Search the Community

Showing results for tags 'modbus rtu slave'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 247 results

  1. I am trying to get the communication going between EZ3 EZAutomation Panel HMI and Omron NJ501-1300 PLC. I am currently using Modbus TCP/IP as a protocol. Has anybody figured out a way to do that? Or is there a better way to do this communication between HMI and PLC ? Right now I am using MTCP_Client_Connect function block to connect with HMI but it dont seem to be working. The IP address is correct along with Port no. I am still fuzzy about the Station address of NJ and the function code of the NJ for Modbus purposes. If anybody could help me out I would really appreciate it.
  2. Omron MODBus

    I'm attempting to connect a CJ1W-SCU32 modbus card with 2 ports to several modbus sensors. I am only reading from the senors, not sending any commands. I have been told two different ways to do this: 1. CMND block using Modbus RTU code 2804. 2. Using the Protocol Macro ModbusPM_Master with the PMCR function block. I've additionally found an easy modbus configuration tool that unfortunately seems to take up too many registers that I will be using. Does anyone have any examples of code for setting up MODBUS TCP with either of those 2 methods? I am having a hard time finding any. Thanks.
  3. Hi Everyone, I am trying to connect a Toshiba TRSPUX10A plc to a hitech PWS6600 HMI (Beijer electronics). I am using RS485 connection, and trying to get the communication going between the plc and hmi using Modbus RTU protocol. The PLC is slave and and HMI is Master, and I have a Modbus slave tag table for the plc. HMI Software: ADP3 PLC Software: TRPGMS01 Our supplier of the product cannot assist me as he passed away, and the manufacturers of the systems refer me to each other but with no luck. I have asked numerous system integrators however they only work with the systems they supply. I want to read a Modbus slave tag: Holding register 4500001 in the plc and have it displayed on the hmi. Please advise if anyone could assist. Kind Regards Quintin          
  4. Hi everybody. I have 1 QJ71C24n-R4 with 2 channels CH1 & CH2 and I want to use Modbus RTU for both of channels to read data from electric meter. Now I can do it well with CH2 but cannot with CH1. The reason is echo back setting, my GX work 2 only able to prohibit echo back on CH2, not able on CH1. Does anyone know about this problem? Please give me some advise. Thank you so much.
  5. HELP WITH WPLSOFT DELTA PLC

    Hello , I'm using DVP12SE11R Delta PLC . I would like to read data from an external device using RS485 communication. In the WPLSOFT i have informed that i gotta use MODRD command in order to read the data . but i am not sure how to use it properly.  the data is formed as one bit ('1' or '0') i wanna read 10 registers using MODRD although those registers are not ordered one after another and i know MODRD can read 6 registers one after another. Then i would like to use that bit as a Normally Open contact in the WPLSOFT and turn on a coil. i would like to get some help with it. thanks.
  6. Panasonic PLC Modbus settling

    Dear all,  I am requite to control a load cell indicator with my Panasonic PLC, FP0R-T32MT Panasonic Modbus setting I need to send out the command code as below: 01 10 04 4C 00 01 02 0B B8 EA DE Currently I am using the function F145 SEND   DT10 : 00001 (hex) DT11: 1001 (hex) DT20: 0BB8 (hex) DT21: 2CBA (hex) DT0: 0 (hex) With these setting my output function code is: 01 06 04 4C 0B B8 4E 6F If i modify DT10: to 00002 (HEX) 01 10 04 4C 00 02 04 0B B8 2C BA DA 78 01 10 04 4C 00 02 81 2F This is slightly near to what is want. But i cant modify the no. of write registers and no. of write data.Does anyone know what can i do to change it? 
  7. Hello,  I have to communicate Trane chiller to CJ2M-CPU34 with CJ1W-SCU31-V1 module via Modbus RTU RS-485. Do you know the best way to do this? Any advices? I attach Modbus registry from slave device.
  8. I need help regarding setting up modbus communication between Allen bradley micrologix 1400 and Schneider altivar312 vfd and rslinx for pc. I am totally stuck with it. 
  9. Mitsubishi iQ-R Series

