Search the Community
Showing results for tags 'nt 21 cp1l-em nt support tool'.
Found 104 results
-
Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
-
Hi, I have some code and the PLC scan is quite long 55ms. I have also defined CTBL function with HSC 0 and when the value is reached program (Interrupt TASK 04) is executed - just SET output 100.01 (electrovalve for cutting) . My question is if when I have so long PLC scan, timing for OUTPUT 100.01 is always the same - immediately when Interrupt TASK 04 is executed or is ON after scan is done and then cutting moment is different. If timing can be different how to force OUTPUT 100.01 from Interrupt TASK 04 not after PLC scan is done
-
Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download. So I am stuck now. Can anyone help point me in the right directon? Any Help greatly appreceiated. Thanks in advance.
-
From @SamuelT Please, I want to know if you know how to communicate two plcs omron CP1H (master) and one CP1L (slave). The master CP1H will send 10 DM memories to slave CP1L. Now I have this configuration: CP1H MASTER PORT: CP1W-MODTCP61 MASTER IP: 10.150.1.5 SLOCK: 1, DIP SWITCH PLC # 4 = OFF CP1L SLAVE PORT: CP1W-MODTCP61 SLAVE IP: 10.150.1.1 SLOCK: 1, DIP SWITCH PLC # 4 = ON I use the modbus RTU function blocks, but the master PLC does not communicate or send the DM memory values to the slave PLC Thank you very much for your reply if you have any example program it helps me a lot MRTU_CP1L SLAVE.cxp MTCP CP1H_MASTER.cxp
-
Greetings, My application is utilizing two Omron CP1L PLCs connected through an RS232 serial link to achieve PC Link. We're essentially using this setup to message data between the two PLCs. With a hard-wired link, it works great. I can force bits in the master PLC, and see them in the slave PLC. However our application requires this link to be wireless. We got our hands on two SENA Parani SD1000 units. I've worked with these units previously to connect a serial scanner to a Rockwell PLC quite successfully. After reading through datasheets, we figured out the pin-out from Serial Comms unit fitted to the CP1Ls wasn't quite standard. So we adapted our own cables to re-route VCC and SG appropriately. So with a hard-wired link, this setup works, and the comms units on the PLCs have a nice solid lit up comms light. But with the wireless parani connection, the comms light lights up, but it is very dull compared to the wired link, and we get no data transfer. I've verified to the best of my understanding that the comm settings all match, at 9600 Baud, 8 data bits, 1 stop bit, and Even parity. Just curious if anyone has any suggestions to get this working, or if there are any settings that I might have missed that make PC Link a unique form of RS232 that these parani units can't handle? I've identified online alternative units known as the Promi SD205-OA, which has a pin-out to match the OMRON CP1L PLCs. As far as I can tell though, the units themselves function the same as the Parani SD1000 besides this pin out. Anyone know differently? Presently the serial connections made are Tx -> Rx, Rx -> Tx, Vcc -> Vcc, and SG -> SG. Would I require anymore connections? Our wired link seems to work just fine with just those connections. Any help would be greatly Appreciated!!
-
CompactLogix E/IP to Kuka KRC 4
Ricardo Vargas posted a topic in Allen Bradley / Rockwell Automation
Hello everyone, I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ? -
-
[PLC Sample Code] - CP1L-EL/EM Option Board Configuration
MPOLITIS posted a topic in Download Comments
CP1L-EL/EM Option Board Configuration View File FB for Option Boards in CP1L-EL/EM -Configuration of the option board left-right -Scaling Selection -Analog Input and Analog Output Conf. -Tested in CP1L-EM30 Submitter MPOLITIS Submitted 07/22/19 Category PLC Sample Code -
Hi, I have encoder and count pulses in mode "Differential Phase Input" - Linear mode Every one turn I have Z-phase reset and counter starts from 0 I set some target value comparison table from D1000 for @CTBL #0000 #0000 D1000 and it works just one to reach target value After PLC start and HSC reach target value for Interrupt 01 I get subroutine working, but even I reset HSC using Z-phase signal and PV goes to 0 still interrupt is activated. I would like to start and stop interrupt during one turn of encoder and make it every one turn Thanks for clue
-
Hi guys, I was programming my CP1L-E over ethernet with no issues at all. I did get an error when uploading my program regarding cycle time, so I went into PLC->Settings->Timings and changed both values to maximum (4000*10ms watch cycle time and 32000ms constant cycle time). Once I restarted the plc it just wouldn't connect. I've tried option cards CP1W-DAM01, CP1W-CIF41, CP1W-EIP21 and i just cannot get comms with the PLC. I can see the CP1W-EIP21 card on my computer, however,, in its own IP address. From what ive figured, the plc is getting stuck somewhere in its boot cycle as I am unable to ping it either. The POWER and RUN lights are both green, and the LNK/ACT light flashes when i connect an ethernet cable to the inbuilt ethernet port. Any help is appreciated, thank you! Any way to factory reset the whole plc or even just the settings? I've disconnected the battery for 30 minutes before plugging it back in aswell but that did not help me.
