Search the Community
Showing results for tags 'omron cj2m vb javascript fins ethernet/ip'.
Found 761 results
-
Hi there! I'm dealing with some ActiveX object issues in a CX-Supervisor SCADA project. The thing is that the computer where the runtime was running failed and was replaced. The project used a couple of dropdown list objects that worked in the older PC, but now everytime it access or calls the ActiveX object in some way, an error saying the object couldn't be found appears in the error register and the runtime stops working. I've been reading about Activex and Cx-Supervisor and I tried installing NI Measurement Studio, as it appears to be the software related to the objects in the project, but this didn't fix it. I see in the 'Csutomize Toolbox' window near activex objects, that there are plenty of options to choose, but I got no information about this window online. So my question here is: is there any 'standard' ActiveX object type that works on any PC, or am I missing something? Thanks in advance!
-
i am new to cp1h and have problems with getting analogs signals inn from input 200
-
Hello, I have a question about AlarmViewer in NA HMI panels. I found that I can't control what type of messages to show. I have a user information messages showed on one of the screens and I would liike to illuminate one of the events that cause the event to appear. I can't find how can I show raised or cleared user alarms only. It always shows me when it was raised and when it was cleared. In example when I have auto-clear (impulse of added condition into alarm event). Any solution how to create a log for events without showing raised/cleared/acknowledge? Thanks, Scotty
-
I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
-
I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
-
View File NJ/NX Get IP Address A Library containing a function Block that can be run on any Omron NJ or NX PLC. The Function Block will retrieve the host PLC's IP address, Subnet Mask, Gateway, and MAC Address. The Port Details are presented through 2 structures , 1 per-port. In the event the PLC only has one port the structure for Port 2 will be blank. Submitter photovoltaic Submitted 12/12/22 Category PLC Sample Code
-
Version 1.0.0
76 downloads
A Library containing a function Block that can be run on any Omron NJ or NX PLC. The Function Block will retrieve the host PLC's IP address, Subnet Mask, Gateway, and MAC Address. The Port Details are displayed through 2 structures , 1 per-port. In the event you only have 1 Ethernet port then the structure for the 2nd port will contain all 0s. Data Format: IP Address - USINT[4] Subnet - USINT[4] Gateway - USINT[4] MAC - BYTE[6] (hex value) Access the retrieved details by the typical parent-child tag structure. ex. Port_1_Detals.IP_Address[0] will get the first octet of Port 1's IP. Tested on: NX1P2, NX102, NX502, NX7, and NJ301 IMPORTANT: This Function Block should not be run immediately after startup. Allow the PLC a few seconds to establish a connection with the Ethernet network. -
Hi, I'm developing an application in C# and need to communicate with a plc omron NX1P2. How can i do it? With cx-compolet? Or is there another way?
-
Hi. what i've gathered, i need an EDS-file for the siemens s7-1200-system to be able to specify an ethernet connection in sysmac from the omron plc side to connect to the siemens ethernet/ip server. Anyone know where or how to get an EDS file for the siemens plc so i can import it into EIPprofiles in sysmac?
-
Is there an efficient tool to manage and validate CX-Programmer addressing. Requirements: - Highlight Duplicate Address allocation - Compact/Defrag address range to avoid wasting memory space. Note: - Any FINS addressing will have to be reconfigured - This approach assumes symbol use rather than direct addressing in the logic.
-
I have an application where I'm using GOT2000 to read data from the weighing unit using RS232 and I send this value to Omron CJ2M through Ethernet/IP. Some variables from that PLC are connected to the elements of the HMI. The problem is when writing the weight value to the PLC through script or Data Transfer is disabled, the RS232 reading works fine, it's fast, etc. However, when I enable the script which writes data to the PLC, the RS232 slows down by a lot, like it refreshes every 2-3 seconds. If i set the script to execute like every 1-2 seconds, it is working better (still slower compared to when the script is disabled) but I cannot leave it like this, because the weight is used to control some valves, pumps, etc. Enabling script doesn't slow down normal communication with PLC, because I tried to test it by displaying the value of seconds from PLC on the HMI and it refreshes every second. Does anyone have idea why such tiny script causes so many problems with RS232?