    Hi Has anyone got any real life experience with the new Mitsubishi iQ-R series?  I have been assigned a major capital project to replace our old ageing DCS system.  Our current PLC backbone is about 40x Q2ASHCPU, 10x Q06UDEHCPU and about 2xA2SCPU all linked up via Melsecnet/10 network with communication links into the DCS system via Modbus RTU utilising the QJ71MB91 modbus card. Due to the nature of my companies process and the limitations on plant downtime it is estimated this project could take up to 5 years to complete, with this in mind I am wanting to install a system that will not be obsolete (or unsupported) in a few years, hence, I am very interested in the new iQ-R series with it being Mitsubishi's latest and greatest.  However, recent communications with my local Mitsi rep is not filling me with confidence that the iQ-R series is not as well supported/developed as the Q series.  A major requirement during the development stages of this project is the new ability of the new processors to be able to talk to the old DCS up until a point where the DCS nodes will be completed removed and replaced with a modern SCADA package.  Hence, the requirement of a Modbus Slave card for the iQ-R (i.e. a QJ71MB91 equivalent) which I am told is in development, but has no fixed timescales.  Previous experience with Mitsubishi developments of cards is normally years not months. Any information anyone can provide on their experience of the iQ-R series would be greatly appreciated and if anyone knows if a Modbus Slave card is in development that would be useful.  I realise i could utilise the Q series extension rack with a iQ-R processor but this is not the route i want to go down. Thanks for any help and apologises for the war and peace. Cheers Matt
  10. delta hmi communication speed

    Hello, i have DOP-07s411 delta hmi and i want to interface it with microcontroller using modbus (RTU) protocol over RS485( 8 bit data,1 stop bit, parity none,19200 baud rate). i have good speed of communication if i do not use macros. But as i place background macro(background macro is only 4 lines ) it slow down and  updates the display at every 3 seconds. i cant able to figure out what is the problem. I want to update display of  HMI very fast.Please help me to troubleshoot the problem.
  11. Hello  I try to connect my load cell via RS232 serial port 2 to PLC (PC1L-EM) but it dose not work could you please let me know what is my mistake  Thanks in advance Ebby Untitled.cxp
  12. Hi,  I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
  13. Dear All   Sorry for my English I have Siemens CM1241 (picture attach) and need to communicate with Intellisys XE 90 via Modbus RTU, period. The problem is, form XE 90 the connector is Phoenix Contact 2-Position Screw Plug Connectors MC 1,5/ 2-ST-3,81 1803578,or in other word, only 2 contacts form P9 COM1 = L1 , L2 (picture attach). How we connect it to DB9 Female in CM1241? What signal go to what Pin? How about the Ground? Do I need Resistor?   Thanks for all your supports   Best Regards
  14. RTU Modbus CJ2M CPU34, SCU31-V1,

    Hello everyone. In my project I have to communicate Omron CJ2M-CPU34 PLC with TRANE chiller via Modbus RTU protocol. Unfortunately, I never use this protocol and I have no idea where should I start. I'm looking for examples and advices. If someone has experience in this topic please help me. I attach TRANE chiller documentation. Especially I want to use function 5,6 and 4.  CGAX-CXAX_Protocole_Datalists.xlsx CG-SVU007C-GB_0915.pdf
  15. Master/Slave Communication

    Hello guys, I am using Fatek PLC's to communicate with each other as a Master & Slave through zigbee which is connected through RS485. And I succeed. But the issue is that I have to communicate each other at a distance of about 2km where zigbee out of range to each other. I am bit confused here; 1) whether I use RF booster? Does it work? 2) Should I introduce extra PLC as a repeater between master slave? But this(extra added) PLC repeater also become as a master(Master Repeater).or any idea? Most important I can using Fatek Protocol or Modbus RTU or Modbus ASCII prootcol.
  16. FX3U-485ADP-MB

    Hi! I have some concern dealing with the FX3U-485ADP-MB device which will be plan to install and a total of 17 modbus devices(Chinese brand converter 4-20mA to RS485) where going to communicate. I'm new to this feature of FX3U family and I'm using GxWorks2. Is there anyone that can guide me through this device/development? Is there a program block for this like the one I have been use for analog modules(FX3U-4AD)? Looking forward to your help!   Thanks a lot! Marky
  17. I am trying to export the Modbus points lists from a DAServer in Archestra SMC but I am getting an error message shown in the attached image. All options are greyed out and I cannot export the points list from the PLC node. I know there are points configured on the PLC node because data is updating the the InTouch application. Any help you can provide is greatly appreciated!
  18. 8_decimal Data Displays as only 4_Decimals !

