Search the Community
Showing results for tags 'nb designer control recorder error'.
Found 367 results
-
now i start to using omoron products, I need to add a button and once i click or tap the button page2 will come on. How can I make it? is that need to program the cxone? using like MOV to H0???
-
I'm trying to get an older system up and running again. I'm using the software from the original build and a new screen off the shelf. (we had one new in the box never been opened.) The program downloads fine but It never shows up on the screen. I get the same Ethernet setup screen that it originally powered up to new from box . I pulled the program from the same model screen and I can upload it to the old screen just fine. but it will not work with new screen, even though it seems to upload just fine. Software is Quickdesigner 3.70 (yes it older) Screen is a Proface GP2400-TC41-24V (which is the same model number of the old screen) Any help is greatly appreciated. (yes I cycled power)
-
I am just getting started with CX One Designer and I am wondering if anybody can tell me if it is possible to change the font and border colour to indicate state for a multi state input. The system I am monitoring has 7 different states and the customer has asked for a colour coded label to indicate the state of the system. i.e. red = bad, green = good, amber = warning etc. Any help is appreciated.
-
Hi everyone, recently we got a complain about UM password protection in the CP1L. So our user intended to apply password to a CP1L PLC which doesn't have battery installed. They were testing to turning off the PLC for about a week. In the 8th day, they turned it on again and tried to upload the program from the PLC. But after they input the password, and error shows up which indicates whether the password is wrong, or already inputted wrong 5 times in a row. Further checking shows that A99.12 memory was turned on which indicates that wrong password has been inputted 5 times. This was not the actual case since we make sure no one was using the PLC in those 7 days. A99.12 by its nature is not a non-retain memory. Is it possible that during Power On, the memory is unstable that it turned On by itself? I know it can be the case on some areas like DM / WR and also the RTC memory. And since A99.12 is a Read-Only memory, we cannot use P_First_Cycle to ensure it's turned Off as what we used to do with A500.12 (Inhibit Output). Currently I'm testing it by myself, for 3 days had left the PLC Powered Off. If anyone had inputs about this please advice. Thank you
-
A simple tutorial .smc2 project program for motion control (1) G5 servo
lamboom posted a topic in NJ Series / Sysmac Studio
hI.. I've asked for this in the past and, so far, haven't been very lucky. Most of the projects I run into have 4 or 5 axis, lots of analog and sensor input.. or don't have the HMI part of the "Machine" I have a nice NJ 101-1000 with the NA 7 inch HMI.. along with a R88BD-KNA5L-ECT servo and a 50W G5 motor.. type R88M-K05030H-S2. All On a nice rack with power supplies and some EtherCAT I/O (It all functions .. even "MC Test Run" gets the motor to jog .. But.. no way to "home" it.... The motor is in "rotary mode" but... it's NOT got an Absolute encoder.. it's a incremental... sniff! I just want it to stop on zero ..Or anywhere, and call it zero ... and make moves plus an' minus in degrees, that's all.... I assume I have to send it some signal (push button) while it's spinning that tells it it's in "Proximity" to home and it then it does something which makes it end up on zero. I've homed a lot of linear motors (LinMot) an' they are very easy to work with. But, Omron has 10 different homing modes .. and they aren't very well explained. Well, they aren't explained at all in that 502 page user manual... you have to already know how to do it, in order to understand the explanation... Example: Take the "Home Proximity Input Signal" .. I can imagine what it might do, to help control a move to home. I can even imagine what's making the signal .. and that somewhere there is a place where the homing parameters are set... like the "axis setting table" .. but, it's not a Global Variable, or a Data Type .. I could imagine it gets into the system from the CN1 I/O connector? or some I/O somewhere? But.. I grow weary of imagining how this system actually works.. Building a simple working project, from a tutorial, or even downloading a simple working project (.smc2 file) and making the minor adjustments to fit my equipment ... would make all the difference in the world. I've searched Omron's Libraries of .smc2 files. Haven't found any yet that aren't on the level of "Top Gun" (a seriously complicated project for a 1-week training class) ... Oh there are several.. related to IAG object files .. but those Library files are not "working projects" intended to serve as a Tutorial.. they are limited projects, ready to be configured with IAG Object files, and "your" programming ... So that you can write the programs you need "faster"... which is nice... but, no help here. Somewhere out there.. is a nice simple .smc2 project file where you get to control a simple motor from the HMI ..Preferably using an NJ CPU and a NA HMI .. home the motor.. jog the motor and input a few "go-to" positions... sigh!.. Like you would do in a One or Two Day class... This kind of thing should be already be available in the Sysmac Library ... Thanks much for listening.. sorry about the rant. -
Hey all, i have one question for you, i am working on designing new hmi for one project in cx designer, how can i import more library and use it in my project .
