Search the Community
Showing results for tags 'nb designer control recorder error'.
Found 367 results
-
Hi All, I have a requirement from a customer to acknowledge alarms from either of two NS15 HMI's in the system. Can anyone provide info on how I may be able to acknowledge or delete alarms on one HMI which would also acknowledge or delete said alarm(s) on the second panel? Both of the HMI's are polling one controller for alarm status so I assume that each time an alarm is acknowledged or deleted it would have to alert the controller which would then send something to the second HMI to clear the alarms? Any help is appreciated.
-
Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one. Thanks Pratik Jain
-
I’m programming a OMRON NB7W-TW01B with NBDesigner and after I download to the HMI updates I made to the program, when the HMI initializes it shows “[0] System Error” for a while and then it disappears, not showing again until the next reboot. The manual only says it is an HMI internal error and nothing more, leaving me clueless about what I can do to fix this issue… I already have updated the kernel and rootfs of the HMI, nothing changed. What do you guys think the issue is, what should I check to try to fix this problem? Thank you very much for the help.
-
I am using the NS series touch screens and NS-Runtime. Do they have a System word that stores the IP address of that touch screen or PC running the NS-Runtime application. I want to be able to trigger different functions in my project depending on the IP address.
-
Hi, I have a question about error clear on Mitsubishi Q Series (Q03UDE). Is there a way to clear 4100 error without power cycle CPU??? I've cleared the cause of the problem and I've tried to clear CPU error using SM50. I've put code 4100 into SD50 and then turned SM50 off and then on again, but CPU is still in ERROR state and I cannot switch it back on into RUN mode. I have to turn the power off then on again and that is solving the problem. The problem is that sometimes it is very hard to get to control cabinet to power cycle CPU. I would like to clear this error remotely if possible. Any ideas???
-
Hello, I am currently working on programming my first sortation system. Attached is a blue print of the in feed conveyors and their loadout lines. As boxes merge together they will be scanned by the barcode scanner. From there we will be told which lane each box must go down, from the WCS. My question is, without encoders, what would be the best way to control this system? Counting the packages as they pass through the photoeye? Or setting timers? Thanks, James Sorting Conveyor Layout.pdf
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
-
Hi all, I have been getting to grips with the different graphic displays in CX One Designer but I am having trouble trying to produce a table which shows column one as a label and column 2 as data value that I am polling from a Modbus slave. From what I have read/tried the data block table seems to require a csv as the data source and I cant seem to achieve what I want with the standard table. If anyone can advise how I might be able to achieve this I would be extremely grateful. Below is the sort of thing I'm hoping to achieve but in a table format: Bearing 1 Temperature 80°C Bearing 1 Vibration 0.2 mm/s² Bearing 2 Temperature 82°C Bearing 2 Vibration 0.2 mm/s²
-
Hi, i'm actually working on a project with a CPU33 CJ2M and a external analog output CJ1W-AD04U I'm trying to read the informations coming from a PT100 sensor and control a valve which act on the temperature. i'm kind of lost in this project because it's my "first time" with Omron ! Which function block must i use or how must i program this would you show me example ? Thank you for the help guys.
-
Hello, I would like to download my project to the NS10 -v2 but i get the following error: I kind of remember that it was p;ossible to update this automaticaly in similar cases, like 8.7->>8.8 or something like that, i just clicked on okay and it did it automatically. But after ok the application just stucks on loading, NS restarts, in case of ethernet. I tried it with usb, it just quits after ok, and nothing happens. How can i upgrade the NS10 to 8.8 or 8.7 or 8.9 to be able to download my new project??
-
Hi everyone. l have a project with omron plc but l dont know omron. l have CJ2M-CPU32 and CJ1W-TC002 also input and output units. do you have a example temperature control programme for this device ?
-
I need help i have a got 2000. I developer my software for the hmi with gtworks 3 my problem is: when i update my software in the hmi over the USB cable with my Notebook then i become an error message after reboot. the error message is: communication error refer to sytem Alarm in utillity menu. At the moment i must disconect the hmi from the current and then it works. can everbody help me?
