Search the Community

Showing results for tags 'omron fins'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 409 results

  1. EEPROM Error

    Hello,I am Danneil. I had a problem with 1s EEPROM. I used the TWINCAT 3  online mode to control 1s Ready,JOG,MoveAbs all are ok. But I made a silly operation that I press the "update the EEPROM" function ,after that I can't control by TwinCAT3. Even I used the SysmacStudio ,there was an error 88 03 on 1s.  The ESI  files    From: https://www.fa.omron.co.jp/member/product/tool/23/esi/download.htm Is there a good way to solve?     Thank you!
  2. CP1L PLC network communication error

    Hello all,   I have a master PLC(CJ2M) which is communicating with slave 4 slave PLCs(CP1L). one of the PLC have communication error, upon checking in cx-intergrator it shows that all the other slave PLCs and other components are connected to network-1 and faulty PLC is connected to network-0. Unfortunately, I couldn't change it as cx-intergrator doesn't allow me to change download the changes. So anyone can please help me with this issue. If you know the troubleshooting way then please reply.    Thanks in advance.    -Yash
  3. Hey Guys,  So i am working with Omron software to integrate it with the HMI screen.  Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it,  the alarm does not go away from the screen,  it is acknowledged though.    Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ??   Please help guys !!!
  4. Hi All, I am totally new for sysmac studio and using NA5. Currently I am using standard recipe layout of NA5 I wish to search recipe by using keyword function.By using keyword, the target recipe is highlighted.  However, I cant find the variable of recipe that I can control.  Does anyone can help ?  
  5. INDIRECT REGISTER

    i want to use indirect register, but why contact 100,IR0 is not ON, is it my program correct?
  6. Hello All, Please Help Me.. How I can to connect Omron CP1L-M + CP1W-Cif11 with Mitsubishi Inverter D700? Thank you. Omron modbus belum fix.cxp
  7. So, I have thought about creating my own Business for the last few years. With this business I would go shop to shop/factory to factory teaching anywhere from Basic PLC programming to HMI design and integrations. I love to share any bit of my Knowledge/experience with anyone and I have learned this more when at my first engineering job they had me train several guys on how to start up Servo Motor jobs with PLC and HMI's. I really enjoyed helping others learn and get over the hump of intimidation and lack of experience with electronics and such. I have had a lot of different experience from being an Electrician for 5 years to Engineering 10+ years now- (Design, Software, Startups, Service work, Installs, and Management) I then started a career of being a PLC Instructor (part-time for 1 year now) for adults and this too help me with my idea of starting my business. At my instructing school we would get a variety of people anywhere from fresh out of High School to experienced Maintenance guys that want to specialize in PLC and HMI's.  With all of this being said, does anyone think there would be a great amount of need for someone to come your work place and teach Allen Bradley, Omron, and Mitsubishi PLC and HMI and maybe one day down the road Servo Motors and logic for them too? I think that more one on one with a couple trainer lab stations, I could really help not only workers advance themselves but also companies benefit both? I have gone to training for my previous employers, sometimes traveling far away for a week at a time and costing my employer a lot of money where my rate would be much less and on-site of the customer/trainee's. Starting out I have bought several used pieces of PLC's, Input Cards, Output Cards, (Only Allen Bradley for now). I have also bought cases to make my training units more safe and portable. Looking at creating a business name and logo as well as possibly creating a (LLC). It has been a slow but steady process though. Feel free to add anything or comment anything to this with ideas.   Thanks!
  8. hello,  Maybe somebody have macro script of omron vision system . The macro script must work that If I push button "Scene switch" then macro script must done "Data save" and then change scene. Or somebody can help me to create macro code?
  9. Omron PLC Python communication

    Hello All,    I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it.  I have attached the master PLC communication setup for the reference.    Any kind of lead/help is appreciated.    Thank you in advance.    -Yash
  10. Hallo, i want to connect PLC Omron CP1E to indicator weighing scale with modbusRTU connection and i have a CP1W-CIF11 module to connect indicator with CP1E. ,but I have no experience in RTU modbus communication in the PLC. How do i start?   *i just need output: 1. Coil (Reference No = 0. Output bits) for input switch with address 3 (Tare). 2.Input Status (Reference No = 1) for output lamp with address 17 (stable) 3.Input register (Reference No = 3) to read data with address 5 (gross weight) 4. holding register (Reference No = 4) to write comparison data with address 17(over) page 85 - 94 in attachment     ad4402_manual.pdf
  11. CJ1G-CPU42H BACKUP

    Hi,  I have CJ1G-CPU42H plc, when I try to backup the program it just fails at step 6 as indicated in the attachment, 6- plc memory  ##error aborted ##
  12. Not able to Ping PLC

