Search the Community

Showing results for tags 'omron keyence ethernet ip union'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 712 results

  1. Hello,  I am a newbie to the Omron world. We have a new machine come in made on Omron PLC, we are trying to get it connected to our OPC server so that the server can read and write tags via ther Ethernet/IP protocol. We have given out ethernet card 10.14.9.187 IP and the NJ501-1300 controller is on 192.168.250.1. But still our OPC server cannot see the tags/variables. I dunno if we have to add the ethernet communication card to the network configurator and add the tag sets ?  We are also getting a tag resolution error on sysmac studio while being online.    Thanks Pratik 
  2. Hi, can you help me how to make program indirect address for plc omron? I use PLC CP1E Thanks
  3. Hello,               So i am trying to use real numbers input from an Omron screen and compare them with a bank of numbers to enable a bit like a password. We currently use Mitsubishi and we have a memory bank we can store numbers and when a code is input on a screen the plc compares it to the entire bank with in the range we set. is there an easy way to do this other than putting a compare for every password we need?
  4. Importing Librarys

    Hey all,  i have one question for you, i am working on designing new hmi for one project in cx designer, how can i import more library and use it in my project .
  5. Connect SCU31 and NS5

    Hi everyone. I have a problem with adding SCU31 to my existing omron PLC CJ2M. I already modified my CJ2M PLC in IO table. I also already program my NS5. But NS5 didn't communicate with SCU31 and SD1 and RD1 indocator didn't blink. Can anyone help me? Is there any step that I missed? Thank you.
  6. HI  , I would like to ask you for your opinion    THIS IS MY PROBLEM WITH THE kinetix 6500  The equipment was working fine , but now i cant make to servo move with the program, cant run the test or autotuning    Status in front of servo drives say running. Everything is green, no errors,     when I activate the MSO  I can hear a click  at servodrive, but the servo is not energized, because i dont hear the usual noise when the servo is energized, I have check the cables and conectors, everythig is fines, I check the servo resistence , no shortcuts or open lines, The wierd part is when the servos are in the running state i can move by hand, they are supossed to be locked.     after that I activate the home MAH, or test or autotuning , or a direct command ,and then it  fails  When i try to jog . move, test or  autotuning  the servo it says s55 velocity error or excess positon error, i can not get servo to move at all I can see the position from the encoder back to the plc. I have turned the servo and i see the position at actualposition     Before the equipment was working , moving , I just swith it off one day, and the next day I couldnt make it move   Best regards    I have added the programm as an attachment k6500.ACD
  7. schneider somachine

    hello everyone,  Im new with schneider electic , ı m planing to work with Altivar 630 variable speed drivers and i want to control it with M241 plc in somachine . but when i want to configure in somachine i could not add the driver to my hardware. is there any document about it ? or does anybody control it like this ? 
  8. Gentlemen, I am beginner in field of PLCs and I need some help to create backup of project / program running on PLCs installed at our project. We have a  Quantum Hot Standby PLCs ( 140 CPU 67160) installed at our water treatment plant; we connect to PLC via ethernet (TCP/IP) and I am preparing backup of these installed PLCs as vendor did not give us backup project files and provided little useful documentation.  The problem is that, I have transferred the project from all of the PLCs using UnityPro XL, but for one PLC, when I connect to it the "transfer from PLC" option is not available. I am hoping if someone could help me with that.
  9. C200H-LK401 on CS1

    Hello, I want to ask if anyone have experience on this. So I want to mount C200H-LK401 combined with CS1 PLC. But the PC Link communication is meant to be done with another C200H PLC using C200H-LK401 also. Now the thing is, in CS1 PLC, LR Address Area is converted to CIO 1000 and so on. Will the PC Link still works to C200H? Like CIO 1000 from CS1 will be mapped to LR0 in the other C200H. Thanks in advance
  10. Version 1.0.0

    67 downloads

    Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function)
  11. FX3U-ENET-ADP User's Manual View File Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function) Submitter pigflying Submitted 01/19/17 Category Manuals, Tutorials
  12. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  13. Hi again I browse through half a dozen mitsubishi manuals but turn up nothing for mitsubishi plc cross-communication. In this project there are about six L-06 plc:s. All are on the same ethernet network already, communicating nicely with the SCADA system. Per today information is (temporarily) exchanged via the SCADA system. Here is another hole in my knowledge. Namely how to correctly setup communication between these plc:s. I plan to continuosly exchange some 50 bytes of information. I would be grateful for some pointers and/or perhaps a reference to a manual. Cheers to all of you //
  14. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard
  15. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  16. Hi.  When i activate adress H417.14 in the PLC i want the system adress LB9012 to be activated. Do I need to make a macro to do this? I have never used macro before, and I do not know how it works.  Please let me know if you have some solutions.  For the record I am an apprentice, and neither me or my co-workers have an sollution.   
  17. Hi. Can anyone help me on how to connect to OMRON cj2m with fins or ethernet/ip protocol from windows ? Is there any vb code or javascript ? I saw an omron fins javascript  topic from patrick  but i was not able to connect with the plc.  How many steps are needed to connect ? Thank you.    
  18. Looks like the NX-DA2603 can be configured to be 1-5V. Default is -10 to 10V. I cant find a way to change the range. Any ideas. Thanks,
  19. Choosing the right OMRON PLC - Vacuum System

