Search the Community

Showing results for tags 'omron nb-designer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 590 results

  1.   Hello, I want to regulate the temperature by a thermocouple type T with an OMRON control module TC001 / 2/3 and a CJ2M CPU14 series PLC using CX-Programmer as a programming environment. Could you provide me with an example project? Thank you for your help.
  2. Hello, I was hoping for some help in trying to read/write to a handful of bits in a CJ1M-CPU13 controller from a Compact GuardLogix. The CJ1M rack has a CJ1W-ETN21 card that is already communicating to a handful of Yaskawa drives. Is it possible for me to communicate with this controller from a CLX unit over ethernet? I don't believe an ETN21 card uses EIP but is there a way around this? Right now, I'm struggling to even find the IP address of the ETN21 card as the CX-Programmer file provided to me by the customer does not have the card in the IO configuration and I've never worked with Omron PLCs before. I found a CJ2M to CLX guide but it assumes communication over Ethernet IP and the ethernet port is native to the controller. Any help at all would be appreciated. Thanks!
  3. Grupa ProfAs Sp. z o. o. jest firmą doradczą, świadczącą usługi w szeroko rozumianej dziedzinie Human Resources. Specjalizujemy się w rekrutacjach na stanowiska specjalistyczne, średniego i wyższego szczebla. Wierzymy, że nasz Zespół złożony z profesjonalistów jest w stanie zapewnić perspektywiczne spojrzenie i najwyższą jakość wykonywanych usług. Aktualnie dla naszego Klienta - firmy z branży automatyki przemysłowej - poszukujemy osoby na stanowisko: Programista sterowników PLC Kraków / Piła / Poznań ZAKRES OBOWIĄZKÓW: Programowanie sterowników PLC Siemens Wykonywanie aplikacji dla systemów SCADA i HMI Dobór konfiguracji sprzętowych PLC Testowanie i uruchamianie maszyn u Klientów końcowych (delegacje krajowe i zagraniczne) Wykonywanie programistycznych prac serwisowych u obecnych Klientów Sporządzanie instrukcji obsługi maszyn   WYMAGANIA: Bardzo dobra znajomość sterowników PLC Siemens Umiejętność parametryzacji serwonapędów, falowników, etc. Znajomość paneli HMI oraz systemów SCADA Znajomość sprzętowa oraz programowa komunikacyjnych sieci przemysłowych ProfiBus, Profinet, Ethernet, DeviceNet, Modbus, etc. Znajomość zagadnień i komponentów automatyki (przetwornice, serwonapędy, obwody bezpieczeństwa, aparatura modułowa, itp) Mile widziana znajomość programowania innych sterowników: Allen-Bradley, Omron Prawo jazdy kat. B Komunikatywna znajomość języka angielskiego lub niemieckiego OFERUJEMY: Współpracę w oparciu o umowę o pracę Udział w profesjonalnych szkoleniach Korzystne warunki wynagrodzenia Rozwój w firmie z doświadczeniem na rynku międzynarodowym nr w rejestrze 14990 Osoby zainteresowane prosimy o przesyłanie CV na adres k.dominik@profas.com.pl lub kontakt telefoniczny pod nr tel. 881 700 778.
  4. The OPC Server for Omron Controllers

    Good day to all forum members. As you know, Omron controllers support FINS, the protocol of its own development. Despite the protocol is high-functional and well thought-out, few of SCADA systems support the protocol at the driver level, and therefore the main manner of connection of such controllers to SCADA systems is an OPC server. We want to offer participants to try our OPC server for the FINS protocol. Our OPC server supports the following standards: OPC DA 2.05, OPC HDA 1.2 and OPC UA (transfer of archives is supported too). The protocols FINS Ethernet and FINS Serial are supported, and this allows you to connect various modifications of Omron controllers, both with and without Ethernet cards. The OPC server contains the convenient utility of import from a file formed by CX-Programmer, and this simplifies configuring the server. There are the following modifications of the OPC server: - Demo version (full-featured, 1 hour continuous operation in the runtime mode) - Free version (32 tags at the most) You can download the trial version here: http://opc-server.com/catalog/mullti-protocol/opc_server_for_omron_controllers/ In addition to the OPC server for the FINS protocol, we also support such protocols as Modbus, Profinet, Bacnet, IEC 60870-5-104, IEC61850 and SNMP.   We would love to hear feedback and feature requests to our products.
  5. Puls train.