-
hello everyone, Im new with schneider electic , ı m planing to work with Altivar 630 variable speed drivers and i want to control it with M241 plc in somachine . but when i want to configure in somachine i could not add the driver to my hardware. is there any document about it ? or does anybody control it like this ?
-
Hello, I have a silly yet anoying problem, How can i check the used NS / screen type in a current x designer project? So i have a project, and i need to get a display to test it, but i need to check what is the display type.
-
Error in Modicon PLC Communicatin
ankitjd posted a topic in Modicon / Telemecanique / Schneider Electric
I have Modicon Micro TSX 3722 Version 1.0. while i am doing communication of PLC and PC i am getting communication Error. I am not able to download Programm in PLC. Please find attached image of error which i am getting . please help me to resolve it. Thanks in advance. -
Hi. When i activate adress H417.14 in the PLC i want the system adress LB9012 to be activated. Do I need to make a macro to do this? I have never used macro before, and I do not know how it works. Please let me know if you have some solutions. For the record I am an apprentice, and neither me or my co-workers have an sollution.
-
Omron PLC-HOW TO connect and control I/O throug
-
Hello to everybody! This time I need to make a program to control temperature ... Some help? I don't know how to use an analog module, I'm just starting to working with them. The PLC I have a FX3u-32MR/ES (Mitsubishi), and I have the modules; FX3u-4AD-ADP and FX3u-4AD-PT-ADP for temperature measurement. PLEASE HELP? Have a good day!
-
i need a example code for position control of MR-J3-20A with QD75D4 as intelligence module. and i want to see the parameter if possible
-
I cannot find the list of texts that are used when the HMI switches languages. I found a lot of texts on the project that have not been translated but do not know how exactly to translate them so that they switch when i change from japanese to english. Can someone help me with this? I'm using GT Designer 3 with a GOT 1000 GT16. Thank you.
-
Dear All, Hi my name is arum. I am just starting my own project using CS1W-LCB01 and Omron CS1G CPU42 H, and i am using CX process to program the LCB01. The first time i try the LCB, it was doing well, no error occurred. But now, I have some problems here. 1. Internal board error always appear 2.Error 0A0D was detect when i am try to download the program to LCB. Iam using CX server communication driver. Because the problem always occurred, I clear the PLC memory then download again the PLC configuration, and then restart the PLC configuration every time this problem occured After some times, it doing well. 3. But now, I even cant download the program because there always communication timed out Anyone had experience with this case. Please give me some advise. Thank you in advanced.
-
Magelis HMIGXO family - programming guide missing
HardWorker posted a topic in Modicon / Telemecanique / Schneider Electric
Hi, everyone! I need to connect Modicon M238 (TM238LFDC24DT) with Magelis HMIGXO3501. I was not able to find any programming guide for this family of HMI's, so I kindly ask for a link, or maybe a PDF copy, For now, my problem is that I have SoMachine v4.1 with Vijeo Designer 6.2 installed, and the GXO family is not displayed in the configuration catalog. -
what is this error 2200? my PLC dont have memory card I think the data is erased how I can recover data
-
Hello everyone, I was wondering if anyone here could explain to me how I can program my human-machine interface (HMI) to revert to a Home Screen after a period of inactivity. If the user has to leave at any time, and leaves the HMI on the last screen he/she was working on, I want the HMI to revert back to my Home Screen after 60 seconds inactivity. Has anyone here done anything similar to this before? Do you think it's worth the trouble of having such a function built into the HMI? Thank you for your time and for reading.