    I am Facing Problem Getting Kwh Readings From My Satec MFM(PM130-PLUS), Required for an easy & reliable Monitoring On Energy Consumption . Connected via RTU Slave Interface with SCADA User Interface (GE_Cimplicity). Here's what happening : Actual Kwh Reading has 8_decimal data digits on MFM LED Display but on Cimplicity SCADA User Interface Screen It only able to Display it as 4_Decimals point digit, eg, 63290058 kwh shows as 0058 , and 15299999 kwh shows as 9999 , and then 15300001 kwh shows as 0001 i.e 1 only! Plz Do a Rply , your slight approach to my Query Will be highly Appreciated!! :)  
  19. GE PLC PCM

    The topic is based on "How to configure a PCM module in GE PLC". One new query in PCM. To configure this PCM Module some procedure is to be followed in CMD prompt. Initially once ''READY'' line displayed. Query to this topic is if ''READY'' line repeats below persistently in CMD prompt, then solution is ______???? 
  20.    Have 10 POE Analog Input Modules available on clearance  10/20-channel Voltage Input, Current Input, & Analog Input Module with High Voltage Protection PoE Module, communicable over Modbus TCP and Modbus UDP    Model Number PET-7017-10     Regular price $459.00/EA    Clearance price $344.25/EA   only good on clearance quantity only.   http://www.icpdas-usa.com/pet_7017_10.html      
  21. Hi, I have just purchased a FX-ENET-P502 for my FX3GE and need a little assistance to get started. I have trawled the WWW to find configuration, connection details, message structure or any other tutorials and clues. I would be grateful for direction to any material to help get started. Thank you
  22. CJ2M Modbus communication

    Hello everyone, in my project I have to connect CJ2M-CPU34 with CJ1W-SCU31-V1 module to external device (see technical specifications in attachment). The CJ2M should read and write a few values from the external device. Unfortunately, I dont have a chance to try this communication before, just during system start. I never make any project on Modbus. Anyone can send me a program to communicate with this device, according to documentation in attachment?   38RBS_Modbus_1.pdf Modbus_2.pdf
  23. Simon was a game that I remember well when I was younger. This simple game can teach us how to program sequencers and look for inputs in a correct order. I believe that this can be a great leaning problem for PLC’s and HMI’s. You can learn about bit manipulation and sequencers in the PLC. HMI timing and control is also shown because of the time to play sounds and update to the next random set of lights.   Here is part of the post …   Building a PLC Program That You Can Be Proud Of – Part 5   Simon is a memory game introduced in 1978. It has four coloured buttons, each producing a particular tone when it is pressed or activated by the device. A round in the game consists of the device lighting up one or more buttons in a random order, after which the player must reproduce that order by pressing the buttons. As the game progresses, the number of buttons to be pressed increases. If the wrong button is hit the current game is over. Our game will have a high level score and a current level score.   We will be using AdvancedHMI to communicate Modbus TCP to the Automation Direct Do-More Designer Software Simulator.   YouTube Video of the game being played: https://www.youtube.com/watch?v=QrfnDHCeJjk   Note: The PLC and HMI programs are provided free of charge and are an excellent way to learn PLC / HMI programming.   Here is a quick review of the programming series so far. If you are new to the site, we recommend reviewing the other parts in the series first. In part 1 we looked at writing PLC programs to control a traffic light using discrete bits and then using timed sequencing using indirect addressing. Part 2 used indirect addressing for inputs as well as output to control the sequence of pneumatic (air) cylinders in the program. Part 3 and 4 we returned to the traffic light application and expand our program significantly. We looked at the sequence of operation using Input, output and mask tables.   The first thing that we will do is look at the HMI programming. Please refer to the following post for information on setting up and using AdvancedHMI software. Create a PLC with HMI Training and Learning Environment Free Read the rest of the post…. Happy Holidays,   Garry www.accautomation.ca  
  24. View File Modbus Master/Client for HMI/SCADA  Overview: The Modbus Master or Client provides an easy and reliable way to connect Modbus Ethernet or serial Protocol Compliant devices with applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports all Schneider Electric (modicon) PLC’s and all other devices which use Modbus as a protocol. Open to support future models for this series of PLCs. Features Modbus/TCP Client or serial Master for communication with Modbus Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) Supports all Schneider Electric (Modicon) PLC’s or any other device which use any flavor of Modbus. Supports DANIELS/ENRON Modbus extensions. Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. Performance –500mhz Pentium–10 words: 15msecs–100 words: 35msecs (avg) Full implementation of Class 0 and Class 1 Modbus functions as well as a subset of the most commonly used Class 2 functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers: Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  25. You can buy books programming Modbus TCP / IP with C# language on Google's Play Store Link: https://www.youtube.com/watch?v=gC2Y...OgG_veiieCTor6