Search the Community
Showing results for tags 'ns10'.
Found 3 results
Hello, I would like to download my project to the NS10 -v2 but i get the following error: I kind of remember that it was p;ossible to update this automaticaly in similar cases, like 8.7->>8.8 or something like that, i just clicked on okay and it did it automatically. But after ok the application just stucks on loading, NS restarts, in case of ethernet. I tried it with usb, it just quits after ok, and nothing happens. How can i upgrade the NS10 to 8.8 or 8.7 or 8.9 to be able to download my new project??
Hello, We recently got a machine with two NS10's. They both connect to the same CJ2H PLC and most of the elements are set using tags. Everything works but the refresh rate when changing screens is really slow. The changed screen displays but it take around 5 - 10 seconds (something like that) before the bit lamps light up and the alarm messages are displayed. Does anyone know what may be causing this? Is it because we have a large number of tags? The NS10's communicate over Ethernet and we have 60 EIP nodes in the machine taking to the PLC at the same time. Perhaps this is the reason? Thanks.
Hello, recently I tried to hook up a new CJ2M-CPU31 (built-in EIP Port) with a NS10-TV01-V2, which has an Ethernet/IP connection also. I made the simple setting as usual : 1. PLC, IP Address 192.168.250.1, Sub 255.255.255.0, FINS Node 1, no change to FINS/UDP parameter (Auto Dynamic Generation) 2. HMI, IP Address 192.168.250.2, Sub 255.255.255.0, FINS Node 2, Register the Host as EIP, SYSMAC-CJ2 mode with the PLC IP, Disables the Serial Port For some reason, there is no communication between NS and CJ2M (timeout error always occurs). I tried to re-register the Host as FINS, set the Node to 1, and also with no avail. I did try to connect the NS to a CP1L-EM with FINS Comm. and it works fine. Anything I did miss? Thanks in advance