like to use the drop down word switch which would display preset 1-10. is it then possible to edit preset 1's name to something like "8mm diameter" by using the notepad function on nb designer and directing that to some location on the plc? any idea or different methods would be great, or even if its not possible. thanks
  4. FINS Communication with C++

    Hi, I'm having a little trouble connecting to a PLC from my program. I thought my previous post a few months ago fixed it, but apparently it did not do much. Here is my code: And here is the resulting reply from the PLC after converting it to hexadecimal So far, I've narrowed it down to the issue that my program is sending 64 instead of the 18 that was specified by the FINS command. I assume that the received error is due to the fact that the PLC did not receive the correct instructions from my program. The "End" is not sent by the PLC, it is a personal note for me to know where the received message ends. My goal is to simply receive signals from D00 to D68. I imagine that the received string should be in the form of: 00 C0 00 02 01 01 00 01 00 00 01 01 [Response Code] [Data] Can someone help point out where I can start looking for why my program is sending 64 instead of 18? I do think I am messing up something simple here, but I'm not sure where to start. EDIT: To clarify the models, I am connecting over Ethernet to an Omron CP1L-M40EDT with CP1W-CIF41 Thank you in advance!
  5. Flip flop in structured text

    Hi all i've been trying to make a simple timer in structured text which is turned on and off by a single input, all instances of flip flops i have found seem to be 2 input. any help or examples would be appreciated example of programs; Pulse signal received, start timer Pulse signal received stop timer
  6. Pressure transmitter drift

    Hello all this isnt strictly omron/programmer but has anyone used much in the way of pressure transmitters? we have a wika s-11 pressure transmitter on one of our machines installed roughly 7 months ago where the scaling does not seem to be linear, i only started working here around that time so i dont know how it was installed etc. but its a 0-40 bar 4-20mA transmitter connected to an ad081 4000 resolution connected to a cj2m. so the conversion should be nice and easy 100 raw data = 1 bar however it seems to be scaling logarithmicly to me as we checked with a 2 different guages and when they were at 2 bar the transmitter was showing 137 raw data and at 8 bar it was showing 737 raw data and this seems to keep scaling in this fashion as we get to higher bar. is this a common fault on transmitters? is there anything else that could be causing this? how often would you normally expect a transmitter to last? i checked my scaling FB on another transmitter connected to a compressor and it worked correctly so its not the maths used   thanks in advance
  7. Hey, I have a project which one part involves using a RTD PT100 (0-100 Deg.C 4-20mA) connected to a CJ1W AD041 (ATD input card), the PLC is a CJ2M Basically the PLC needs to read the RTD and display the temperature on a Omron HMI (NS10), via Ethernet, Could someone please help me out with a basic example program - to read and convert the RTD - ATD value to store in memory. Your help would be most appreciated. Thanks  Richard       
  8. Dear all, Does anyone have a NTXS verion 1.03? I can only find ver 1.04 in the internet. I am having a trouble while replacing NT3S-ST124B-E. The old one is using RS422 Communication. using a 5 cable in pin 1, 4,5,8, and 9. But it can not communicate after i download the old program I uploaded(firmware ver 1.03) to the new unit (firmware ver 1.04). it keep saying com 1 Communication Error.  From the manual NTXS software, I discovered that the communication driver supposed to be downloaded together with the firmware.   I used this cable RS-232 connection for programming (upload /download) and it works perfectly fine: db 9 Male (NT3S-ST124B-E) to db 9 female (PC) 2 to 2 3 to 3 5,9 jumper to 5   The program i managed to upload using NTXS 1.04 in Win 7 32 bit and sucessfully download to the new NT3S in Win XP 32 bit (tried so many times but it fails on Win 7 32 bit). The program says that the NT3S is connected to CJ1 PLC. The cable used to connect to the old NT3S is using Pin 1,4,5,8,9 which means it should be RS422 (Xtra Drive). I wanted to try using version 1.03 but I can not find it.   Regards, Budianto Scanner NT3S.pzm
  9. Good day everyone, before I start asking my question, just want to let you all know that my knowledge with PLC is not that good. I'm still learning on how to do it. So currently I'm working on a project that trying to obtain data from Omron PLC. I was told that I can't touch the Omron PLC program or modify it. That Omron PLC is connected in an isolated network within a router. Other than adding Network Card on the device, can I use another PLC (any brands) to get the data from that Omron PLC through the router? The communication protocol using here is Ethernet. Can i just tapped into the network and take the data with that way? Or the other method I'm thinking is that, the Omron PLC will feed the data to a server, can I just obtain that data from server by using OPCUA? I heard there's some PLC that have the OPCUA function, I just make my PLC into the cilent and request the data of that Omron PLC from server through Ethernet. Is this possible? Please let me know whether my method works or not, thanks in advance guys!
  10. CJ1W-EIP21 to ControlLogix