-
EMS provides low cost analog sensors useful for PLC analog inputs. For example the $25 temperature sensor (+/- 2%) is a useful and inexpensive way to monitor for an over temperature condition in a panel cabinet. emssensors.com AC voltage and current transmitters can be a useful way to monitor motor performance. Even the sound level sensor can be a good way to generate an alarm condition for a bearing failure.
-
Hi guys, In my current project, I have a number of energy meters (128) communicating on Modnet (TCPIP) with Citect as different IO devices. I have a screen, where I wish to display the communication status of each IO device. If there is an error communicating with a particular I need to associate a tag for displaying the same. Can someone guide me how to accomplish this. Thanks for looking in.
-
Good day lads, we encountered an error on a NByW-TW00B HMI, showing "Print Error 7300-FFFB". Checked already on the manual, which mentioned this : "Driver & UI Printer Settings Disable" (V106 manual, Section 7-9). What's worse is that NB manual doesn't give any workaround for any printer error. The NB is not connected to any printer. The "Enable Print" tickbox is unselected (checked both in the program and in the System Setup Screen). Also there is no button/macro which triggers any print function. Any of you have encountered this? Any advice is appreciated. Thank you
-
Hello everyone, I'm working on an industry project (undergraduate senior capstone project) and need to build a Human Machine Interface for a NS5-SQ10B-V2 module; it will be used with a CJ1M-CPU11 PLC. I've been using CX-Designer and CX-Programmer thus far. This software is new to me, and before this project I have had no experience with OMRON tech or Ladder Logic. This PLC will be controlling a windshield wiper motor and a solenoid valve. Here's what I'd like to ask: 1 - If this were your project, what information would you immediately set out to acquire? How should I prepare the HMI for the PLC? I already have multiple user manuals, including the one for CX-Designer. 2 - Our PLC is already wired, so how do I translate that to my HMI functional objects in CX-Designer? I need to make sure my ON/OFF buttons, command buttons, word buttons, and others correspond to the correct I/O's of the PLC. Conclusion: I have already completed the GUIDE tutorial that comes with CX-Designer, but welcome further tutorials, videos, or any information on working with CX-Designer. Thanks for reading! Any help or tips would be greatly appreciated.
-
Hello, I would like to make single ethernet connection with a cj2m cpu31 and an ns8 screen. What exact setting are need to set at the cpu and at the screen project? Is there some kind of quick guide which shows where to click etc? I dont want to read 700 pages and didnt found a proper manual, maybe you know a good one? Thanks in advance!
-
Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
-
Unable to save due to CTree Error - RSLogix 5000
Foundries_Controls posted a topic in Allen Bradley / Rockwell Automation
Hi everyone, First time posting here, sorry if I screwed up any rules on this forum. I have a logic file that was created two years ago. I'm using RSLogix 5000 version 20.04. The customer has owned it for two years, and I just got the latest copy back from them to do a kit. So when I go to save my changes (offline), I get "Failed to save the project as 'filepath'. An unexpected CTree error occurred." Error 753-80042211. (see attached screenshot) I tried searching this error on google, with no results. I went to the help dialog box, which wasn't helpful. (See second attached screenshot) I can't think of anything else to do, my boss is gone until two weeks from now, the other guy in my department has less experience than me. Can anyone think of a way to fix this? Otherwise I'm completely stuck. Don't think my boss will be happy with me getting nothing done for a week. The help file says: Error saving the project to a different file An attempt to save the project to a different file failed. The error message you receive indicates one of the following conditions: Name is badly formed The name does not follow the IEC-1131 Name standard. Enter an IEC-1131 compliant name. >>> I tried the name "test" with no success Access denied If the file already exists, make sure that you have read/write privileges to it. >>> It is not set to read only or anything of that sort In use by another process The file is being edited by another process. Close the file in the other process if you want to save over it. >>> Tried making a copy to my local drive, opened that one, still won't save Path doesn't exist Make sure that the path exists. If you are saving to a network drive, make sure that you are still connected to it. If you are not connected to the drive, you can save to another drive to preserve any work in progress. >>> Tried making a copy to my local drive, opened that one, still won't save Not enough disk space Free-up space on the drive you tried to save to, or choose another drive. Note: RSLogix 5000 cannot save a project to a drive with less than 2M of available space, regardless of how small the project file size. >>> There's way more than enough space for this file