-
Socket communication with Micro820
Anthony Blanchette-Potvin posted a topic in Allen Bradley / Rockwell Automation
Hi everyone ! I have a little project wich involves communication between two Micro820 controllers via TCP/IP. To do that, I started to work with TCP/IP socket. Within CCW (Connected Components Workbench), I tried to create a new socket instance using the instruction SOCKET_CREATE and set the socket address to 127.0.0.1:21. Basically, my computer through the FTP port. The problem was that it couldn't create a new socket instance (error variable is set to TRUE and status is set to 4, wich I don't know the meaning) because I didn't have a server-side application that listens to TCP/IP socket requests. That said, I found an open source application called SocketTest that listens for TCP/IP socket requests on a specified IP address and port. So, I started a listener on the following address : 127.0.0.1:21, but the error variable is still set to TRUE and status is still set to 4. So, my questions are : Is my IP address OK ? Is my port number OK ? What means the status code 4 ? Is SocketTest doing what I think it does ? Do I need to do something else before using the SOCKET_CREATE instruction ? Thank you in advance for your help ! -
Can't connect to Micro820 controller via CCW
Anthony Blanchette-Potvin posted a topic in Allen Bradley / Rockwell Automation
Hi everybody, Recently, I started working on a project. I want to develop a program for a Micro820 controller (2080-LC20-20AWB) using CCW (Connected Components Workbench). I built a little motor circuit for testing purpose. However, after building the program and downloading it to the controller, I tried to connect to my controller via CCW, but I can't. When I click the button "Connect", CWW crashes OR a window saying : "The controller has unnacepted changes" appears and asks me if I want to "Download current project to the controller" (wich I already did) or "Upload the project in the controller to overwrite current project content" (wich is grayed out). When I choose to "Download current project to the controller", CCW starts downloading the resource, but fails. In the "Output" window, there's a line saying : "Download failed for Device:Micro820: An error occured while reading from GETACTIVERESOURCELIST.". The problem is that there's no documentation at all concerning this error. I even tried to reinstall CCW, but it didn't fix the problem. I joined some images so you guys can see what I'm talking about. Don't mind asking for more details ! -
AnyViz - the cloud service for your PLC
Mirasoft posted a topic in For Sale, Employment, Services or Wanted
AnyViz is probably the easiest way to monitor, operate and analyze your PLC remotely, thanks to the cloud from any location. No need of additional hardware or software licenses. More info at www.anyviz.de Functions: Real-time process data visualization with just a few clicks Record and analyze machine data easily Targeted Condition Monitoring Remote control - from anywhere in the world Connecting machines, beyond location boundaries Access with any modern browser and any kind of device like notebook or smartphone Have a look at our YouTube Channel to see AnyViz in action. -
I am currently in the process of an efficiency project for a company looking to measure at what point their process starts to create particulate (in this case, smoke) so we can accurately defer the smoke into a combustion chamber to be burnt off. My question is, is it possible to use the Dywer SERIES PMT2 Particulate Transmitter for our measurements using a CJ2M-CPU33 Omron Controller and CX Programmer. http://www.dwyer-inst.com/PDF_files/PDS/DS_PMT2Rev.1.pdf If we can use this, I am wondering which cards I would have to get for communication to this transmitter? CUrrently I have analog in and out, (DA041 and AD081-V1), and digital in and out, (ID211 and OC201). Any information on getting this sensor set up is appreciated. I am not familiar with this type of process control. *****FYI If this is not the correct topic to post this, please move it to the correct one.*****
-
Hi. I'm running a Windows 7, 64-bit machine. I have NB Designer 1.4 installed. when I plug in the nb7w-tw00b, it shows up as "MTP USB device", and that the driver install failed. so I opened Device manager and find the item, I right-click "MTP USB device", and "update drivers". I click "Browse for my drivers" and navigate to "C:\programfiles (x86)\omron\nb-designer\driver". I check "Include subfolders". then click next. it does not find the drivers. says "MTP drivers are the best" So I try again: right click the "MTP USB device" but this time I click "browse for drivers", then "Let me pick from my device drivers...". i navigate to C:\programfiles (x86)\omron\nb-designer\driver. I select the bulksub.INF file, and i get this error: "The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with WIndows for x64-based systems" NOTE: I just tried this on a Windows 7 32bit machine. same problem. Except the message says "Make sure it is designed to work with Windows for x32-based systems" Any thoughts to get this to work?
