Search the Community

Showing results for tags 'omron modbus'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 539 results

  1. Hello,   Any one  have idea how to read and write variable for Schneider tm221 plc with Modbus function codes 3,6,16. I attached file for power supply communicator with registers, I need to adjust power supply from 25% up to 100. Please need help. Best regards,   Chyngyz   Modbus OPERATING INSTRUCTIONS.pdf
  2. CJ1M con CJ1W-EIP21 a ControlLogix

    Hello I am trying to communicate a CJ1M with a CJ1W-EIP21 Card, with a Logix Control, but I have not been successful, what I am looking for is to read data, from the OMRON and see it in the Logix Control, but I have not been able to establish communication, I am looking for someone You will already have a functional example, with the backups of both PLC'S, to be able to observe how they made the configuration. Thank you for your support Greetings
  3. CJ1W-EIP21 to ControlLogix

    Hello, Just made this account to get an answer hopefully quickly. I have an existing Omron CJ1M that is talking to a ControlLogix over a CJ1W-EIP21. I don't have experience in configuring Omron PLC's, but the Omron and Allen Bradley are already messaging to each other. My question is how can I get more words to be transferred between the two plc's? There are already 4 words (INTS) being transferred and are working properly but I have used up all the bits and am now needing at least 2 more words. I know in RSLogix 5000 I need to make the array size bigger, but where/how do I do that in CX-Designer? Thank you for any help.
  4. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  5. Hello all I am trying to figure out if its possible to save a screenshot of every screen on a HMI to usb at the same time, so i have currently created a button on a screen that saves the screenshot to external memory, is it possible to make it save a screenshot for every screen instead of just one? maybe i would have to create a kind of function on the plc that cycles through the pages and then takes a screenshot of each? any help would be appreciated currently using a NB7W and a CJ2 cpu 31 although it would be nice for this to work with everything
  6. I am trying to connect an Advantys RIO island with a STBNIC2212 ethernet/IP to a Omron CJ2 PLC. I need an EDS-file for the Omron Network Configurator but the Advantys Configuration Software will only export to .xsy for NIC2212 (Ethernet/IP), only way to get an EDS is to substitute the NIC with a NDN2212 (DeviceNet), but I doubt that will work in the Omron Network Configurator. There is an EDS file on the SE-website, but it seems to be a different setup than my island. I thought ethernet/IP should be easy :( Any suggestions? Geir
  7. Plants with many PLCs OMRON

    Hi colleagues, I would like to ask you about companies in whose plants have many OMRON PLCs, such as NISSAN. Thanks
  8. Hi all, I'm having an issue with EcoStructure Control Expert where when using DTM browser I try to connect but I get a message "No Ethernet/IP device at specified address...." My issue is that I had a device communicating using modbus but it has stopped and I cannot diagnosis the issue. I can ping the address and run a modbus poll from a PC on the network and everything performs correctly. Any help would be greatly appreciated. 
  9. cpu cpm1a

    please help me to unlock the password of plc cpu cpm1a
  10. Hello Guys, I would like to know if someone in here has made a VB script, there can delete files from the SD card in HMI? the reason why I ask, is I have some data logging on the HMI for our customer, but I would like the data logging to go in a loop so if the  SD-card is full, it will delete the oldest file instead of stop data logging. who is there somebody there can show me an example on a VB for this :)?
  11. Hi I am looking for a way to read and write data from PLC omron words, bits via FINS or EtherNet/IP protocol using python programming lang. Does anyone have any results in this? I really want to see your work, because all my attempts have failed. Thanks.
  12. NB HMI and CP1L-E PLC RTC Setup

    Hello,   How to SET the RTC of the CP1L-EM40 PLC Using NB7Q-TW01 HMI.   Is it any way to transfer the data of LW10000 to LW10005 (Which is RTC of HMI) to the Auxiliary area of PLC which stores the RTC of PLC ?
  13. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
  14. Need help in table scrolling

    Hi all, We have a DOP 107CV HMI we interface this HMI with microcontroller through RS485 Modbus protocol. I'm new to HMI and PLC's although we are successful in interfacing HMI with Controller(Communication Established successfully) We made a table in HMI and allotted some registers to Modbus address and data is transferred from controller to HMI up to this we are good in communicating Since the table created is static and we cannot scroll down from that table so, to overcome this problem we found History buffer and made PLC trigger and allotted address. In that History Buffer we created 7 rows and the data is sample whenever we triggered the PLC in that case scrolling is working fine, but the problem we are facing is whenever we update 3 rows out of 7 and triggered the PLC only 3 samples are updated in first column and in the next step we updated the other 4 rows and triggered the PLC the data is sampled on next column but we required it to be sample on first column instead of second.  
  15. Hello! I am working on a quote for a new project that will use EtherCAT but also requires DeviceNet for some legacy components.  Has anyone successfully used the Beckhoff EtherCAT coupler (EK1100) with the DeviceNet Master Terminal (EL6752) and an Omron PLC as the EtherCAT master? My concern is that the coupler will only communicate with the Beckhoff EtherCAT master, but since it is so much more expensive to get the new Omron parts to communicate DeviceNET i am hoping this could be an option.  The equipment is extremely simple and price is a major consideration.   Thank you!!!
  16. Delta plc Communication Issue

