Search the Community
Showing results for tags 'nt3s-st124b-e'.
Found 2 results
Dear all, Does anyone have a NTXS verion 1.03? I can only find ver 1.04 in the internet. I am having a trouble while replacing NT3S-ST124B-E. The old one is using RS422 Communication. using a 5 cable in pin 1, 4,5,8, and 9. But it can not communicate after i download the old program I uploaded(firmware ver 1.03) to the new unit (firmware ver 1.04). it keep saying com 1 Communication Error. From the manual NTXS software, I discovered that the communication driver supposed to be downloaded together with the firmware. I used this cable RS-232 connection for programming (upload /download) and it works perfectly fine: db 9 Male (NT3S-ST124B-E) to db 9 female (PC) 2 to 2 3 to 3 5,9 jumper to 5 The program i managed to upload using NTXS 1.04 in Win 7 32 bit and sucessfully download to the new NT3S in Win XP 32 bit (tried so many times but it fails on Win 7 32 bit). The program says that the NT3S is connected to CJ1 PLC. The cable used to connect to the old NT3S is using Pin 1,4,5,8,9 which means it should be RS422 (Xtra Drive). I wanted to try using version 1.03 but I can not find it. Regards, Budianto Scanner NT3S.pzm
Hi, In my project, im tring to send a command from the hmi to the plc, truew the cable RS232 using the foloing conections: NT3S PLC 2 -----3 3------2 5------9 _4 |_5 But i dont know how the cp1l will read the comand sent by the HMI, i tried to use the HELP in the CX-PROGRAMMER but i stil didnt understand how they communicate. I already know that they communicate using the memory DM, and that the HMI works with ASCII communicacion.