Search the Community

Hi, i'm actually working on a project with a CPU33 CJ2M and a external analog output CJ1W-AD04U I'm trying to read the informations coming from a PT100 sensor and control a valve which act on the temperature. i'm kind of lost in this project because it's my "first time" with Omron ! Which function block must i use or how must i program this would you show me example ?  Thank you for the help guys.

Hi Here's a question I'm about to ask Omron.. as soon as I can figure out who to ask.. It's complicated asking support.. their web email form doesn't make complex questions easy. Here's the question: Can the NJ CPU program a LinMot linear motor to make the "Random Sea"? The NJ has a mixed protocol.. Ethernet/IP and EtherCAT (CoE),  and claims to be a "Motion Controller".    I doubt Motion Control is available on it's Ethernet/IP line.. but the EtherCAT might be another story.   Certainly The Omron NJ is a Motion Controller for Omron NJ series drives.. However, how well does it work with LinMot? Here's the curve.  Imagine a LinMot Linear motor continuously moving, never really stopping, following a real-time, mathematically generated curve, moving positive then negative, at random frequencies and random amplitudes. Almost never repeating a motion sequence. looks something like this: Yet, after a while the motion history fully represents the spectral distribution of energy on the surface of the ocean. Spectrum analyzers can display it, and mathematics can define it..  I just have to make that sea in a model scale…    (Time scales by the square root of the scale factor) And keep the water in the tank: https://www.youtube.com/watch?v=SQd6YzBWVvI The big question is: Can the Omron NJ get a LinMot Linear Motor to do this? … LinMot thinks YES.. but, isn’t sure. Yes there are ways to “connect" LinMot to The NJ.. EtherCAT (CoE), Ethernert/IP but… there is nothing in the LinMot drive that can create or store a predesigned Random Sea .. Only a Motion Controller, generating real time motion commands, by running  mathematical equations, "on the fly” can do that.   If the NJ is a true “Motion Controller”, and the LinMot C1250-DS-XC is implemented as an “axis” by Symac Studio, which it is…       Then, there may be hope. Closed loop, PID feedback remains with the LinMot drive, with special settings in LinMot Talk … Homing might have to be done with the NJ .. or by Digital I/O’s What do the Omron experts out there think?  Can this be done? Thanks much, Regards, Michael

Hi everyone. l have a project with omron plc but l dont know omron. l have CJ2M-CPU32 and CJ1W-TC002 also input and output units. do you have a example temperature control programme for this device ? 

We had to migrate over to a different domain and all of a sudden my Transaction Manager asking for a username and password and I have no clue what it is.  Any ideas on what could have caused this and why this is popping up?  

Does someone can help me. I try to make communication between omron CJ2M and CompactLogix 1769-L33ER. I found a document in this site to do the same with control logix but it doesnt work. The eds file does nt have the same parameters in Omron Network configurator. Does someone do this in this site ?   Thanks for the help

I have Omron CP1H PLC with Ethernet Option Board Installed on Slot 1. I want To communicate PLC to SCADA software through Kepserver OPC. But I am Not ABle to communicate with PLC on Kepserver OPC. Anyone Know Solution For This? Architecture is attached for more details.

I need to connect cx-simulator to Exor JMobile runtime, this runtime have ETH fins protocol to communicate with Omron PLCs. And with real PLC it's works. But I need to test programms with cx-simulator. And here I have problem. Googling and reading cx-simulator's documentation said me, that I need FinsGateway application. But it's old software. And Omron said that new is cx-compolet. But I can't find nor Finsgateway nor Cx-compolet. Does anyone have this programms? Or mayby knows how to connect cx-simulator with my Runtime. 

Hello, I want to do an interrupt with the HSC CT021 and i'm using the CJ2H PLC, but i can't find any documentation about how to do it. Can anyone help me with that if it is even possible? Thank's

Hi there, I would like to ask you regarding the conversion PLC. Usually, it is not a surprise for us to get the errors occurring for the PLC conversion especially if both PLCs are not in the same compatible programming software. What I mean, currently, we have a lot of older version of PLC such as C20, C40H, C60H etc and these version needed to be converted to the newer version. However, lately we have problem converting the CQM1H to CJ2M, whereas both PLCs using the same programming software, CX-ONE software (ver 9.6). Most of the errors are displayed like this: ERROR: Step at rung 161 (6, 1) - SBN not defined - 4 There are 4 errors are listed referring to the same type of errors, that is the SBN not defined.  Is there anyone here ever experienced this? And why is it these two PLCs also got problem for converting? Thanks all.

