Search the Community

I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus tcp/ip as server in factory IO and the ips are as follows plc CPU: 192.168.1.30 modbus:192.168.1.245 pc:192.168.1.240 (I have set the ipv4 settings with ip address that i wrote subnet mask:255.255.255.0 and default gateway: 192.168.1.1) local network: 192.168.1.1 I want a start stop switch as an example and a warning light so that i get to know how the communication works as it is not working currently I have done the communication through modbus tcp/ip as client but unable to do for modbus tcp/ip as server. the ladder logic code is as follows. the addresses for y80, y81 and y82 are , QY128, QY129 and QY130 I have done some settings for automatic communication parameters that are as follows   The auto refresh settings are as follows   or the factory IO i have created the following environment the settings for driver configuration is as follows Can you let me know whats the issue here as i am unable to communicate via the factory IO with the PLC . Can you guide me in any way?