    Hello, Just made this account to get an answer hopefully quickly. I have an existing Omron CJ1M that is talking to a ControlLogix over a CJ1W-EIP21. I don't have experience in configuring Omron PLC's, but the Omron and Allen Bradley are already messaging to each other. My question is how can I get more words to be transferred between the two plc's? There are already 4 words (INTS) being transferred and are working properly but I have used up all the bits and am now needing at least 2 more words. I know in RSLogix 5000 I need to make the array size bigger, but where/how do I do that in CX-Designer? Thank you for any help.
  11. IOT Omron

    hi everyone, im new here. I have a question, how to connect PLC Omron to Node-red (for IIoT)? if PLC Siemens, it has Siemens IOT2020 to connect PLC Siemens to Node-red. Do Omron haveit own iot gateway like Siemens?
  12. Greetings everyone. I'm new here. Hoping to get help to operate the Omron V400-R2 barcode to the Mitsubishi QJ71C24N so that they can communicate the two devices with the correct method. PLC: Mitsubishi: Q03UDVCPU; barcode: Omron V400-R2; serial communication module: QJ71C24N. I use RS 232 communication cable, I have tried using predefined protocol and non protocol procedures but still can't communicate the two devices. I really appreciate your help.
  13. Hmi temperature delta

    I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi  it's give errors. Com 2 errors  I need someone help me to connect these devices please 
  14. FTP from OMRON NX1P PLC to a Delta HMI

    Hi all, I'm looking to try and send data from the SD Card on my OMRON PLC to a flash drive on my Delta HMI - DOP107WV using FTP. So essentially I need to use the HMI as a FTP host. Is this possible? And if not, is there another way of doing this?  Thanks, Ibrahim
  15. Hi guys, I just starting to use Sysmac Studio. Its a bit confusing as I am currently used to CJ series PLC. Usually, we can use P_1sec, P_0_2s and so on to create a simple clock pulse timer function. However, I couldn't find the command or FB to do that in Sysmac Studio. Anybody could explain on how to do that in Sysmac? Thanks 
  16. OPC Client with CJ Series

    Hi everyone! I have an OPC UA Server running on a PC that I need my CJ2 to communicate with. I'm having a lot of trouble to find how I setup this PLC to work as a OPC UA Client. Does anyone have any idea of how to do it? Thanks in advanced! Best regards, Alex
  17. Hello to everyone! Our company is trying to make a quick disconnect for motors that connect tp servo amplifier R88ND-1S. As I know Omron doesn't have any options to do it or make an extension cable. Does anyone tried to cut the cable and make custom connector? If yes, could you share your experience? I'm afraid of having issue with encoder count. Thank you in advance! Scotty.
  18. hello expert i want ask some help So i tried to communicate my Omron PLC (cj2m cpu31) with SCADA from Schneider (power logic) on my omron side the comunnication on PLC already take to communication to NB so i add communication module CJ1W-SCU41-v1 I want asking how to open the communication if i want the scada become a master and my plc become slave i got this from omron website is that program compete for my case? i need configuration for scu41 module also to communicate or if you have suggestion i really open i just need to open port RS232c from scu41 so scada can read the data from my plc  tahnkyou for your help MRTU_CPU_Slave.zip
  19. Ok so I recently got the Factory i/o software to practice plc programming more in depth.  I got it working easily enough with the siemens TIA software and I am now trying to get it to work with the Omron Sysmac Studio software.  I am not sure if it is possible or not.  I have access to the hardware but I was really hoping to use the simulation like I can in TIA.  Any insight would be appreciated on the subject.
  20. My timer can run when i simulate on work online simulator pic
  21. Hello, One of my client have extruder machine, which is bought from china at least 10 years. Now one temperature control module is failed and we need to replace and re-configure it with new module. OEM is out of contact, and the PLC and HMI is protected with UM and task Read Password.   Is it possible to read or crack the Password ? (CPU Model CJ1M-CPU11) 
  22. Hi all is it possible to use the internal date of a plc in a function block without setting it as an input for the function block? for instance i have some logic to do something inbetween lets say 10:00 and 16:00 o'clock am i able to use those internals bits of the plc where the time is stored without inputting them to the function block and using them internally?   thanks
  23. LD-105CT - Change goal location

    Hello. I'm currently working on a LD-105CT.   Is it possible to change the location of the goal, when the robot failed going the specific goal? And is it possible to perform a new task when the robot received an error message/failed going to the goal? Ex: Pick up cart at location A, drives to location B(Location already has a cart in place) and then change goal to location C(which is available) and then release the cart at location C?
  24. Hello there, I am new to OMRON so need some help to communicate two PLC over FINS.   Here are the description of the system... (IO Table image is attached)   PLC1-  CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2-  CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX)     Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210.   I have tried RECV and ECHRD blocks but didn't succeed yet.   Two CPU are connected over ethernet via a industrial switch.   Can you help me to achieve data transmission please...
  25. setting date cp1l

    Hi all im currently using the DATE instruction to set the PLC's date and time via the HMI which is an NB7W which i have working but i am currently setting each byte of the words being used in DATE by using numerical inputs in NB designer and entering integer and decimal to set these bits in DATE and its a bit ugly to say the least. is there a way on nb designer to only modify bytes or am i going to have to used full words on nb designer and use MOVD in cx programmer to assign them to their correct byte CURRENT SETUP always on DATE using d50=d53