Search the Community
Showing results for tags 'nj sysmac network configurator'.
Found 250 results
-
Good Morning I am a beginner in PLC programming using the Sysmac Studio software and please help me if you can I'm trying to make an omron NX1P2 PLC read some message via Socket UDP to my PC through the Socket Test program, do you have or know any program with an example application in ladder? thank you
-
Hello everyone, In Siemens and Rockwell I am used to transferring a double word to a tag that has a UDT data type of 32 bools. Which the binary bits (31..0) of the double word would align with the bits in a UDT data type of bool. If it was in a function block in Siemens I would call the double word address and move it to Area Register Address and transfer data to a tag of udt data type internal of the function block or could call a Move Block as well which will byte swap the bits but can be fixed with an STL call instruction (CAW). Since I am new to Sysmac Studio, how would I be able to do this? Looking at every Data Movement and Data Type Conversion functions all want a form of an array or elementary type, some wanting source and destination to be the same type. Any ideas?
-
Can I simulate NJ controller and NB designer HMI on one Laptop
MedSelmi posted a topic in NJ Series / Sysmac Studio
Hello, Sorry I'm newbie with omron plc programming. I'm wondering how can i simulate plc program on sysmac studio with Hmi on Nb designer without hardware. because I want testing my program and my plc and hmi connection before buying hardware. Thanks in advance ! -
I have a simple question that might be hard to answer: Is it contraindicated to set tags that are continuously updated, such as analog values, as "Retained" ? I'm not sure if "Retained" values are in flash, and if they're written every time the value changes or only on power loss. I have a background in embedded programming, where I had to take memory write cycles into account. I'm working on my first SYSMAC project, and I'm used to Allen Bradley at this point, where FB instances are accessible from everywhere. The fact we cant read or write function blocks from the HMI in SYSMAC is a pain. As a workaround, I'm using structures and I would prefer not splitting the parameters and working-values in different structures. This is my first post here and I didn't see a search function, so I apologize if this was already answered.
-
Hello! I am trying to get hold of the bits in a word, i have read that union is the way to go. My problem is that i cant figure out how union works. I have made a union between a word (16bit) and an array(0...15). The way I understood this was that the word now automaticly updates the array so that when the least significant bit in the word should update array[00] and so on. This is not happening. When I monitor the variables I can see the word change, but nothing happens with the array. Have I misunderstood the consept and what should I do to get hold of the bits?
-
Our IT department is on their annual crack down on administrator access and 'unauthorized' software. This year they are demanding to know why I need to run my laptop with administrator access. Besides the Simulator, what other functions will I not be able to use without administrator access?
-
Hi All, I am working on a system that uses multiple Ethernet IP devices to control Pneumatic valves and D I/O. We have integrated several (smaller systems) with success. However, these systems are using a large amount of network words. One system uses 210 Byte Produce and 210 Bytes Consume. My Current count of these systems on one machine is Six masters. I need a total of 2,520 Bytes plus some for other devices in my network configurator. My controls vendor told me I could expand the network by adding a CJ1W-EIP21 Card to help run these masters. After about 24 Hours of reading the Manual w465 I still dont quite understand how I am supposed to run these valves with this card or with Tag Data Links. Currently I have a network config. with all my masters networked to a CJ1w-EIP21 Card and TagData Links that were setup through the Tag Data Link Wizard via Network Config. I need help setting up variables in the CJ2M_CPU33 using tag link data that will allow me to output data to these masters. All assistance and Information is much appreciated. Nate
-
I have a purchased Machine that came with a Siemens LOGO 8.FSR PLC (Smart Relay). Generally we use Allen Bradley or Mitsubishi. Anyway, we need to communicate data between the LOGO and an Allen Bradley Compact Logix. I do not desire to add an additional network to the AB but as best i can tell the LOGO is exclusively Modbus TCP/IP. Has anyone come across a similar situation? I look online and did find an Anybus module that claims to be able to link them together. Looking for anyone who has faced this challenge and succeeded, or failed. Thanks
-
Hi guys, I just starting to use Sysmac Studio. Its a bit confusing as I am currently used to CJ series PLC. Usually, we can use P_1sec, P_0_2s and so on to create a simple clock pulse timer function. However, I couldn't find the command or FB to do that in Sysmac Studio. Anybody could explain on how to do that in Sysmac? Thanks
-
Ok so I recently got the Factory i/o software to practice plc programming more in depth. I got it working easily enough with the siemens TIA software and I am now trying to get it to work with the Omron Sysmac Studio software. I am not sure if it is possible or not. I have access to the hardware but I was really hoping to use the simulation like I can in TIA. Any insight would be appreciated on the subject.
-
Hi. I am new with omron and i am looking for a suitable platform to simulate sysmac studio. For example Siemens PLC have a special interphase whereby its simulator can connect with Factory IO software so the simulation can be done using 3D like objects. is there any open source (if possible ) platform that can connect with sysmac studio simulator to help with the 3d simulation? Any suggestions?
-
Connecting Micro800 to SCADA via SMS
Marnus Wisse posted a topic in Allen Bradley / Rockwell Automation
Good day, Does anybody know if one can connect multiple micro 800 PLC's to each other via GSM? -
Sysmac Studio 1.31.0.10 crash sometimes, often when copying things like color palettes, string in the Output Window, etc. It's always with NA not NX. I have a corrupted project because Sysmac Studio crash and save the project. NEVER use this file, restarts with the old file is better. The text fields does not appear on all objects on the HMI and it's never the same object each time your download to HMI! Check images below. Font is "No Value". Do you know how to resolve this problem?
