Search the Community
Showing results for tags 'nj sysmac network configurator'.
Found 250 results
-
I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio). I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT. I have been told I should be able to do that, but it still does not work. The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before? It may be a setting I have not done right maybe?? Thanks,
-
I am using a Label as a Message Display with Resource Group. I want to do the same thing with my User Alarms, I do not like the Alarm View Popup.....The image is how I assume it needs to be setup. It compiles and downloads without fault, but messages do not display. Any thoughts on what I am doing wrong? I could retype all the User Alarms in a Message Resource folder, but I have a lot of User Alarms.... Thanks,
-
I have done some digging and cannot find an alternative. I need a Multi-State Indicator for my NA-Series HMI that functions like the "Data Lamp". I do not like the "Data Lamp" because of the darker shade to the color scheme. Does anyone know of an alternative? I know I can simply use several "Labels" of different text/color and then only make "visible" the state I want the operator to see...…. Thanks,
-
Anyone know of a guide about programming a balluff io master device into Sysmac Studio?
-
I am in desperation.....I had a Recipe setup made for my NA-Series HMI using Sysmac Studio. It WAS working until I decided I wanted the name of the Recipe to be something different. After I compiled the HMI, I got several errors referring to the new name of the Recipe file. I remembered that there was some background code that had the old name in it so I went there and changed all the statements to the new name....still no luck. I changed the Recipe name back and changed all the background code statements back to the old name....and I still get the faults.... What have I done and how do I fix it? I am desperate to fix it as I have customers on Wednesday morning :? Thanks,
-
In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
-
Still learning Sysmac Studio......how do I gain access to System Variables like 'PageIndex" so my PLC can be notified what Page the HMI is on? Also, how can I execute an 'Acknowledge All' from the PLC so I can reset the 'Alarm Viewer Popup' from my PLC? Thanks,
-
A simple request for an Omron novice. I know Timer values in Sysmac Studio are classified as TIME variables. How can I modify the Preset of a TON block from my NA HMI since the TON Preset is of a TIME data type? Thanks,
-
Hi In CX-programmer there is a PWM(891) function. Is there a similar same function block in sysmac studio ?
-
I am trying to use the "Scroll_composition_all" IAG that I found browsing the Omron Software section...… What am supposed to put in "AlarmObjName" in Properies of my NA5 (using Sysmac Studio)?? I figured it was just a set of buttons that would control the selection bar on my Alarms Display.... Thanks,
-
EtherCAT Communications with Yaskawa SI-ES3 for A1000VFD
WKTilton posted a topic in NJ Series / Sysmac Studio
Has anyone had experience with EtherCAT Communications using Sysmac, NJ5 PLC & Yaskawa SI-ES3 EtherCAT Comms board for A1000 VFD? I have looked at the manual, but as I am still green on Sysmac & Omron programming in general.....not sure I understand what to do to simple Drive Status monitoring, Execute RUN/STOP & Speed Select... Thanks in advance :) -
Compiled my HMI file I am currently building in Sysmac Studio for my NA5-Series display. Not finished, but I executed a Build and this is what I got....I have absolutely no idea what it means...... Thanks,
-
Is there any instruction in Sysmac Studio Structure text to detect rising Edge (DIFU/DIFD) ?
-
I have made a fat bloated program that runs too slow. I tried working under the philosophy that "Premature Optimization" is the biggest time waste in developing programs. Now my program takes to long to run and throws a task error. I am attempt to cut the primary task's cycle time down I tried to move programs that use IO to other tasks. Task 16 is supposed to be able to handle IO but it doesn't come up as a selection choice of priorities for me. I can do 17 but I get errors trying to use IO variables at that priority level. NX102-1200 controller, Sysmac Studio 1.30.1. Should I be able make a task at priority 16? I have some analog IO that I don't need to update every millisecond and I have some data and loop intensive FB's that only need to run once hour and I'd like to get them off my primary task's to-do list. I'll be busy re-writing my program FB's to accept specific variables instead of bloated structured variables and converting and changing Lreal's to real's and some other Premature Optimization tasks so I can run the sucker.
-
I am new to Omron Programming, Sysmac Studio NJ processor & NA hmi. I am used to being able to create diagnostic PLC logic using BIT addressing from a DINT variable for setting diagnostic signals for an HMI. I can also use the DINT to do a quick check to see if it is greater than 0, therefore signaling I have a Machine Fault. I cannot seem to figure out a way to get those BITS setup in the User Alarms of the NA programming. I have found where you can setup a Datatype/Union to be able to use the DINT scenario and Bit level in PLC programming....but that doesn't help on the HMI side. Any thoughts??