-
How to conduct a Change or a reset of Gmail Password?
Miley272 posted a topic in Computer Help and Networking
In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK -
Overcoming 'STRING type or an Input Output variable is not supported'
viman posted a topic in CX-Programmer
I get the input of an encoder and do operations based on that, for at least twenty object 'slots' at once. Program is on ladder since client needs to be able to modify it at will, but I'm using structured text functions to handle all the messy operations, since every object has properties and data, and up to twenty can be running in real time. This is a CP1L. Instead of instancing those function blocks twenty times each, I keep a single instance of them one running all the time, and output TRUE when one of those objects raises a valid comparison. In essence those FBs compare each objects' relative position to the encoder against defined points. The picture is an example of the functionality I'm needing. When one object completes the FB task, one of its flags turns ON so that it can't be used anymore. The issue is that without an input/output ST variable, this flag stays ON no matter what, and I need to reset it from outside so the cycle can begin again. The inner FB bit linked to this output stays ON since nothing inside of it makes it change. That's why I need an input/output variable. In the picture the timer would reset the bit - until the FB turns it on again - but I can't do this in this controller. Is there an elegant way to make this work? I know I could use the rising edge of the output to turn some other bit ON but that's the kind of thing I want to avoid. -
Hi guys, I am trying to make a controller for an oven using MODBUS with a CP1L and an NB screen. My oven program will have 10 stages in one baking cycle, and the parameters for each stage can be modified individually (temperature, blower speed and time). I have set my number input in the NB screen to be a unsigned int of 2 integers and 2 decimals, and it writes to H4 in plc H memory. I move this value from H4 to W4 in the PLC, and input W4 into a timer (T0000). I have tried data manipulation and still have no success in getting this to work properly. My CP1L timer is set to BCD mode, as I am using premade MODBUS function blocks which are programmed with timers in BCD mode. Does anyone have any pointers regarding this? In the screenshot provided, the number i inputed in the HMI was 60.00.
-
Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
-
hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
-
Hello all, I have a problem with PLC at work. I am working on historical code with a view to upgrading it for a roll out program to all site based PLCs. The code is to be downloaded using memory cassettes, and there is data on the PLC's which needs to be retained. I have re-worked the code and it performs as I would expect as per the following: 1) I download original code (V2.01) to PLC using CX1 2) The PLC simulates a cycle and various values are stored (the key variables are Installation Date and Service Due date). 3) I then download my code to the PLC and the variables have been retained. All so good so far. The problem is that the factory production line uses PLC code saved using the PLC Backup Tool. When I download the original code to the PLC using this tool, I encounter various issues, but the main one is to do with real time PLC clock values. When I download the code direct from CX one developer, I use the MOVD(083) instruction on A352 through four to give me a variable with the date, month and year. This morning (29/01/2019) the BCD values read as 41, 1 and 25, which translates to 29 (0010 1001), 1 and 19 (0001 1001). When I download the backed up code using the PLC Backup tool, the values are totally different. I have run the backup files for both codes through a comparison program and there are no differences between them at all....... Can any one advise if they have experienced this before?? Thanks.
-
First time using Connected Components Workbench and am modifying an existing program, does anyone know why and how the original IO_EM_DI_ numbers have been changed and not just the alias'. When I right click and select properties for each tag it gives the address and says 'Read only cell' generated by the I/O wiring tool indicating the I/O channel to which the variable is wired' Any help would be great thanks!
