Search the Community
Showing results for tags 'network communication'.
Found 234 results
-
Here is a post that we recently completed on the Automation Direct USB to RS485 Adapter. The USB-485M is a 2-wire USB to RS-485 serial communication adapter for RS485 use. It does not require an external power supply or complicated configuration. It has a Type A (plug) USB connector for the computer side and a universal female RJ45/RJ12 modular connector. This will accept RJ12 and RJ45 plugs. The USB-485M supports multiple baud rates and is USB V2.0 Compliant. Read the rest of the post... YouTube Video on the installation and communication to a Solo Process Temperature Controller via Modbus RTU. https://www.youtube.com/watch?v=aWE05ZNZNXw Let me know what you think, Garry www.accautomation.ca
-
Hi all, i am looking for a solution to connect 7 plc with a single scada. is it possible according to my topology diagram ? Kindly make me suggestion and if you have any information regarding the solution then share . Thanks in advance.
-
AB MicroLogix 1200/1400 to GE MDS 9710/9810 Radio Communication
xunilbama posted a topic in Allen Bradley / Rockwell Automation
Good Morning, My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. 10.181.3.104 is lift station 104, 10.181.3.105 is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ? -
Hi all, I am trying to communicate KEPServerEX with FX3GE vis UDP protocol. I have tried but unable to get data on Kepserver. While configuring communication properties in PLC we have configured PLC IP, PLC Port, Destination IP, but unable to find correct Destination Port. Although we tried various port nos like 49320, 57412, 57512, 56233, 1025, 32402, 57212, 57012, 57612, 57812 but there was bad quality data using UDP For same PLC using TCP/IP we were able to read all tags properly. This change in communication protocol is required as there are some PLCs whose communication port drops after few days of connection establishment (no error logged; can be re established with just restart). Someone from Mitsubishi said to try communication via UDP as it continuously fetch data regardless of kind of response received. If anybody has tried or have any solution, please do share. Thanks
-
I am trying to set up a brand new network of PLCs and GOTs in a classroom. Something I haven’t ever done before. I’m using simple Ethernet and going from a pc to a switch then the switch to each device. I can not get anything to communicate to each other. I can read from one GOT or one PLC but that’s it. Any help would be appreciated, thank you!
-
Hi, I managed to communicate a Kinco HMI with a Xinje PLC (XC3-48R) using RS-232. Also, I've established connections between the both equipment and my personal PC, for programming purposes. Currently the uploading and downloading, PLC bits reading and writing happens normally. But, when I disconnect any of the equipment from the PC, (HMI or PLC), the communication is lost between the PLC and HMI. How can I solve this and, remove my PC from the network by making the HMI master and PLC slave ? The software I use for programming is, (XCP Pro, Kinco HMIware)
-
Hi all, There's an issue I am facing for multiple FX3GE PLCs in a plant. Communication breaks between a PLC and OPC server. PLCs after few days (4-10) does not respond over ethernet. No ping response is received over network as well as when checked one to one direct connection. If I restart the PLC the connection is resumed and again after some days it goes down. Error LED on ethernet port does not glow red (no indication for error). If anybody has faced similar issue and has resolved, please share.
-
I am trying to set up a ifm AL1322 EtherNet/IP IO Link Master to communicate with a NX1P2 or CS1 PLC. When using Network Configurator I have added the EDS file and added the AL1322 to the network and set its IP address. It shows all the parameters in the device but if you make a change it says it has downloaded but nothing on the unit changes. If you make a change to a parameter and then verify it says there are no difference even though there are. I have set up the communication with the PLC but there is an error Establishing a tag data link connection failed. This is the same for both the CS1 and NX1P2. I have also tried setting it up using Sysmacstudio for the NX1P2 and get the same result. I have had the unit back to ifm and there is no issue with it running with an AB PLC. I can also communicate with the unit using the ifm LR software. Any ideas why the Omron software is unable to read from or write to the unit? ifm_IOL_Master_AL1322.eds
-
Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.
-
Hello to everyone. I hope you are doing well. I have a KINCO PLC HP043-20DT. I'm communicating through free-protocol instructions XMT and RCV. The manual states that memory registers SMB86, SMB186 and SMB286 contain information about the state of the reception instruction. I would like to ask if any of you know of the existence of an analog register but with respect to the transmission instruction, instead of the reception. The manual does not indicate it and I could not find any information online. I've sended an email to the manufacturer but, until now, I have not receive any answer. Otherwise, how could I search for this information? I tried through the manual providede by the manufacturer, but maybe there is other way. I would appreciate any information. Thank you so much. Kind regards.
-
RS-485 Communication between Micro logix 1400 to 7 segment LED display
podadurr posted a topic in Allen Bradley / Rockwell Automation
Hi Guys, I need to send temperature data from PLC to LED Display through RS-485 communication, so How can I proceed further in this. Please guide me Thanks in advance -
hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me as it looks like port is already used by another program . and i dont know how to kill that program ..
