Search the Community

Showing results for tags 'omron keyence ethernet ip union'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 717 results

  1. Here is a step by step tutorial... Utilizing the CX Server DDE Manager will allow us to provide a link to the information in the Omron PLC. This link can be placed on an Excel spreadsheet. Charts, graphs, etc. can be made from the data. We will create links on an excel spread sheet from a CQM1H and a CP1L PLC. The information will then be displayed as a bar graph comparing the first ten memory areas. Here is a step by step tutorial... Watch on YouTube : Implementing the Omron CX Server DDE and Excel Let me know what you think. Regards, Garry

  2. QCPU to 2x kyence iv2

    sczot posted a topic in Mitsubishi

    Hello all, we are using Q03UDECPU and via built-in ethernet port its connected to two IV2-G30. (through unmanaged switch) to establish connection we are using FB LQnUDEEthActive (hereinafter referred to as  FBLQ) two instances of FBLQ in two instaces of our FB which is responsible for creating messages that are then send via FBLQ Both keyence devices have different IPs, ports and connection number. Problem is that it is working flawlessly, except the time its not working :/ from time to time it simply doesnt trigger Keyence device. It looks so far like its independt of turning machine OFF/ON, also both keyence devices are used in different times (about 10-20seconds of difference) Im currently working on sime kind of internal diagnosis to see whats happening when its not working, but im just curious if there is something obvious we are missing? any help will be apreciated Thanks  
  3. Hi. I have this project where we read out data from temp sensors and vaccuum stuff. We use Pfeiffer vaccum cpt 200 for the vaccuum, and we create a frame to send to the modbus unit to pull a value from example '306'. With all the current items we pull data, all the values are only updated every 5 seconds, is there a way to perhaps pull several frame/addresses in one request per device? Current codes we read, some are in sequence of each others, but more has a bit of gap like 00, 02, 306, 307, 398, 330 and so on.    

  4. C# - Compolet missing

    Stefan009 posted a topic in Other Omron Software

    Hi.  I have the CD with SYSMAC Gateway Runtime V1.6 and installed the full CD. I still cannot add a reference to Omron.Compolet in Visual Studio 2019. And the project i am trying to open, complains about OMRON.Compolet is missing. Any idea whats missing to get the OMRON.Compolet to show up in VS.Net 2019?
  5. Hai. now I trying to make a test, which is want to convert HEX ASCII character into binary. #3131 (HEX ASCII) -->> 11 (binary) but it's not working, it's still not converted and still #3131 in DM20. I could not find the mistakes. 
  6. Hello every one in this video, you will learn about AccumulationTimer in Omron Sysmac Studio. The AccumulationTimer instruction accumulates time during which the timer input In is TRUE. The time is set in nanoseconds. If reset Reset is FALSE, the timer starts when In changes to TRUE. Total time ET is incremented as time elapses. The timer stops when In changes to FALSE. The value of ET is held.  https://www.youtube.com/watch?v=KSSmApnKHR0  
  7. Dear all. I have the issued with Sysmac Studio 1.30. it can not show the Library setting and Library create. just show the reference only. can you pls help me this issued. Many thanks.
  8. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.

