Search the Community

Showing results for tags 'omrom cx designer siemens s7 and tia portal'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 344 results

  1. FX5U Link to WinCC RT Advanced

    Morne posted a topic in Mitsubishi

    Hi guys I am trying to connect a Mitsubishi FX5U PLC to a Siemens WinCC RT Advanced. I did find a document on the Siemens side on how to configure the HMI, but I can't seem to find any instructions on how to configure it on the Mitsubishi side. Any help, sample will be appreciated.   Kind Regards Morne

  2. NB-Designer comm status

    AndrejP posted a topic in Other Omron Software

    Hello. I can't find any related bits wich would indicate PLC offline / online status. I'm using two PLC's. PLC0 Modbus TCP (Ethernet) PLC1 Modbus RTU (Serial) Please help me to get online status. BR, Andrej. 
  3. Hello All, First time working with PLC. Get the hang of it from stuff I researched. Having an issue with an axis setup for a servo motor.  When I try to do an auto tune it gives me an error that axis is not configured.  Source: Config Fault    Condition: MotorDeviceCode- INvalid attribute      ACtion: Immediate Stop Fault Entry: Type 8, code 9 subcode: 1314 stopaction: 4 Statechange: 3   I was wondering what am I doing wrong? Any leads or source information I can use to solve this. 

  4. Siemens Simatic S7-1200 component selection

    the last water drinker posted a topic in Siemens

    Hi,  I am designing measurement devices and i intend to use Simatic S7-1200 as PLC for my new device. The problem is, my background is nothing close the electric and I am having quite a lot troubles when it comes to select components, I do not know how can I select components that are compatible with the PLC i am going to use.  Pressure sensor, humidity sensor shall be selected and which parameters I should be careful about? I read somewhere 24VDC supply voltage is needed. Is it needed even the device has digital output or is it for analog output only? How do I make sure about the communication interface? For some devices it says I2C, is that compatible with S7-1200? or do i need a special communication module for each component? Then it will be super expensive.  I would appreciate any answer. 

  5. NB screen freezing

    Bobodopalus posted a topic in Other Omron Software

    Hi all has anyone ever come across a NB series screen freezing when a screen change is attempted? i have a NB7W which when told to change to screen 58 or 59 via a function button or via a PLC instruction it freezes the HMI and it needs to be restarted. have i hit some screen limit or something? they only thing i can really think of it has too many graphics, it contains 6 bitmap images and about 12 graphic buttons/lamps

  6. Connection cable for Sinumerik810

    muzzamil.baig posted a topic in Siemens

    Hi, I am trying to connect my M2 pg with a Sunumerik 810 cnc.    does anyone have the part number or pin out of the 25 pin-25pin tty cable that’s needed for this.    thanks   

  7. Deleting Alarm Logs Wincc HMI

    michal34558 posted a topic in Siemens

    Hi, how can I get rid of those alarms with status I(O) ? They are simply something like duplicates and they re making it hard to read the logs.
  8. Hello, I need to make communication NB TW01B by Omron with Siemens's S7 1200 PLC using MODBUS TCP. I did everything like in this manual: https://www.myomron.com/index.php?action=kb&article=1566 I can read and write single bits from and to DB but I have problem with representation of float variable. In hmi_variable.png you can see my DB. Every BOOL variable communicate just fine the real ones doesnt. In NB - variables.png you can see how i added them into NB panel variable table. Settings.png shows settings of my INPUT number element on the frame( screen in NB). When I write on panel for example number 10.0 then from the panel view it looks properly but in PLC you can see value like in the 10.0.png. What am I doing wrong? Any suggest? hmi_variable.png NB - variables.png Settings.png 10.0.png
  9. is there a way of stacking screens in NB designer? ive asked question similar in the cx programmer forum but it might be better asked here. for instance if i have a program that displays an error screen when lets say the motor is overloaded but then the air pressure is also  cut off so that screen then pops up, we currently have a system that states when there are no errors to display the main screen with a DIFU command. however this system doesnt work very well if multiple problems occur it will only display the most recent one and when that is fixed the screen will not change. is there a way to make screens "overlap" and be able to close them individually or just any methods you have used that might be better at controlling the screen for this sort of application? thanks anyone who can help
  10. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  11. Hi guys, I installed new MachineExpert v1.2 and Vijeo 6.2.9 on Win10 machine. When connecting simulation PLC to Vijeo to test my application everything is good. I go to PLC and check the nodename (see the pic attached) which I put in my Vijeo application and everything works. Issue is, because of my hard drive capacity I am forced to work via VM (but this is my preffered way also because of number of PLC softwares used). When I installed from the same installer (everything same as my local Win10) on Win7 VM when I run simulation I get empty space where the PC simulator should be visible which nodename I should type in Vijeo. Also I noticed when going to gateway management console in VM the process is active, same parameters as in host machine. Turning off the gateway on the VM turns it off as well on the host. Is there a known problem of connecting to simulator on VM? Or win10? Unfortunately I don't have Win10 VM to try right now.. Anyone can help? Much appreciated!
  12. Hi all,  I am in the process of doing a project for some school work and need to do a SWOT analysis of the latest modular PLCs from Mitsubishi (R series), Siemens (S7-1500) and Allen Bradley (ControlLogix).  So I thought what better way than to ask the people on what they think are the pros and cons of each! Thanks for your responses in advance!