-
I'm trying to exchange some data between two controllers. I've used a manual which describes Tag Datalink communication. Everything works fine on the Bradley side, which means I can read values from Omron without problems. However, on the CJ it isn't working. In the Network Configurator I get error every 10 sec (Tag data ling error, code 03D5) and cannot read any data from AB. When I open Connection Structure Tree I see that the input tagset from AB has 'Broken path (0000000000000)' and Unknown Device right next to IP address. I've tried using EDS from the Rockwell as well as uploading it from AB PLC directly - I don't know if it might be EDS issue. The only thing I noticed that inside CJ2M-EIP21 EDS it says that Ethernet/IP is Class 1 connection, however in the 1769-L35E EDS Ethernet/IP is Class 2 connection. Have anyone ever had such a problem?
-
I am trying to use Reusable files, but it is greyed out. Is there a setting that needs to be enabled to activate it? I am using CX-Programmer v 9.74 Update 1: Apparently, when you create a data structure this gets greyed out
-
Hi all, I am trying to modify the date and time of several PLCs from other PLC. Them are all CJ2M, and they are all in the same ethernet network (192.168.100.xx) and in the same FINS network (#1). I am doing it using the FINS command 07 02 ("CLOCK WRITE") with the CMND2 instruction. It is not working entirely: the clock time is being modified at the specified node; however, I do not get the FINS response (expected 07 02 00 00). If I modify the number of retries of the CMND2, the command is repeated all the specified retries though the clock was already written on the first try. The D+0 and D+1 (response channels) are always #0; nevertheless, the I+1 ("Communication Completion Code" channel) allways receives #205. Acording to the manuals, this code is for "Response Timeout". I have tested it with 10 retries and with 10.0 seconds of monitoring response time, but it is working in the same way: the clock is modified fast enough, but I am not getting the FINS Response and the I+0.00 bit is ON after 100 seconds... I have been also doing tests with the OMRON's Etherway Software, sending the same FINS command, and here I am getting the response properly. (???) I would say the FINS network was set-up correctly. All the PLC were set in network #1 with Cx-Integrator. In fact, they are currently sharing several channels using the SEND command on this network #1. I don't know what I am not doing right... Any idea? The ladder is attached as .cxp and as .png. Thanks a lot. Best regards. CLOCK_WRITE.cxp
-
Array A INT[32] Array Index B INT Destination C INT I am trying to move an Array (A) Element (A[2]) using a symbol (B) in ladder into a destination symbol (C) C = A [ B ] Result: ERROR: Array Index of Operand 1 out of range at rung 1 ( 6, 0 ). The documentation suggests that it is possible, but I am unsure if there is something I am doing incorrectly. Note* Fixed indexing works with no errors Is there another method to accomplish this? PLC : CJ2M CPU31 CX- Programmer: Verion 9.74 Update 1: If I go online to the PLC It does look like the array look up is working. Is the issue with the mov block? Update 2: I changed the memory locations which has caused a different error to appear. This error is clearer but does not explain the manual excerpt I posted further up ERROR: Only the constant can be specified for the index of the array. at rung 5 ( 6, 0 ). Update 3: Solution 1 I managed to hack together a proof of concept using pointers and indirect offsets Update 4: Solution 2 For some strange reason things work as expected inside of the function blocks so I made one where the array is In-Out and with an input and output respectively. Note* External reference to pointers inside of the function block produced an error. Function block Logic Update 5: Solution 3 Now I feel like I am going crazy, I tried just the original code again and it works... I have no idea why and if it was not for all the documentation I would be lost as to why it works now... Update 6: Conclusion It seems to have array indexing work the array index must exist in the D Memory Block. The reason it did not work above is because I somehow had a MOVR block when I tested after moving all the variables to the D Memory Block. I hope this journey helps someone else :)
-
Has anyone have any experience getting a Wieland Safety plc (SP-COP1-ENI) communicate with an Omron Plc (NX102) via Ethernet/IP? EDS file installed, connection is set as per the documentation yet I cannot get it connected.
-
Hello I have a problem whit PLC mitsubishi FX3U thernet communication, we have a module FX3u-ENET-ADP. and we have the error "**03 Special Parameter Error".