    I am using a cj1m with an OD203 output and other input and relay output cards.  I want to use this card to feed pulses to a servo motor.  I see from rise and fall times, the upper output limit of the OD203 is ~1 kHz or greater. That should be sufficient. Here is my example.  I adjust my servo to 1000 pulses per rev.  Using the OD203, I want to ramp up to 1 kHz on a signal. The servo is happily spinning at 1 Hz. On a signal change, I want to stop the servo at the next multiple of 1000 pulses within the ACC rate.  The motor may spin 10 revs and stop or 10000 pulses. Will the card I have work for this application? Can I do this independently with two channels? Thank you.
  6. Version 1.4.0

    37 downloads

    This is a custom template created for nb7w tw01b HMI. hope someone finds it useful. If you want to create custom templates for NB series hmi feel free to ask me. Cheers.
  7. View File Template for NB series hmi NB7W_TW01B This is a custom template created for nb7w tw01b HMI. hope someone finds it useful. If you want to create custom templates for NB series hmi feel free to ask me. Cheers. Submitter Aneesh Submitted 10/27/17 Category Other Omron Products
  8. Hello everyone. I have Omron CJ2M-31 PLC with SCU32 communication unit, and 34 3G3MX2 drives with repeater. I use "Easy to use Modbus RTU Master for CP1L CP1H CJ1 CJ2 CS1" written by our member PMCR (thank you PMCR for sharing your experience). I need to reed VFD status, reset fault, and write the speed. I tried the sample code version 2.12 with a single VFD, but in my test application it works inconsistent. I had got communication in the first place, I could control the drive, but I lost it after program modification and downloading (I did not touch communication part). I was able fix communication only once, and lost it again. I didn't find any correlation between my action and communication presence ( I tested dual port program version). If the communication is present, SCU unit blinks fast, otherwise slow. I have cleaned PLC memory and initialized PLC without any luck. Unfortunately, PMCR is offline. If anyone is proficient with mentioned above program, please advise where to look. Thank you in advance. 
  9. Omron IO adress

    Hi, I am new for Omron PLC. For now, I have a project using Omron CJ2M CPU35. I have no idea how to find where is IO address. Because there is no power for plc now, I cannot test. But I would like to know where are IOs Thank you so much
  10. Omron 3G3HV Problem

    Hello guys, I got a used Omron VFD from a friend. It was used in an industrial application. It works fine with the integrated panel. I would like to use it to run my drill press. I now try to control it by the so called 3 wire sequence (S1, S2, S3) for Start, Stop and forward/reverse. System does not work as expected, i. e. no reaction on the switches. I'm not sure if I have messed up the configuration of one of the n xxx parameters or if there is a HW problem. With SC open, there is no voltage at that pin (expecting 24Volts?!). Any thoughts? regards and thanks, Matthias   Current config: n001 = 4 n003 = 1 n004 = 0 n006 = F/R 052 = 0 n176 = rdy n177 = 1
  11. Version 1.0.0

    83 downloads

    E-Designer_for_E-series_English.pdf
  12. E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials
  13. Hello All,   I am would like to know how to send a bit from an excel file to an omron PLC through CX-server in order to confirm that I have communication and the excel file is open.   At the moment I am reading data from the PLC on the Excel file no problem but I don't know how to do it on the other way.   I am attaching the code I have written and the excel file. So the idea is having a cell with a 1 and reading this value as a bit ON on the PLC.   Thank you very much in advance I really  appreciate it. :)    
  14. Hello All,   I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file.   I am attaching the pictures of the messages and the code where debug send me.   Thank you very much in advance
  15. Hi, i am currently trying to integrate visual studio with advanced HMI tool box to an Omron PLC (cp1h). i am trying to use one of the communication option which is "OmronSerialFinsCom*". But I have no idea how to actually do it. can anybody help me with the setting of the "OmronSerialFinsCom*" properties and where should i download the USB driver for my PLC (cp1h). Thank you in advance.
  16. Hi Everyone! I try to read Analog Data in PLC Master through Salve Module (ECT-21) but i dont see any data, with an Digital Module i can read and write, but with analogic module i can't do anything. The analog module works perfect, i have 4-20ma Simulator and work fine. Modules: PLC: NJ501-1300 Slave: ECT-21 Analog: ADO81-V1 Can u help me? Regads..
  17. hmi omron