    Dear allI have DVP14SS211R series Delta PLC Which is having 24V DC supply voltage. I am using PLC as master and My end device as slave. My slave device set device_iD=1I am using Modbus RTU protocol for Function code1baud rate =9600parity =noneStop bit=1data length=8I would like to know how to send request with Function code 1(Read coil Register). i have attached code reference. Communication block it wont give error it shows 0 .means No error
  17. Good day everyone, I recently got NB HMI and program it together with my NX1P2 PLC. I got 2 questions I would like to ask. What I'm trying to achieve is to lock all the button after I start my system or during the pop up screen for confirmation. I tried different methods and it doesn't work. Currently I'm using a direct window Pop-Up screen to cover all the button behind it, but I noticed if I drag the pop up screen, it'll move together. So I wonder, is there any correct methods of doing it? Also, the function key for change screen, I use it for Pop up screen but why it only spawn on the top left of the screen instead of the center? Thanks in advance guys!
  18. Hello guys, I experience interesting behavior on NX102 PLC. I have an application with NX102-1200 v1.41 and 7 R88*-1S servos in total. All axes were added as a single-axis position. During servo set-up and tuning we periodically experience a communication error. Connection between laptop and PLC over ethernet. Did anybody have similar problem?  Error message #1: -MC Test Mode was interrupted in the controller. The MC test run is terminated. Error message #2 following error: -A communication error has occurred. 
  19. NB HMI via FTP

    Hi there! I got a NB with some daily data logs saved in a USB drive. The thing is, I've read about accessing NB via FTP and already tried connecting to the storage folder so I don't need to unplug and plug de USB drive every day. FTP is activated in the HMI but I'm struggling accessing using Windows' FTP function. Connection is okay, I can download the project to the NB from my seat and ping it. So here's my question, have you tried this type of connection? Is another software needed to properly access the HMI? Thanks in advance! 
  20. Hi there,  I am considerably new with setting up E/IP on OMRON's NX1P2 PLC. I have been trying to connect a Keyence IV-G to my PLC with E/IP connection (because there's no analog I/O available) and struggling with getting a connection going between PLC and camera. I connect these two through an unmanaged network switch, which I believe doesn't need any further configuration. I have set tags on Built-in E/IP inside SYSMAC Studio, and when I monitor them it says "normally resolved". Unfortunately, it still has red dot which means connection is cannot be established. The error I'm getting is "Tag data link connection timeout". Maybe built-in E/Ip just doesnt work for this case? I have yet to try getting connected with Network Configurator, but have the feeling that it will just accomplish the same thing that I did with Built-in E/IP inside Sysmac Studio.
  21. Hi,     I'm trying to communicate Omron CP1E unit with PC via serial port using hostlink protocol.  I need to read the Timer/Counter SV value and write the timer/counter SV values to the PLC.  I'm able to use other C mode commands (like RC (timer/counter PV read), WC (timer/counter PV write) etc.) but when I give the command for Timer/Counter SV Read 1 which is R#, I get the response as IC (Undefined Command).   How do I write or read the timer SV Values?  Example command and response : @00R#TIMH001028*  (TIMH is the high speed timer, 0010 is the timer number and 28 is the FCS) Response: @00IC4A* Is is that CP1E doesn't support these commands? If so what is the equivalent command that I should send inorder to perform this? Please help.  
  22. modbus rs232 communication error

    hi I am traying to connect 10 plc's FX3U to a scada system, on the plc's there are a rs232db and FX3U-232ADP-MB cards. i have devices transmit the rs232 by lan or any thing I need (rut955) my problem is when i download the program on plc same times the communication go right , but if i powering pls off then on the communication fail down. I initialized the plc  like photo https://drive.google.com/file/d/1Tr367wfVCRG6vvKcsOFyTKG_FExAsnVy/view can any one help me? sorry for my English
  23. NB Data log

    Hi there!  I need to implement a data logging that saves the log in a USB storage for a machine and just started searching for some info about data logging in NB HMIs. Up to now I'm clear about using the Data History function and the sampling method I'll be using but I still have some unclarified doubts about this. 1.- The data log should sample the value of, let's say, a couple of words, each second for an entire day (6:00 am to 6:00 am). NB's manual doesn't say a lot about Storage Type and Buffer Storage in "Save Data History" tab. Does "daily file" mean It deletes the .CSV file daily and it generates a new one? If is it, at what time does this occur? Does "single file" mean it generates a file and won't get deleted? Does this mean the sampling stops when completing the first one? Is "storage period" used to keep the file after the next log begins? 2.- Is it necessary to display the element in order to make the log work? Or can it be placed in a random screen you only enter once a day? 3.- In the "Channel Properties" tab. If I need to get the binary value of a word, do I need to set the max. limit to 65535? 4.- I asume that "Sample points" value doesn't matter when selecting Continue sample mode. Am I right? Thanks in advance, any help is appreciated.  
  24. Hello, I have a problem when communicating between PLC NX102 and ethercat slave module. ethercat slave still Safe-Operation state. and i get error  • Slave State Transition Failed • Slave AL Status Error Detected does anyone know how to deal with it?  
  25. Hello guys I am a beginner in FINS UDP communication and I am trying to do a FINS UDP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10   tcp socket (1).cxp