-
Hello admin, Im new to PLC domain , i have one OMRON CP1E N30 with in built RS 232 port and ladder program to run in Homing and forward and reverse motion. I want to control the PLC from a computer using RS 232 communication. From what little i read from manual supplied for programming ,i came to know that there are two type of commands C mode as well as Fins commands. My doubt is whether these commands can read/write CIO memory addresses that are used to set and reset the motor enable/disable in ladder program through CX programmer software? for example: in my ladder program CIO memory address 30.00 is the motor enable/disable address so if i want to control externally from a PC to enable/disable the motor ,which commands should i use and is there a format to send these commands as well as the value. I am planning to build a GUI in Labview to cotrol the PLC via Serial RS 232 . How can i do it ? Thanks in advance.
-
Hey guys, I'm really a newbie on PLC's, I'm working with a metal sheet folding machine. The past programmer gave me it's code, but I guess he gave me the wrong one. So, I uploaded the program with GX Developer 8 to a Mitsubishi FX2N-32MR PLC, all looked fine until I tried to run out the program. The error 6706 appeared up on step 3928 (blue rectangle). I read something about it already in other posts. But I'm not quite sure what to do. Can someone point me on the right direction? I attached an image where the problem thst showed up. Thanks.
-
Dear Support Team, We have a problem in our AB PLC 5/60 Enhanced device(1785-L60B/E), it is a redundant AB PLC system and controlling a Water RO plant. Another paralleled connected system is working fine. 1. Once power went down and power up, the PLC started showing "PROC" error- Steady RED. Loaded the program from EEPROM, the PLC "PROC" error is gone but the DH Channel A RED LED is started Flashing. 2. After loading the program, the program vanishes automatically even when there is a power, and again showing "PROC " Error - Steady RED. Changed new Battery. 3. Looking for the replacement processor, found same series and part number but the Firmware and REV is different. Advise the selection of suitable replacement. 4. The PLC program is password locked. Any solutions or work around to solve the issue.
-
Hi everyone! I am currently using both Motion controller Q172DSCPU and Simple motion controller QD77MS for my application. I spent time for Advance synchronous control with Motion controller QD172DSCPU. However, I wonder that is there any solution to combine synchronous control and interpolation control? For example, I need controlling 4 axes consisting of 3 axes for helical interpolation and 1 axis for linear position control. The problem is that all 4 axes start and complete position at the same time. Does anybody have experience in this? please share your ideas. Thanks in advanced.
-
NS-Runtime Time out error while.....
Chrisdude posted a topic in Allen Bradley / Rockwell Automation
Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys. -
I am a technician at a large repair facility and we often have Beckhoff control panel displays come in for repair. I'm having trouble using Twincat to set up the buttons on a CPxx to test the buttons and assignable leds. We have a PC running windows XP with the twincat software, a CP9035 pci card to connect the CP to the pc, i can see the PC's display on the CP and also recognize the CP in twincat, just unsure how to map testable functions to the keys on the CP. Hope this all makes sense. Hopefully there is a Twincat guru out there that knows how to do this. Thank you!!
-
Is there a way to make so after there is no user activity on a HMI for a certain length of time that it will switch back to another page? I have a macro here I am running every second that is watching for page changes. But obviously changing pages isn't the the only user activity there is. 'clear the counter when not one page If($SW0==BCD(65)) $W150=0; EndIf 'Increment Counter If ($SW0<>BCD(65)) $W150=$W150+1; EndIf If ($W150>10) $SW0=BCD(65); EndIf
-
Hello everyone, I have a quick question regarding Din rails, chassis ground and ground loops. Here is where I am getting confused. I connect my back panel to earth ground which, connects my control panel chassis to earth ground. I screw din rails on my back panel. Question #1: logically, my din rails are now connected to earth ground through the screws connecting to din rails to the back panel. Am I wrong here? As I have seen in many control panels, I connect a ground terminal block to my din rail and connect it to earth ground (the terminal block couples with the din rail through metal clamps). I now use that ground terminal block as a single point source to ground all my other components in the control panel (I connect my ground terminal block to earth ground using a wire).. *** the ten thousand dollar question is Didnt I just create a ground loop between my ground terminal block mounted on the din rail and my back panel chassis ground. For one reason or another the two different location might be at slightly different potentials causing current to flow. Where is my logic off here???? Thank you