-
I need to write c# with modbus TCP to read NJ, Anyone able to to use PC communicate with NJ by using Modbus TCP? Any Function need to be added in the PLC, for Example , PC to read Register 40000 to 40020 ?
-
We have been having a re-occurring issue where some of our PLC's throughout our plant have a network outage that occurs around the same time every night. The PLC's are disbursed among the plant and it has been confirmed no large pieces of equipment are being turned on around this time every night... The network traffic does not fluctuate around this time and is not near a "troubling" level. There was a reboot to one of our servers on the same VLAN as the PLC's that are having the connectivity issues... What could have changed from a server reboot to remedy this issue, the server is not communicating to the PLC's, they are just on the same VLAN.
-
Has anyone had any issues with dirty power or disturbances from Utility that occur duration the night?
-
Hi, I am trying to connect a new CJ2M-CPU31 to a used NS12-TS01B-V2 (it seems to be restored to default). I want to connect that using Ethernet. In the Cx-Designer I have set the following for the NS ethernet Port: - Ethernet: Enable - Net number: 1 - Node number: 5 - UDP Port: 9600 - IP address: 192.168.140.5 // 255.255.255.0 // 0.0.0.0 // 0.0.0.0 And the following for the host: - Name: CPU_A - Type: SYSMAC-CJ2 - Protocol: Ethernet/IP - IP Address: 192.168.140.10 In the Cx-Programmer I have set the same IP address for the PLC from the I/O table configuration. However, they are not connecting. After some seconds the HMI shows a Time-out Error. I am used to works with this kind of HMI, I think the problem is in the PLC because this is my first time working with a new, out of the box, PLC. I have tried to comunicate them using the "Com. Test" tool from the System Menus of the HMI; however, I didnt get it. I think the problem is than the integrated ethernet port of the PLC is not in the Net Number 1. I have tried to set it using Cx-Integrator. I have clicked in "Create routing tables" -> "Insert SIO CPU unit" for the Unit250(Integrated Ethernet Port) -> Local network number = 1 -> Transfer to PLC. Nevertheles, the windows "Online Connection Info" is allways showing Net(-) instead of Net(1): "Ethetnet [CJ2M-EIP21] Net(-), Node (10), Unit (0)" I have checked the Cx-Integrator Manual and says in this case it is only neccessary to "Connect", but I have tried it, waited for the 254 nodes, and... it doesn't work!! I don't know what to do! Thank you.
-
hi dears, I have one CS1D omron Redundant controller ( CP65H) that must be connected to NS15 Touch panel. I want to use Ethernet for connecting HMI and CPUs (CS1D-ETN21D). I have one question. for NS15 we can use CX designer and sysmac studio? is it true? which one is better? what is your recommendation for HMI software? Thanks.
-
How do I edit an array size ARRAY[0..13] OF REAL to ARRAY[0..15] OF REAL? Sysmac Studio doesn't allow it to be done online, as far as I can see. If I do it offline and then go online and Synchronise, Transfer to Controller I receive error Any ideas?
-
Trying to connect our old Sysmac C200HE PLC to the CX-Programmer software however, failed connection appears. We are using a USB-Serial connection and have set up the comms on the device manager. To try and connect to the PLC we are using the Auto connect function, selecting the usb-serial connection and selecting the comms the same as the host network. Any help would be greatly appreciated.
-
Hey guys I have searched the forum, but can not find the answer I am looking for. I have an Omron Nx102-9000 along with an NA5 (9 ") that I use to control an industrial furnace. I need to set an output one at a given time (date and time) A time that should be able to specified from day to day via the HMI Is there anyone who can help me? Then I would really appreciate it
-
Good morning, I am working with sysmac studio v1.25 controller NX1P2 and HMI NA5. I have been trying to link and modify members of an structure in HMI without success and I don't know if i'm missing some syntax or if it is even possible what I am trying to do. 1. In the PLC I have the struct "Formato" and global variable "Formatos" which is an array of Formato. 2. I have mapped this variable to the NA5 so I can use the same data type. 3. I am trying to give a value to the members of my struct with a recipe of the HMI. I am trying with different syntax, with AT connection, without AT connection and none is working for me. Is it possible what I am trying to do? Thanks very much in advance,
-
Hello everyone, I have a problem with packing machine. There are some issues with one of the axis, when axis actual position is near to 1800000 some error appear and operator has to turn off machine on main contactor. This axis is working in Linear mode. I think that rotary mode would be better for this axis. And here is my question. Which instructions, and what options i should change/check when i change count mode in axis's options. Can any1 point me some manuals to read or give me some advice ? Thank you in advance.