-
hello. I've been trying to communicate this omron plc CP1L-EM30DT1-D, with a yaskawa inverter cimr-vu4a0004faa. but i can't figure out how to make de correct mov or configuration in de DM. i need to run/stop, change frequency. some help, please. :) 485PRUEBA.cxp 485PRUEBA.opt
-
Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi, a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
-
Hı guys, I will design new project but I dont know that how can ı use FB at the attachmend files ı wanna send speed referances for 23 motors with rs 485 I will not use start and stop function for ınverters with modbus ıt will be doing probably only speeds of the motors 1 ) Plc CP1EN40S DT1D 2) hmı : nb7 twb0 3 ınverter s : V1000 VZABOP4BAA how can ı use registers numbers of the ınverters so ı need simple program thanks for everythings [767]InverterRefresh.zip
-
I using easymodbus library to connect and read data from 3 PLCs CP1L but it run unstablely, sometime it disconnect and i cant re-connect PLC, it give error time out when i try to reconnect when it happen, i restart PLC and everything back to work. Someone please help me. I am new with modbus and omron
-
I need to add 3 encoders to my project. Currently my PLC Inputs are full. I am using high speed counters 0.00 and 0.001 to monitor a motor RPM with an encoder. I now wish to add 3 encoders to monitor position of (3) other linear axis controlled by stand alone (Zeta 6104) stepper drives. I have 3 open outputs on this PLC but all inputs are used. What are my hardware options to add additional encoders to allow me to track and correct the 3 additional axis. My first thought was to add another CP1L and use PLC1 0.00, 001 for ENC1, PLC1 0.002, 0.003 for ENC2, PLC2 0.00, 001 for ENC3, PLC2 0.002, 0.003 for ENC4. I thought this would allow me to use additional I/O from the second PLC but I am not sure if this is even possible. Is it possible to connect 2 PLCs this way? I will need additional I/O to send to these stepper drives to make the corrections. Do I need to add an expansion unit to the existing PLC and 2 additional high speed counter modules? The encoders are all Omron E6C2-CWZ6C. I would appreciate any advise on options to add these encoders and help point me in the right direction. Thanks in advance to any help.
-
CP1L connected with scanner symbol, with RS-232 on board CP1W-CIF01
FranciscoMYT posted a topic in CX-Programmer
CP1L connected with scanner symbol DS-4308 reading 2D data matrix, with RS-232 on board CP1W-CIF01 Hi all, need some help because I can't read the information. Let me explain, I have a PLC, " CP1L-L14DR-D " with a RS-232 option borad " CP1W-CIF01 " , a scanner Symbol DS-4308, and I'm trying to read a data matrix 2d barcode (I don't know if that matters). so I build a cable with the next configuration, (one side male and the other female) PORT CONFIG PIN OUT SCANNER CABLE RJ-50 TO RS-232 PINOUT Maybe I'm missing a connection? a bridge? power supply ? ground? in the program, I only have this to check the communication, When my reception flag complete (A392.06), my instruction RXD is going to execcute, reading in D1500 the data. if is any error in communication (A392.04) or overflow (A392.07), my port is going to restart (A526.00) (ignore w0.03) with the followign config: (9600, 7,2,E, RS-232C, End code: Received Bytes 3 and I'm reading only, data on D1500 and D1501, and the data makes no sense. with the configuration of End Code: CR, LF, can't make it work, I read nothing. and if I change the END CODE: Received bytes to 4, don't work. and my flag A392.04 go to ON. PLC HAS 4 PIN SWITCH, ALL ARE OFF The configuration on the scanner is setting to default and then config to RS-232 Standard. So, what I'm missing? bad connections? plc don't support? scanner config? program? -
I have 6 PLCs CPM2A and 4 PLCs CP1LM I'm going to network them to do the supervision and data acquisition from each PLC and connects them to a pc via an ethernet port So what are the hardware and software used?
-
Hello I need to sent data between PLC CP1L-M30 and Hyberterminal with serial port (RS232C port 1) ,but there isn't data show up . something is wrong? Could you advise me? my ladder as below
