Search the Community

Showing results for tags 'nj nx internet plc'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 7 results

  1. Hi all, Sorry I am more of an oily rag but I do use PLC's too (badly) I can connect to a FX5u PLC through an ethernet switch and log data into MXSheets on an ethernet connected PC which works fine It isn't obvious how to set it up for remote internet access but I was told it is easy enough Does anyone have an example configuration? Thanks in advance!  
  2. Hi All, I'm new to using PLC, and my background is majorly programming. I am learning how to control a PLC over the internet using HTTP or TCP/IP. I have a Mitsubishi PLC Melsec FX-5U 32MR and my requirement is, I want to send create a setup where the PLC works more like a Client on the network and reads values from the server (which is a computer). The outputs on the PLC are controlled by the values on the database in server.  So, lets assume I have a value like this on the server "1,0,0,1,0,1", it should translate like below: Y0 = 1 Y1 = 0 Y2 = 0 Y3 = 1 Y4 = 0 Y5 = 1 Is there any guidance where I can read through and learn how to do this. I would prefer doing it by ST programming and not Ladder.
  3. plc-plc via internet

    Hello all, I wonder that is it possible to communicate 2 CJ2M plcs or 2 NJ controllers via internet? Those are far from each other. There is WE70 wirelles unit however distance between them more than 5 km. Any idea how can i solve this issue? Thanks in advance. Have a nice day.
  4. OMRON NJ/NX PLC to PLC Over Internet

    Hi Can anyone help with some documentation to setup communication of two Omron NJ/NX PLCs via the internet?   Thanks    
  5. Hello everyone! Need your advice. I own a company and want to start building a web site for it. I have two domain names registered and cannot decide which one is better looking. I will mask the name some so that it does not look like advertising here. So the company name is ***Tech Systems. Offering services in controls engineering and electrical engineering. Yes, I am a self-employed contractor doing programming, control panel design etc. for customers. I will also sell some software products (also controls engineering focused) So I have two website addresses that were available and I registered both: 1. ***techsys.com 2. ***tech.systems Please post your opinion about non-dot-com address vs. shortened/incomplete name in address. Thank you everyone in advance. Every opinion matters a lot to me.
  6. Hello. I'm strugeling to setup communication betwen NS5-TQ11B-V2 and CJ1M ETN via Internet/IP. I have configured PLC: IP: 192.168.1.1 (Node Nr:1) I have configured HMI: IP:192.168.1.2 (Node Nr:2) But I can't get it to work. I See flashing leds on PLC (RD / SD) so the PLC must be answering. But on display I get Time-out error... What am I doing wrong?   Best regards.
  7. Version 1

    271 downloads

    Abstract: This article provides remote mine safety monitoring system design principles and implementation of a network based on CDMA. It introduces the basics of CDMA technology, CDMA networks method described in Remote Monitoring System of Mine Safety. The practical application, obtain the desired results. Key words: CDMA; DTU; Internet; Xiamen Caimore; mine;