    Hi All, I'm hoping someone can help me. We're currently in the very early stages of re-designing how our vacuum system works. Currently we have 6 vacuum pumps supplying around 8 different packaging machines which we currently have to turn on and off manually depending on the demand on the machines. The challenge is to design and implement a part or fully automated system to control the current vacuum pumps - The key requirements are Supply must equal demand for the vacuum pumps - so they are only used when neededAutomatic switch-off when not in useCycling the use of the vacuum pumps so as not to overuse oneAbility to take a pump out of the loop for service/breakdownsManual override/shut-offScope for expansionUser-friendly interface (possibly touch-screen/wireless)I am a complete novice when it comes to OMRON PLC work and would like some guidance on possibly similar projects or at least pointing in the right direction with which PLC to go for. Thanks for your time Jack
  20. Communication C# - OMRON PLC

    Hello community. I'm beginner in programming and PLCs. . I'm trying to make a C # connection to a PLC by RS 232 (software: CX-Programmer) OMRON. Since the added OCXs lying on the CX Server Lite (for example: axPLCSetup, axPLCError, axIOTable, and axPLCClock librarias), however, cant make the connection. Already googled a lot but can not find what I need. If anyone can help me with this problem, grateful.
  21. CX process Error

    Dear All, Hi my name is arum. I am just starting my own project using CS1W-LCB01 and Omron CS1G CPU42 H, and i am using CX process to program the LCB01. The first time i try the LCB, it was doing well, no error occurred. But now, I have some problems here. 1. Internal board error always appear 2.Error 0A0D was detect when i am try to download the program to LCB. Iam using CX server communication driver. Because the problem always occurred, I clear the PLC memory then download again the PLC  configuration, and then restart the PLC configuration every time this problem occured After some times, it doing well. 3. But now, I even cant download the program because there always communication timed out Anyone had experience with this case. Please give me some advise. Thank you in advanced.    
  22. I'm searching for supported EtherNet/IP CIP objects documentation for CJ2M. With Wireshark, I see unknown service 0x54. Thank you!  
  23. Videojet 1620

    Hi guys, currently working on the communication with videojet 1620 printer (Continuous Inkjet Marking), in there operators manual (http://www.videojet.com/content/dam/Countries/North%20America/Operator-Manuals/CIJ/1620-Operator-Manual.pdf)  the say : - How to Configure Ethernet Port Refer to WSI/ESI Communications Protocol addendum for more information. But cant find this addendum anywhere in the web, all i did found is this pdf attached "Videojet 1510 and 1210 Simple Communications Protocol". I'have try it with th eprinter using the Ethernet port and all i can find open is the FTP(21), 3000, 3001 and VNC(5900). An d i have send same packets from the WSI/ESI to the print via 3000 and 3001 with Packet Sender but the response was empty!! is there any one that know this protocol ESI/WSI or did work with this printer or simillar ?   i found this info in the FTP folder : <?xml version="1.0" encoding="utf-8"?> <CONTROLLER_INFORMATION>     <START_DATE date="07/09/2016"/>     <HARDWARE BoardType="CSB4"/>     <VERSIONS>         <WINDOWS_CE Eboot="4.0.3" CE_Image="2.0.9"/>         <SOFTWARE Type="Excel" Version="1.0.423.0" SVN_Build="28116M"/>     </VERSIONS> </CONTROLLER_INFORMATION> 180020947-Videojet-WSI-Protocol.pdf
  24. I have a compactLogix L24.  It is connected to a network switch.  I also have an ethernet servo driver (KM AKD) attached to the same switch. The CL L24 IP address is 192.168.150.1 The Servo Driver is 192.168.150.3 In RSLogix 5000, I added an ethernet module.  I put in the IP address for the servo driver.  When I go online, I just get a connection error (Code16#0204).   I can talk to the servo driver using my PC on the same network (192.168.150.13), but the CompactLogix won't talk to it.  Do I need to install an external ethernet module to make this work, or can I use the existing ethernet ports on the L24? I'm stumped.