-
Hello Everybody, I continued to work on project this morning but I seem to be plagued with the "PLC No Response" error. This error will only come up when I assign a PLC address to a particular object. I have followed the steps in the post(https://forums.mrplc.com/index.php?/topic/39885-nb-designer-hmi-plc-no-response-error-solved/) to try and clear the error but am having no luck. In the screenshot I have assigned the large "Start Process" as a bit button with the write address being W50.00. When the button is pressed it should trigger a bit in the PLC but this is when the error appears. During this test I am connected to the PLC and in run mode with the PLC and HMI address assigned correctly. I have read and followed the section in the manual regarding "PLC No Response" but still no positive results. I just want to check that there is nothing I have done at a programmer end that could cause these issues. I am happy to provide files. Thanks, Ryan
-
Has anyone connected a NB HMI to a CP1L-EM via ETHERNET NB = Node 2 IP 192.168.1.152 PLC = Node 1 IP 192.168.151 Using my Network Switch/HUB NB works fine when setup to com 1 on the PLC (Wrote the PRG using serial) NB says no response from PLC Is there a secret setting in the PLC i need ? ? Rob
-
Hello fellow tinkerers, Inside our company we're expanding our IoT network with the replacement of CJ1G-H to CJ2M CPU units. When swapping models we are downloading the Datamemories back into the CPU. Our engineer warned us to not download all the DM memories: only up to D20000, so I did. When starting we had some inputs that weren't showing in the Data trace: and noticed that it were pulses shorter than 8ms. We found out the "Unit settings" were back to default and this is not unusual since we only downloaded range D0-D20000 but I'd like to avoid this in the future and look up what each datamemory means. I know D30000 to D31599 are the memories for the CPU bus unit settings (manual W473 section 4-5) but what range is the "unit settings" within these 1600 datamemories? I can't seem to find it in any manual I look into (W473, W472).. Also do you see any problems with downloading the full datamemory range? Kind regards!
-
Control Powerflex 525 with NJ301 with Ethernet/IP
ragzz1995 posted a topic in NJ Series / Sysmac Studio
Hello All, I would like to control Powerflex 525 drive with Omron NJ301-1200 PLC via Ethernet/IP (Set speed, start, stop). I've gotten until the part where I downloaded the necessary .eds files of the drive and imported into my Sysmac studio. However, I'm stuck after this point while assigning target variables and Originator variables and eventually setting speed and controlling the vfd. I've attached images for your reference. -
Hi community, i need help .... I want to connect my HMI GOT 1455 to a PLC OMRON CP2MC by RS-232, but i cant do it. I'm using the following connection: HMI GOT1455 - PLC CPM2C (Interfaz CS1W-CN118) 2 (RX) - 2 (TX) 3 (TX) - 3 (RX) 5 (SG) - 9 (SG) - 4 (RTS) - 5 (CTS) * PIN 4 (RTS) IS CONNECTED WITH PIN 5 (CTS) In the HMI I configurated driver OMRON SYSMAC, CHANNEL 2 RS-232, TRANSMISSION SPEED 19.200, DATA BIT 7, STOP BIT 2, PARITY EVEN. But with all of that I can't connect both devices. In the PLC i can see the led COMM blinking, so it should have communication, but the HMI show me "Communication error. Refer to System Alarm in Utility Menu"
-
halo, i'm newbie in HMI and PLC. i have a problem connect HMI omron NB7W-TW00B TO PLC OMRON CP1E. i done setting same baudrate,data bit,parity check, and stop bit in HMI and PLC and i use nb designer for create a HMI display. and this is attachment: a cx programmer, bit switch and bit lamp in nb designer. and the output in hmi is [2]PLC No Response:00-00-1 can you help me? thanks
-
Hi, I'm trying to use send and receive function. I have to send 2 words from cpu CJ2M CPU33 to CJ1M CPU13. I use enthernet network. I saw a strange thing that if I just use send function then my data goes to second plc without having a receive function. Its that right? I didn't mentioned wich port because I'm not sure wich is. I left for automatic allocation.
-
Hi: Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC. Anyone ?