      Please give me hmi document of plc omron. tk
  18. FX5U With E-terminal

    I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas
  19. LADDER DIAGRAM UNDERSTANDING

    Hye, I new in this plc understanding. For now I have this one ladder diagram that created in mitsubishi GX Developer that I use in winding machine as its plant. But, I have to make the FUNCTION BLOCK DIAGRAM for this part in CX Programmer. Can anyone help me how to construct the FBD in CX Programmer from this ladder diagram understanding . And did it is actually the counter function ? *the picture showed the ladder diagram*
  20. CJ1W-TC102 Module Troubleshoots

    Hello Everyone. i'm in charge of a biodigester working with an old siemens plc, but today i recieved a cp1h-xa40dt-d with the CJ1W-TC102 temperature module. I need to migrate the programation of the siemens to the new one, but CX-Programmer isn´t so much familiar to me.  Basically, the old plc turns a mixer each 20, 30 and 45 minutes and i wanna make the same for the new one, adding a resistance for monitoring the temperature inside the digester. Do you have a program for me to check it out how it's done? I have the source code of siemens, idk i this could help.
  21. So just for anyone might interested, this past one year Omron had completely acquire Adept Robotics (California based robot manufacturer). The products acquired including all Delta Arms and SCARA (Quattro, Hornet, Cobra), also some Articulated / 6-axes robots (Viper), programmed with the ACE software. Other than that Adept also have Lynx AIV whose name is now changed to LD-Series. Aside from having an already established Robot Controller with by acquiring Adept, Omron also developing it's NJ CPU to control mechanical arms that can be user-built, with condition that it uses EtherCAT based Servo Control. The current version of NJ501-4XXX series PLC supports control over Delta Arms (3-axes + Rotation, 3-axes, 2-axes + Rotation, 2-axes), SCARA, and your usual Gantry XYZ+Rotation robot.   If anyone interest to discuss something about those do post here, or maybe create your own thread.
  22. Hi All, I have a requirement from a customer to acknowledge alarms from either of two  NS15 HMI's in the system. Can anyone provide info on how I may be able to acknowledge or delete alarms on one HMI which would also acknowledge or delete said alarm(s) on the second panel?  Both of the HMI's are polling one controller for alarm status so I assume that each time an alarm is acknowledged or deleted it would have to alert the controller which would then send something to the second HMI to clear the alarms? Any help is appreciated.
  23. Send text messages via Omron PLC

    Hello,I'm trying to use the CJ2W-CPU32, westermo MRD 315 to send messages in case of problems to the operators.Where should I configure the text messages, configure the phone number, etc? I need to configure a complete system.Thanks for the support,Regards,Hugo Tavares
  24. In Sysmac Studio, is there a way of addressing Array of for argument sake 100 INT. For ex: TEMP[array 0..99 of int]- AT %W0  If I do that will TEMP[1] be %W1 or I cannot address array. PS: I am currently using NJ501-1300 and Omron NB Screen. I am reading/writing total of 450 variable all comprise of either INT or WORD. I would like to group them together for easy access and keeping my variable table neat. Is there a better way of doing this. Any help is much appreciated.
  25. GP2401H to Omron CJ2H

    Hello All, I am trying to get an older GP2401H (Proface HMI) to communicate with a newer CJ2H (Omron PLC).   Everything I tried has failed.  I think my problem is on the PLC side.   Below are the details... ...Proface... GP2401H-TC41-24V GP-PRO/PB3 for Windows ...Omron PLC... CJ2H-CPU66-EIP   Need to use the serial port on the CJ2H because the GP is only serial (RS232).   Thanks for checking this out and please let me know what you think.