Search the Community

Showing results for tags 'ns-runtime'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 14 results

  1. Hello, I'm currently researching Rockwell controllers for our PLC implementation, but there are some aspects I couldn't find in the manuals.  I would greatly appreciate it if you could provide more details on the following: ①Procedure for Adding Modules Online: In the manual "1756-um001p-en-p," it mentions the possibility of adding units online.  However, I couldn't find specific instructions on how to do this.  For instance, with I/O modules, I assume it's as simple as physically attaching them to the chassis using RIUP,  but I'm unsure about the software side (e.g., Logix5000) and any operations required on the controller itself. ②Online Module Addition for Remote I/O: The manual mentions that EtherNet/IP modules can be added online. Would it be possible in either of the following scenarios?  ②-1 Adding I/O modules to the chassis of an existing remote I/O station.  ②-2 Creating a new remote station. Our investigation has hit a roadblock, and we're in quite a quandary.  If you have any information on these matters, your guidance would be greatly appreciated. Thank you.
  2. Passwords in Runtime

    Hi I'm looking for a little bit of help. I have a WinCC HMI which will not let me log on with one of the passwords. The general logon and admin both work fine. The Engineer password doesn't work (no display at the top of the screen where the other user names are displayed). There is no warning that the password is in correct or the account locked out (missed in the original programing I think). I have all the project files however I'm using a runtime licence. I would like to log in as admin open the project and clear the password lockout. The issue I have is that I have to use TIA portal and it will not show the project file, is this due to the fact that I have a runtime licence. Is there another way to see if the user name is locked and removed. Like I said I have the admin password which works.   Thanks in advance for any help you can provide. Kind Regards
  3. Hi All I uploaded an run time application from an Panel View Plus and stored it on my laptop. When using the application manager to restore the runtime onto my pc so that I can edit I got an error that says a newer version of Active X is required. Not sure if my software is to old or if it is my operator system windows 10   Any help is appreciated Thank you
  4. Excuse me , can anyone help me .. I made Graphic program with CX Designer-NSRuntime. But I'm having trouble making auto save/downloads my graphic. Because  in NSRuntime Graphics there is no auto save command. Please check my screenshoot
  5. CX-supervisor

    I want to send data from internet to cx-supervisor via cx-supervisor website but error. i don't know how to resolve this problem .I attach photo below, people help me with
  6. hi guys, i want to ask about cx supervisor development 3.0. i have problem with my cx supervisor. my cx-supervisor cant run, but can built succesfully. my cx supervisor 3.0 development version, my cx supervisor problem like this. do you have solution ?thx for attention,sorry for bad english best regards
  7. Track NS series IP addresses

    I am using the NS series touch screens and NS-Runtime. Do they have a System word that stores the IP address of that touch screen or PC running the NS-Runtime application. I want to be able to trigger different functions in my project depending on the IP address.
  8. Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys.
  9. Hi, Is there any setup to manage alarms in one PLC from multiple CX-Supervisor runtimes running on different computers? If I get an alarm, it shows up on both runtimes. If I acknowledge from one runtime, I also want it to be gone from the list in the other runtimes.
  10. cx supervisor runtime failed

    my CX supervisor runtime has failed. when i build a runtime, SR2 built succesfully, but when open the SR2 file theres nothing pop up on my runtime. Event/ error log tell that failed to open device, non-specific error occurred: PLC, [CX-Server: MANAGER, ERROR, 0x8825]. How to solve this problem..please help me
  11. Hi All: I am new to Citect and looking for a way to create 1 page that has 25 valves (genie that pops up a super genie) and some analog genie/super genies. What I want to do is create 1 page and dynamically replace everything when someone selects a different rack in the system. I have 4 systems that have the exact same equipment times 10 so I want to avoid creating 40 different pages. Can anyone help with some ideas on how I can accomplish this? Thanks M
  12. WinCC Runtime on Server

    Hi, I'm trying to integrated a couple of machines with S7 300 series CPU's onto an existing industrial VLAN, The two machines currently get their recipe information and send their archive information to a PC running a Win CC runtime package on a separate VLAN. I've changed the IP addresses and can get the Runtime package to work from my PC but not the server that I have been provided with. It's as though the server is too slow, it takes about 3 minutes to establish a connection with the PLC and the monitoring word the PLC sends to the PC to ensure comms is not returned, however when I run the same Runtime file on my PC on the same VLAN it works fine also the ping TTL is only about 3ms. Does anyone have any ideas what could be wrong ? It may be worth saying that this server is a just a partition of a bigger server running a VMware package.
  13. CX-Supervisor can't runtime

    hello guys, i got a little bit problem with my cx-supervisor 3.2. when i clicked the cx-supervisor development project, the message showed that cx-server detected a problem during initialitation. But it could enter the program with the new message again that access to the cx-server project has been denied and finally it surely could not runtime. After that i tried to fix it with uninstall and re-install but the result was the same. Please i need help to solve this problem. i have fixed it as much as i can it didnt work. Thank You Best regard
  14. I am using a KTP700 BASIC HMI panel. I have two languages in the HMI program. On the inbuilt Logon screen, I want to show English text in size 21, French text in size 15. In Runtime settings > Languages and Fonts, I give each language different font sizes, but when I run the program on the HMI panel, they both show up the same size. (For example, I set English to font size 21, and French to font size 15. However, if I access the password screen in English, then later in French, the text is shown in font size 21 in both occasions). This is a problem because the French words are longer, and hence some letters get cut off. Any ideas about how to get around this? (besides just using font size 15 for both?)