  9. Fatek Ethernet PLC Module online

    Yasir_66 posted a topic in Other PLCs

    Dear All,  Anybody can help me in communication between Fatek 20MAR2 & CBEH2A. The jumpers setting are JP1 is on left two pins (No password protected) & JP3 is on right two pins (forced boot operation mode). The Ethernet cable i used is type b T568. Fatek Ethernet module config software detecting module successfully (shown in attached pic) but on online PLC via ethernet cable its showing connection failed.   please help   thanks in advance
  10. Hi everyone, To explain the problem a little bit: I have 2 systems that are equal, they have 1 PLC, 1 Inverter and 1 Servo Axis (Image01). The devices are connected via EtherCat. The thing here is tht in these systems the PLC and Servo Axis is the same but the inverter is different. My goal is to have the same project on both systems and depending on the inverter detected use the correct program. What worked: If I add the 2 Inverters and 2 Servo Axis on the project on different nodes (Image02), I can detect which is present using the variable _EC_EntrySlavTb[n]. My issue is that if I want to make more replicas of the systems using different inverters I will eventually hit the Axis Number limit for the PLC while in reality I am only using on Servo Axis at a time. What I wanted: I would like to be able to control 1 Servo Axis with 2 different inverters (only one active per PLC) (Image03). What I tried: The axis parameters can be set using a variable of the type _sAXIS_PARAM, however it seems that the option to change the axis basic settings is not available (Manual: NJ/NX-series Motion Control Instructions Reference Manual (W508) page 5-58) (Image04). The axis basic settings is where the definition of the output device plus control words are set (Image05). Is there a work around to solve this issue? I would really like to avoid having to manually change the output device for the Servo Axis every time I make an update on all the systems.   Best Regards, BR  
  11. Hi All,  I am trying to limit the number of character for user to key in data edit . However, I put numbers inside it shows me invalid number of character. Anyone know how to solve it ? Note; My variable is in String Type   
  12.   Mail me for Help if anyone is stuck during coding and settings.
  13. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  14. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,

  15. How to use NB Data Logging

    Link068 posted a topic in Omron

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks
  16. hello Every one,    I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand.  I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000.    Can any one suggest me best way to do.  Thank you   attached file is for what I did in setting and program for the communication.      
  17. Good Afternoon, I am new to CX-Programmer so excuse this question.  I have written a FB in ST to trigger BOOL and Integer variables. Within the FB I have written ST with a case statement which is working correctly. The issue I am having is that It seems the integer variables in the FB (HMI_Q_FAN_STATUS) are not being passed to the assigned global variable (assigned to D register) on the output of the FB.  In the attached screen shot, the FB is in case 3 therefore the integer variable should display HMI_Q_FAN_STATUS=3, however is still displaying 0. Any help with this would be great. Thanks and have a good day.  
  18. Hi all, currently I'm using NX1P2 PLC for my project. So I'm just using it to transfer data from PLC to my PC but I faced 1 major problem right now which is the connection. I have few experience working on PLC but this time I faced an issue which I don't know how to solve it. So the problem here is, my NX1P2 can't connect stable to my my PLC, initially I thought it was the cable problem, after I changed several cable it's still the same, so I thought it was my ethernet port problem but I can connect it to the internet and also Delta PLC, at last I thought it was PLC problem so I connected it to my colleague PC, they got a stable connection and able to program it. My ethernet keep on displaying "Enabled > Identifying > Unplugged", I check my Ethernet port, it using Intel(R) Ethernet Connection (6) I219-V. Tried to solve it for few days already, anyone faced this problem before? 

  19. Monitouch HMI slow screen

    Robror posted a topic in HMI & SCADA

    Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!
  20. Hello everyone! I am quite new to communications between different brands of PLC's. As I have mentioned in the title, machine has a siemens s7-300 series pn/dp PLC with no CP modules (programmed in Simatic Manager). And they are adding an another machine with an OMRON NX102-9000 model PLC (Sysmac Studio). Siemens side also has PC connection over winCC flexible. Somehow i need to communicate between these two devices. Now, I have been looking into this for a while. There are mentions of sockets, but i have no prior experience with them. From what i ve researched omron has "Send" and "Rcv" blocks, but i cant find my way through on how to use them. For example, i dont know "where" to write in the siemens plc. I feel lost to be honest. Can anyone point me to the right direction? Sample program snippets, documents ?