Hello, attached below is what i have attached above is what i have done so far for the ladder logic when controlling a pump stroke but i cant seem to get it to work  Im using an OMRON CP1LE-EL with CX programmer i use an analog extension board and its only capable for 1 analog device which is my pump  is there something wrong with my ladder logic? pls help    sorry if its lacking in information i'm new to this so just go ahead and ask me what u need to help me out           

Dear All, My friend has software disk rockwell original. I want install rockwell ori to my PC, and i have isntalled it again, but it can not work ( OS PC Win7 pro ) Any can help me ?  #how step install ? any some folder in disk : DriverExecutive, FTgateway, RS Emulate5000,  RSlinkEnterprise, RSlinklite, RSlogix, RS network   Thanks before edu

I'm making a plc interface tasks using vb serial communications, I used omron plc CPM2A and Visual Basic 2013 to control and monitor the plc, but I do not understand how to transfer to plc vb command, and the response from the plc to vb. please help me, I'm sorry if my english language is not good

Here's an article that compares the prices between FactoryTalk View and Ignition: http://blog.perfectabstractions.com/2017/03/13/ignition-versus-factorytalk-view-licensing-and-training-costs/

Please I need a little help with a CQM1 plc and a DA021 because I need to control a sysdrive 3G3EV with the DA021, i dont know exactly how configure too 4-20ma and what address send the data to be converted to Analog output, i see something about APR function but I dont see any practical example. In the application i have to change the speed of a motor from a hmi, I sink on a variable in the range from 0-100 and convert this too bdc and then send to the DA.

I. Developed new application   TCP_IP_Connection 1. App TCP_IP_Connection     applies the technology of IoT, Smart Home, Remote control.    It allows to carry out: - remote control and monitoring of control systems; - remote diagnostics of  the object; - turn on/off sensors and devices, including electrical circuits,   hydraulics, pneumatics, etc.; - transfer  information, files and images between smartphones and computers   implemented the application. For communication between the respective devices (smartphones or computers) are required only stable connection to the Internet  !!! The application is developed according to the technology MQTT and use free  Internet broker. As a broker use the HiveMQ broker. The application consists of   3 parts : - TCP_IP_connection.apk - works on the smartphone and is intended for control and      monitoring of equipments; - Server_Send_Receive.exe - the management server located  on the computer and   execution  action on the transfer of  information from the smartphone to the   controller and   back; - Server_controller.exe - located on the  same computer and execution tasks   of  controller. Communication is linked directly with the controller via Ethernet or     Ethernet/IP. As the controller for management purposesused controller family   OMRON (CS1,CJ1,CJ2,CP1H,CP1L...). Note. As a controller you can use the other type of controllers, for example, Yaskawa, Siemens, ABB and  other. They require rework program Server_controller.exe only to  interface of exchange with controller. So for Yaskawa controller family 2300Siec this interface already developed and used in industrial conditions. 2. The application includes the following controls: A. Smartphone – computer - controller. - modes  read/write of memory cells and  bits of the controller OMRON      (DM,W,EM,CIO,HR); - continuous cyclic polling of the memory areas; - the formation of Alarms in the event of errors of control system; - Display Gauges for 6 variables in real time; - Display Scopes for 6 variables in real time; - formation of statistical data on the operation of the equipment. B. Smartphone - computer. - sending  and receiving text  messages; - sending and receiving  picture image; - transfer photos from a smartphone;  - transfer images from built-in Web camera of the laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. С. Smartphone -smartphone / computer - computer. - sending and receiving text messages; - sending and receiving of picture image; - transfer photos from smartphone to smartphone (from computer to computer); - send the image with the built in webcam of a laptop to another laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. 3. Work application Server_Send_Receive.exe and Server_Controller.exe tested on computers running the Windows 7 operating system. Work application TCP_IP_Connection.apk was tested on smartphones Samsung, Phillips  running the operating system Android 5.0, Android 6.0. It requires the use of a smartphone with a display diagonal of 5 inches and more. 4. App TCP_IP_Connection.the apk  paid, the cost per user is $ 5 USA. Distributed through Google Play. The Internet address for downloading of  programs Server_Send_Receive.exe and Server_Controller.exe is on screen Help  application TCP_IP_Connection.apk.  OMRON_Communication has the manual in Russian and  English languages. The Internet address for downloading the full manual   https://yadi.sk/i/F_EJOQEd3G5sXc. Looking for partners for the execution of similar works.      