  13. STEP 7 MICOWIN DOWNLOAD

    Kiiza posted a topic in Siemens

    Hello everyone. I am looking for a link to download Microwin 4.0 sp7 or higher and not the update. Kindly advise me. Thank you.
  14. Hi all. I would like to get in contact with whoever can help me in my particular problem. I hold an HNC level in robot and plc programming but for different reasons I'm still trying to get on the industry but is being a hard task. It's been a while that I'm trying to get into some companies by agencies and they are always asking for something that I can't provide like two years experience. Basically I'm writing here trying to find someone that can help me in anyway. Currently I live in Shrewsbury and it will be complicated to get relocated but nothing is impossible if things are interesting for both sides. Thanks to all even for read it and just consider the possibility to help me on any way.   
  15. Dose anyone have experience with Beckhoff FC3121 profibus master PCIe card connected to Siemens CP342-5 as a profibus slave? The data retrieved from S7 PLC is wrong, and keeps fluctuating rapidly. TwinCAT (TC) config looks OK, and it reports that the slave is OK and has no error. The slave is in Run mode with green LEDs. S7 side is believed to be OK as another master from HMS-Anybus retrieved the data correctly. Tried several versions of TC up to the latest (at the moment) ver. 2.11.2305. Here is a zip file with two graph pics of the two masters showing how the "same" data looks like in each case: https://drive.google.com/file/d/1ijlx6AXA3FX8GqgJjwWlFMxPxqT4xN9F/view?usp=sharing Thanks, Hos
  16. I'm a Controls Engineer and have exclusively used Allen Bradley for 8 years. Outside of my job, I was asked by a new start up brewery if I could help with some PLC and HMI issues they are having.  I'm anxious to lend a hand, but unfortunately it's all Siemens and I don't have any experience with it.  I'm sure I'll be fine once I'm able to communication with the PLC, but the software and license are my concern. My biggest hurdle is determining what software I need and hopefully finding a free version I can use. The PLC is a Simatic S7-1200.  I found a link on Siemens for a free 21 day trial for TIA Portal and WinCC, but wanted to make sure that was my best option. If anyone could offer any advice, I would greatly appreciate it! 
  17. Looking for any and all new industrial surplus and even some used on a case by case basis. Anyone have any questions feel free to email me at contact@trojansupply.com We also have some great deals on any items we have instock we compete on price as we are a small entity. Same day shipping available. 
  18. Hello, can you help me with the following issue: I want to transfer the program/data from an old E1043 HMI to a new one. Tried with HMI Tools File transfer, the connection is established but after initialization and loading I am getting an "Error:Read directory failed." Connection made by serial cable-serial cable / serial cable-USB, result is the same in both cases. Is there something to check in order to make the transfer? Can I use E-designer for this purpose, and, if yes, how? Any suggestion could be helpful. Thanks in advance!
  19. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?

  20. TIA Portal V13- Alarm for Bool Data type

    Maulik Dudani posted a topic in Siemens

    IN TIA Portal V13 HMI Alarm Setup, Discrete Alarm Not allowing Bool Tags in "Tag Trigger". Please help how to set Bool Alarms?

  21. CX Designer Generic Popup Faceplate

    reece.oconnell1 posted a topic in CX-Designer

    I was wondering if anybody out there has ever made a generic popup to deal with multiple devices, similar to what you can do with factory talk and wonderware. I want to be able to index addresses from the PLC to the PT memory but it doesn't look like you are able to do this. Is there anybody out there that has come across this same problem?

  22. HMI NB designer Macro C programming

    romimumemo posted a topic in HMI & SCADA

    Hi there, is there anybody who use macro function in NB designer? I need list of C language syntax who can be applicable in macro. I have a task to migration from NP designer to NB designer who use different languages. Thank you

  23. Mitsubishi & Siemens OPC connection

    trobeshaft posted a topic in Mitsubishi

    Hi All,  I am undergoing a project that requires me to connect a siemens s7-1200 with a Mitsubishi FX-3GE PLC using OPC UA. I was under the impression that Kepserver ex could do this, you ca install a 'mitsubishi suite' and a 'siemens suite' which will allow the kepserverex server to choose the drivers and connect the two plcs. Siemen's support however have told me that the s7-1200 CPU cannot function as an OPC client, and just as a server? If true, I do not understand how to get the mitsubishi FX to be a client to the siemens server, as kepserverex seemed to provide a solution.   

  24. 50+ Thermistors on PLC

    Xander_M posted a topic in Automation Direct

    I am trying to build something (not for discussion) which involves using 50+ NTC resistors using a PLC to measure and do some other stuff. My question is, does anybody have an idea of how to deal with the high amount of individual NTC resistors? Of course, they need to be amplified and measured by the PLC directly or a device in between which converts it to digital. I have absolutely no idea in what way to connect the resistors to the PLC, does anybody have ideas? Let me know!
  25. Hi. I can get horizontal scroll, but no idea how to get vertical scroll if I have more events than event window has rows. thanks for clue