  21. FX3U to FX3U via wifi

    waynes posted a topic in Mitsubishi

    Good day fellow PLC ninjas! I have a question/ concern which I would love your opinions on. We have 3 FX3U PLC’s+ENET cards. Two of the 3 PLC’s move around in an EMS trolley. The other is a ‘base station’ with a GOT2000 connected via Ethernet. Base PLC IP = 192.168.1.11 HMI IP = 192.168.1.31 Carrier 1 IP = 192.168.1.61 Carrier 2 IP = 192.168.1.62 I have programmed the base PLC to use Active communication; we are using fixed buffer communication to send and receive data to/ from the Carriers. The carriers are set up as Fullpassive ‘slaves’. This part works well and the update time changes (using a counter in the base station) from 1s to 100ms (because it enters a different work station).  My issue is the following: using a network sniffer (WireShark), I pick up plenty of re-transmits and sequence number errors coming from the base PLC’s ENET card. This is troublesome and causes delays when the update time is required to be fast (100ms). I am sending and receiving 10 words of data. The wifi seems stable, and there is minimal noise in the area. The power has been turned down and the antennas used are suited well for the application. The antennas are at a similar height to minimize possible loss of signal. I have LOS (line-of-sight) to the carriers at all times; to at least one of the antennas (I am using 802.11n). Has anyone picked up issues or found settings which can be used for comms over wifi? I can easily do this using a S7-1200 Siemens PLC and have done so using 12x S7-1200 clients and 2 AP’s with 1 base PLC. I have also successfully done this using 8xFX3U client with a System Q base PLC. My suspicion is that the delay in reading and writing to/ from the BFM in the ENET card is causing this. I am not sure that if I change to a FX5U will help. The communication cards on the Mitsubishi PLC’s seem very limited. Does anyone have any technical details on the access times between the CPU and communications cards’ BFM? Help is as always, appreciated.

  22. CP1L Unknown IP

    AndrejP posted a topic in Other Omron Software

    Hello. I have CP1L EM30 with unknown IP. I have tried to use "Direct Ethernet Connection" with "Network Browser" but with no success. I have manually set the ethernet IP4 address to 192.168.20.20 / 255.255.255.0 I've got error: "The OMRON Ethernet Direct Connection Manager service is starting in Safe Mode because Windows APIPA is enabled. (0x82020003)Omron.Cxmw.Modules.SystemLibrary.SysLibException" The PLC does NOT have default ip 192.168.250.1. What Can I do? Please help. Thanks. BR, Andrej.  
  23. Hi all, First i apologise for my english, but it's not my main language. I am very new at this world so sorry if my question is too newbie but i have been for several hours trying to get some data from an Omrom NPX1P2 DT-100 using Ethernet/IP and now i am a bit desperate. I am trying to connect this PLC using a C# Library provided by steffan rossman and it seems to be very easy,  i can manage to connect it but every try i do to request data it fails. As i can see there are several ways to get the data, for example: In this example the function GetAttributeSinglec(ClassID, instanceID, attributeID) i need the ClassID, wich i don't know what is, the instanceID, i think in my case is 100, and the attributeID wich i don't know what is or where to define. If someone could help me about how to request data it will be very appreciated. Thx in advance    
  24. Hello guys, I experience interesting behavior on NX102 PLC. I have an application with NX102-1200 v1.41 and 7 R88*-1S servos in total. All axes were added as a single-axis position. During servo set-up and tuning we periodically experience a communication error. Connection between laptop and PLC over ethernet. Did anybody have similar problem?  Error message #1: -MC Test Mode was interrupted in the controller. The MC test run is terminated. Error message #2 following error: -A communication error has occurred. 

  25. CP1L-EM40DT-D

    eln_keln posted a topic in CX-Programmer

    Hi there... I'm working on my final project using PLC CP1L-EM40DT-D. I want to set the stepper motor output pulse to match the 3 types of height I want. I used the PLS2 instruction but the simulation results showed the stepper motor rotation did not match the number of pulses and also the frequency I entered. Has anyone here ever used a stepper motor before? If yes, please help by sharing the exact pulse calculation formula on a stepper motor with a load. I really had a hard time finishing my final project because of this. I beg your help. Thank you