-
Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
-
We are using NX1P2 Controller with servomotor compatible with servo drive R88D-1SN it produces noise during operation low noise at low speed and hig noise at high speed we have 2 more axis which doesn't produce any such type of noise. It also produces vibration in the motor.
-
[Tutorials and Quickstarts] - NX1P2 Modbus RTU Code and Write Up.
Michael Walsh posted a topic in Download Comments
NX1P2 Modbus RTU Code and Write Up. View File This code is designed to implement Modbus RTU on an NX1P2 Controller using the NX1W-CIF11, NX1W-CIF12 or NX-CIF105 module (mounted to controller or EtherCAT coupler). Created by an Omron Engineer. Submitter Michael Walsh Submitted 05/22/20 Category Tutorials and Quickstarts -
-
Sysmac Studio Operating System Version Mismatch
kdobsontn posted a topic in NJ Series / Sysmac Studio
Hello all, My coworker is running into an issue where his version of Sysmac Studio has been updated, but this is causing a version mismatch from an existing project. He has called Omron, and they are saying that there's no way to downgrade the OS. Project operating system version = 7.4.0 Device Operating System version = 7.3.0 So the OS on the NA5 would need to be upgraded to match the version of Sysmac. Does anyone have any suggestions to revert the automatic upgrade that has occurred? Any help would be appreciated! -
Has anyone had issues using the Auto-Updater and Administrative Rights? I am running Windows 10 Pro, 64Bit. I need to update Sysmac Studio from 1.31 to 1.4.....when I run Auto Updater (as Administrator) I always get the error "Log on the PC as a user who has an administrative right when install" and it never makes it past the first module of the CX-One Update. I even gave the issue over to my IT guy and he has absolute full rights to every nook and cranny on my laptop. I was told that I needed to allow the CX-One to updates as well since they share some of the same components. My IT guy even tried to do the "download" and install individual modules of the update and that still didn't work. Currently waiting on callback from OMRON Tech Support, thought I'd pose the question here as well....thanks.
-
[Tutorials and Quickstarts] - Setting the NB Clock based on the NJ NX Clock
Michael Walsh posted a topic in Download Comments
Setting the NB Clock based on the NJ NX Clock View File This document details the updating of the clock on the NB based on the clock in a Sysmac Controller. Submitter Michael Walsh Submitted 05/14/20 Category Tutorials and Quickstarts -
Setting the NB Clock based on the NJ NX Clock
Michael Walsh posted a file in Tutorials and Quickstarts
-
How we can connect MPG with omron NX SERIES CONTROLLER. PLEASE HEALP
-
Does anyone have any idea how I can create a Data History though the NA screen. I know I can do a Data Log with a Data Set then use a Trend Graph but, I want to create the "Table Like" Data History found in the Omron NB screen. I use data histories for a UI to an operator to review previous Cycle Times, Poka Yoke values, and Temperatures monitoring with a time stamp as to when the data was recorded. Any ideas? I am using a NX102-9020 NA5 Screen
-
Hi all, after my complaing about my lack of network access in the workshop ive been tasked with fixing this so ive have some general questions about networking and concerning Ewons so this network will be used for connecting ewons to test products as well as general computer access the plan is to have 7 computer access points as well as 2 points to connect to product lines for testing my intial thoughts were to run 2 cables from our network to 2 routers, 4 computer access points and one line testing connection on 1 and 3 computer access points and one line testing connection on the other so first question is what type of ethernet cable should i use? i assume cat5 is fine, is it worth going for cat6 or is it just a waste of money? and should i be running crossover cable or straight through? do i need any specific routers or will anything do? will i be able to add splitters later down the line and be fine? or should i future proof a bit with more robust routers? my years of avoiding networking at uni has come back to haunt me i know the basics but thats all really thanks to anyone who can offer some usefull information i mention the Ewon units because ive been told that they need to be the only one on their connection to the network, although i dont know how true this is
-
Copy array element to member of a structure
Famous_Fella posted a topic in NJ Series / Sysmac Studio
Hello, In my ladder program I have 7 different arrays (containing REAL values) all members of a structure and I wish to extract certain values from the arrays and put them on another structure consisting of REAL values (not arrays). Which is the best way to do that ? I tried AryMove command but I get an error "Conversion from REAL to ANY_ELEMENTARY[], ENUM[], STRUCT[] is impossible. To get a better understanding of my structures and arrays here is an example: Struct wheel_data Global variable SWheel of wheel_data rad[1...10] of real, vary[1...10] of real, varx[1...10] of real struct. 2 wheel Global variable Wheel1, .... , wheel10 of wheel rad REAL, vary REAL, varx REAL what I wish to do is to copy Swheel.rad[1] to wheel1.rad, Swheel.vary[1] to wheel1.vary, Swheel.varx[1] to wheel1.varx 2nd structure Swheel.rad[2] to wheel2.rad, Swheel.vary[2] to wheel2.vary, Swheel.varx[2] to wheel2.varx until I fill all 10 wheel structure instances with values Thanks in advance.