Hello, We have this SCADA system Vijeo Citect 7.2 running in Windows 7. Primarily used as generator's alarm history & monitoring. PLC: OMRON C200HG All communications are good but DIGITAL data (alarms, bustie) from OMRON is not updating in real-time. (Need to restart the Vijeo Citect to make it work).  While BCD & LONGBCD datatypes (voltage, speed current) are working good and showing real-time *OFSVIJEO: INT datatypes are also working good. Protocol UNITY         MODNET30 OMRON      OMRON OFSVIJEO  MODCELL  

Hi I am trying to test my application before transferring it to HMI. But All I see is question marks or Errors. I have checked RSLinx enterprise communication set up and its pointing to right controller. Is there something else I should check? Any help will be appreciated. Thanks

Hi everyone, recently we got a complain about UM password protection in the CP1L. So our user intended to apply password to a CP1L PLC which doesn't have battery installed. They were testing to turning off the PLC for about a week. In the 8th day, they turned it on again and tried to upload the program from the PLC. But after they input the password, and error shows up which indicates whether the password is wrong, or already inputted wrong 5 times in a row. Further checking shows that A99.12 memory was turned on which indicates that wrong password has been inputted 5 times. This was not the actual case since we make sure no one was using the PLC in those 7 days. A99.12 by its nature is not a non-retain memory. Is it possible that during Power On, the memory is unstable that it turned On by itself? I know it can be the case on some areas like DM / WR and also the RTC memory. And since A99.12 is a Read-Only memory, we cannot use P_First_Cycle to ensure it's turned Off as what we used to do with A500.12 (Inhibit Output). Currently I'm testing it by myself, for 3 days had left the PLC Powered Off. If anyone had inputs about this please advice. Thank you

Hello,  I am a newbie to the Omron world. We have a new machine come in made on Omron PLC, we are trying to get it connected to our OPC server so that the server can read and write tags via ther Ethernet/IP protocol. We have given out ethernet card 10.14.9.187 IP and the NJ501-1300 controller is on 192.168.250.1. But still our OPC server cannot see the tags/variables. I dunno if we have to add the ethernet communication card to the network configurator and add the tag sets ?  We are also getting a tag resolution error on sysmac studio while being online.    Thanks Pratik 

Hi, can you help me how to make program indirect address for plc omron? I use PLC CP1E Thanks

Hello,               So i am trying to use real numbers input from an Omron screen and compare them with a bank of numbers to enable a bit like a password. We currently use Mitsubishi and we have a memory bank we can store numbers and when a code is input on a screen the plc compares it to the entire bank with in the range we set. is there an easy way to do this other than putting a compare for every password we need?

Would someone please help me how to convert an integer to ascii?   For example if the output tag is an ascii string, of 3 characters and my numeric input is integer.   When user input a value of 5, I would like the input value to be convert and assign to output ascii string tag of "005".  How do I set the conversion format in either tag assignment or tag expression?

Hey all,  i have one question for you, i am working on designing new hmi for one project in cx designer, how can i import more library and use it in my project .

Hi everyone. I have a problem with adding SCU31 to my existing omron PLC CJ2M. I already modified my CJ2M PLC in IO table. I also already program my NS5. But NS5 didn't communicate with SCU31 and SD1 and RD1 indocator didn't blink. Can anyone help me? Is there any step that I missed? Thank you.

Hello, I want to ask if anyone have experience on this. So I want to mount C200H-LK401 combined with CS1 PLC. But the PC Link communication is meant to be done with another C200H PLC using C200H-LK401 also. Now the thing is, in CS1 PLC, LR Address Area is converted to CIO 1000 and so on. Will the PC Link still works to C200H? Like CIO 1000 from CS1 will be mapped to LR0 in the other C200H. Thanks in advance