    Hey All, I have run into an issue where my CJ2H-CPU64 EIP cannot communicate over EIP To the nodes connected. This machine in particular was running just fine previously. I have replaced all ethernet cables and the Hub as well.(8-port unmanged) I can ping all the nodes that are connected. But i cannot ping the PLC in question. I can connect directly to the PLC but not over ethernet.  So i changed the PLC out thinking it was a bad port but the problem is the same on the new plc. Any Ideas? Thanks in advance Richard
  13. CX-programmer IO list

    Hey. I have a PLC program I need to customized to a diffrent PLS (CP1L).  PLS ony support CX-programmer.  I miss the I/O list. Are there a easy workarund here, to find out the IO list ?    Best regards Wictor 
  14. We have a customer insisting on communicating with our NX102-9000 over EtherCAT, we have explained multiple times that EtherCAT is not intended as a facility communication protocol and recommended that instead they use Ethernet/IP, but after a year of pushing back they are still insisting and willing to pay for the Engineering work to get this to happen. Has anyone successfully configured two EtherCAT masters to communicate with each other? In the past I have used the PN-PN Master Coupler from Siemens to get two ProfiNet Masters to communicate with each other so I am hopeful that a similar device exists for EtherCAT, but I have not had any luck searching the web for such a device. Does anyone have experience with or know of such a device? Thank you!!
  15. Hello guys I am a beginner in FINS UDP communication and I am trying to do a FINS UDP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10   tcp socket (1).cxp
  16. OMRON CQM1-CIF02

    Hi! Does someone has a pinout and/or wiring diagram for an old  CQM1-CIF02 cable? Thanks!
  17. OMRON CQM1H-CPU21 Serial Connection

    Hello Sir / Ma'am,   How to connect Omron CQM1H-CPU21 (Image Attached) to the software for Configuration. I have tried it many times but I think I am missing something from the wiring side. Above mentioned Controller has a built-in Peripheral Port and an RS232 Port, We don't have that particular cable that connects the Controller to the Software via Peripheral Port. Kindly help me to connect the controller using the RS232 Convertor.   I am using ATC-810 RS232 to USB converter. (Image with all Pin Details attached) Software - Syswin or cx-programmer. (Upload failed, please use the below link of wetransfer.com to see images) https://we.tl/t-XmuqtUCYOk  
  18. Hello there, Today i have commissioned my first project with OMRON make PLC. Model: CP1L-EM40DT1D. (CX-Programmer) I have 2 built in 0-10V Analog Inputs on the plc. for analog input no-1 i get the digital value of 0-1000 in specific plc register address corresponding the 0-10V. (Factory setup) But today on site, i have noticed that some miner value of 0 to 50 is always coming and fluctuating very fast in that register, however the transmitter are genetaring 0.0V only (I have checked using digital multimeter with high precision) PLC and Transmitter are already grounded and all the cable connections are tight as well. so how to overcome this high fluctuating value ? is there any setting to filter the input ?
  19. Hello There, Hope you are safe and Healthy. I am using Omon "CP1L-EM40DT1D" PLC controller for a cut-to-length type of application. for the measurement of length, I am using an inbuilt high-speed counter 0.   Now the problem, when the status of PLC changes from Power off to Power On the high-speed counter starts from 0. How to hold the pulse value of HSC0 at power restart ?    (I am using Differential Rotary Encoder, not absolute)
  20. hello, I wrote simple omron vision system macro script with one scene variable sc.q&. The variable value is 5, but then I am executing macro code get value 0. I attahced photo. Maybe somebody know how to solve this problem?
  21. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  22. Can a CJ2M communicate to a C200H??

    Hello! I just got an interesting request from a customer, we have a product line that uses C200H PLCs.  The cabinets can operate independently or they can be connected to work in a Master/Slave configuration, the C200 PLCs communicate to each other over RS-232 using LR registers. Back in 2015 we redesigned to use CJ2M PLCs and changed the communication to EthernetIP. Now we have a customer who wants to buy a new slave for an old C200H system, so my question is what are my options for communicating to a C200 with a CJ PLC, I don't have much experience with the C200, that was programmed before my time here, in 2000 I think. Thank you!!!      
  23. Hello Everyone,   Make - OMRON HMI Model - NB7W-TW01B Software - NB Designer   Suppose I have more than one number input display on a screen of HMI. When I touch and enter the data in any one of them and press enter, the keyboard not closing automatically. in sted of auto close, the cursor moves to the next number input display to enter the data. How to auto-close the keyboard after entering the data in any number input display.
  24. Hi all,  I have a problem communication between Handy Scanner Honeywel (1902g) and Omron PLC CP1L-EM (CIF01).  1. Cable configuration for communication  2. How to set parameter  Thank you for your help.
  25. Dear All, Omron NQ HMI was installed with CJ1M CPU. Now I am trying to replace the HMI with weintek MT8071iP but HMI showing communication problem. I have omron HMI NQ program and set protocol settings as was set in NQ please see the attachment. Please suggest what may be the reason? waiting for reply Thanks Shoaib omron_settings.zip