-
Hi, I'm currently in a project where I'm putting up together a network where a CJ2M-CPU33 is reading the memory of 4 G9SP safety controller and communicating with an unchosen HMI. Since I'm new to Omron communications, I've decided to set up a network composed of only 1 CJ2M-CPU33 and 1 CJ2M-CPU31, both equiped with built-in EIP21 port, to help me understand the FINC protocol used to Read/Write and other commands from one PLC to another. I'm currently trying to use the CMND(490) function in the CJ2M-CPU33 to attempt and read part of the D memory in the CJ2M-CPU31 without success. I've tried many ways of sending the Hexa code to the PLC I'm trying to read the memory from but always come up with a 0401 end code (Service unsupported: Undefined command) or nothing at all when my Hexa code is really messed up. It's also good to know that the informatician of the company has succesfully read from the memory area but with his computer. I have provided with this topic an overview of my setup, settings and program in the PLC that is performing the CMND(490) function. I'd also like and take this opportunity to say that I really don't understand the settings in the FINS/UDP and FINS/TCP menu and when and how the PLC is using these protocols even if I've read tons documents on the FINS protocol. I find that that Omron's doc is complete but kinda lacks of setting and program examples. FINS_Problem_description.docx
-
Hello, I'm trying to read data from a PLC using TCP/FINS protocol. I am able to read the data in the memory area from a supervisor PC (using command 01 01) but I do not know how to read the information specific to this machine. Extract from the machine manufacturer's document: Name Data type Address/Value Usage comment Loc_in1 BOOL 1.00 In Local Input 1 Loc_in2 BOOL 1.01 In Local Input 2 Loc_in3 BOOL 1.02 In Local Input 3 UPS BOOL 3.00 Work UPS Input Int1 BOOL 3.01 Work Interlock 1 Int2 BOOL 3.02 Work Interlock 2 T1_LSB CHANNEL D20 Work UPS Hold time LSB T1_MSB CHANNEL D21 Work UPS Hold time MSB REM_1 BOOL H0.00 Work Remote input 1 REM_2 BOOL H0.01 Work Remote input 2 REM_3 BOOL H0.02 Work Remote input 3 This is the document I've written to understand the protocol: 1st frame to send: 46,49,4E,53 : ‘FINS’ 00,00,00,1A : Length(8 de l’entête + 18 de la chaine qui suit) 00,00,00,02 : Cmd (2) 00,00,00,00 : Error code (0) Second frame to send 80,00,02,00 : ICF + RSV + GCT + DNA 0F : DA1-FINS node address of Ethernet unit (Server node=15) 00 : DA2-Destination machine address (0=PLC Main unit-CPU) 00 : SNA-Source FINS network address (0) FB : SA1-FINS node address on the PC side (Client node=251) 00 : SA2-Source FINS network address 01 : SID-any data from the source process identifier 01,01 : MRC,SRC-FINS command code 0101: Read memory areas 82 : Memeory area=Variable type: DM (Dxxxxx) 00,14,00 : Read start address (20) 00,01 : count (1) This shoud send the UPS hold time but everything is at zero. Who could help me ? What is wrong ? Thanks
-
hi i have a as228r delta plc and i want to connect it to two endress & hauser D400 flow meters over ethernet can anyone please give me sample code for ispsoft. the flow meters do have ethernet connections. i want to read flow rate and flow total on the flow meters please thanks
-
Are you working with networks for automation – and operational technology? Are you involved in planning, commissioning or maintaining industrial networks? We are looking for experts for operational technology networks like you for an online interview. We want to understand, how you work, what steps you take while working with your network/s and what you need to work well. The remote interview is going to take around 120 minutes and should take place between 09/14 and 09/30. For your time expenditure you will get a compensation of 200€. The interview will take place online via Zoom or Teams. We are counting on your support as an expert. If you are interested I am looking forward to your response, either via this forum or via eMail to j.walter@custom-interactions.com Let me know if you have any further questions! :)
-
Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!
-
Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
-
Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment? Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?
-
hi, I have a question regarding DH+ network for those who has really experience. 1. I has on plant 5 plc's connected in seral by DH+ network to GW PLC. I would like to de install the last one in chain . question is: while the DH+ disconnection dose all network line will be shut downed? in case of yes how do I minimize the shutdown time? 2. in other case there is HD Remote panel connected in the middle of line . how I can to DE install it with minimum time of shut down for the RIO's tht installed after him in topology. thanks.
-
I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.
-
Hello All, I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it. I have attached the master PLC communication setup for the reference. Any kind of lead/help is appreciated. Thank you in advance. -Yash
-
Dear Anyone. Anyone can help me. How to communication two plc Q SERIES MITSUBISHI.With QJ71E71 100.It Can Read/write .Can Show me. example instruction command ladder.or parameter CPU 1.D0 to d300. CPU 2 D400 to D700. Two Plc can Communication read / write data register. Thanks you for your attention.
-
Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
-
Hi there. Recently I've experienced problems when connecting to a S7-300 PLC via MPI/PROFIBUS. I use a PG with CP5711 processor. The thing is that I'm able to connect when I plug the 6ES7901-0BF00-0AA0 cable (male to male) directly to the PLC connector, but when I try to do connect to a PLC that has any device connected to the DP port (let´s say an inverter or HMI) I get 33:17075 error. PG/PC Interface it's correct, in fact another PG with the same configuration is able to connect through the already connected DP device's cable. Station number and transmission rate is all correct. So I tried the Simatic NET Diagnostics Test and I got error 0x0313 and since the mentioned parameters are correct I refered to this link: How do Diagnostics and Remedy work in STEP 7 when an online connection with the CP... - ID: 11492532 - Industry Support Siemens Where they say the following: I've searched for this readme file but can't find it, and there are no useful results when looking for it on internet. Why am I able to connect directly to the PLC but not when another device is connected and I have to use the female connector of the DP connector itself? Should I try to reinstall CP5711 drivers? According to Windows, I got the last drivers for the CP. Thanks in advance and I hope you can help me!
