Search the Community
Showing results for tags 'mitsubishi servo drive'.
Found 465 results
-
Hello, I got problem with melsoft GT Designer 3. I created a project and i must go threw recipes. I think I did everything well but my Record No. doesnt work as it should... https://drive.google.com/drive/folders/1p06cnkcfnmodmuLDfrhlshtlYgbUsFnj?usp=sharing Here is video with presentation as it works and GTX file. It have to be done with this kind of recipe. I dont want standard recipe table I think its pretty easy and i have small error Thanks
-
hello everyone, I using stepper 17HS2408, microstep driver, modul motion QD75D2, PLC QD3UDV,, i've been trying to use program Absolute in axis 2. When I trigger the command to run absolute program the current value is running but the stepper motor still not moving, is there any suggestion about this?
-
Question. After install 3 months ago...What would cause a plc module to stop working during production, not let people apply settings and revert back to old settings and permeters. Using some Intelligent design functions. Also it would not let the backup be applied.
-
Hello everyone I am working on modbus TCP protocols to communicate between SEW drive and Omron PLC CP1L-EM. I am following modbus TCP function block from Omron, But i have updated that block because of is not fit to SEW modbus communication. Currently, I am sending a control work to SEW but I am getting error on Modbus TCP from SEW drive, which is invalid data. So I am looking your help is you work with SEW drive before and communicate over modbus, then please let me know how to make a data string for read and write (SEW Drive function 23). I am using 3PD data structure. Thank you
-
Hi everyone. I need help with iQ-R system. Is it possible to connect an additional expansion bus to an existing system without powering down? Also, can I install new I/O module (RX40C4) to an existing system at hot state (like a hot swap)?
-
Hi, I have basic experience with PLCs but have a degree in electrical engineering. I have landed a job which requires me to advance my plc knowledge. I am based within the UK and need some advice on how to go about a solution to a problem. The site I am doing this for needs a site managment system. The site is within food production, this would be monitoring of mostly trips and faults within a wide range of industrial equipment (Pumps, compressors, fridges). The site is mostly Mitsubishi and would like one centralised portal within the workshop to view all of the equipment availability. Thank you.
-
Hi all! How can I use two AB phase encoder at the same time. I use Mitsubishi FX1N PLC, and I would like to use a high speed counter. I think the plc has 6 high speed counter input, but I cant use only one at same time.
-
How do i include the fractional part of the position I set for encoder
Jo Palm posted a topic in CX-Programmer
Hi, I need help with my program. How do I include the fractional part of the position I set for encoder? I have an Omron PLC and using cx programmer. I need to command my servo (from HMI number input) to move to a certain position. Now using a manual computation, my servo is supposed to move 95.65mm, however, using my plc program, the resulting position doesn't include the 0.65. I used the FIXL instruction to convert my result from float to 32 bit and it removed the fractional part of the value. Thank you! -
Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd moblue. I want to connect 11 vfd and one fx2n plc also
-
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
i wana connect gs2110-n with a2ushplc-s1with rs422 icant find diagrn wireing ? can you helo me please...
-
Hi, I have to implement an axis control in a NX1P2 PLC using an inverter (3G3MX2) and an encoder cabled on a EC0122 board. I found something similar implemented on a CJ2M PLC, but I have no idea how to set up the axis in the configuration of sysmac studio and how to implement the control. Can someone help me? Some sample to catch out the configuration? Thanks a lot Andrea
-
I have plc mitsubishi A2USHCPU-S1 and there is already a program in it. The problem is, the analog input data doesn't want to be saved. How do i find the analog address instructions? Can anyone help?
-
Dear forumers, It started on ISPsoft end nov. 2021. I have to program a MS300 drive. It is a very interesting software. And even if it is a bit rigid, in ladder for example, I begin to like it. I would need some help though, especially on the APIs properties. Indeed, the F1 help doesn't work well. Sometimes it doesn't open (can bypass), sometimes the APIs I’m looking for is not in it. In the different pdf's I have gathered, the APIs, especially those concerning the MS300 variator, are not all explained. Does anyone have precise literature, official or personal, on these APIs? It is difficult to program by having to guess/test. The doc. I currently have: Delta Standard Compact Drive MS300 Series User Manual (2 PDF : one with 688 pages, one with 510) 2 Quick guid, probably done by my seller (Word format) ISPSoft User Manueal (2 PDF : 2017/06/14 with 840 pages; 2021/03/29 with 1160 pages) A few DVP PLC PDF : DVP-28SS2; SA2; SS2… I also had trouble installing the last 2 versions of ISPsoft on a Windows 7 pro 64 bits PC. The V3-14-0 version refused to install, displaying an inability to write to a temporary folder. The V3-13 version (SW_20210420) just froze during installation. No info. I didn't look further (the client is coming netxt week), I stayed at 3.12.01 (beta) Has anyone ever had this? I will try insall V3-14 on a windows 10, and also try a monitored install on my one personal PC at home with w7 pro 64b. Thank you in advance to anyone who can help me. I have contacted DELTA support in Europe and am waiting for answers. As well as my seller, who has technical competence, has already used this software, but is far from having answered all my questions. Best regards, KsioP
-
Can someone help me how to transfer D memory in gx works 2 but only 8 bit (Mitsubishi D memory is 16 bit cmiiw) ?
-
Hello, I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable. I can not see any advantage to switch to iQ-R, but some people want to. So I want to know, 1. will Q be outdated in the near future? 2. will use iQ-R cost much more than Q? including peripheral units. 3. has iQ-R really been widely adopted? 4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous, is this right? Many thanks in advance. Ting
-
I'm attempting to look at an offline PLC program to see device values (Ts, Ds, Ms). Is this even possible? Are device values saved when saving a program online? Program is for a Mitsubishi FX3U. Using GX Works2 v1.601B. Win10-Pro OS on the computer. I've an AB background (several decades), but only a couple weeks with Mitsu. Unfortunately, the person who originally wrote and maintained these programs isn't available. This is an easy process with AB, but I just hit walls in the Mitsu IDE. Can anybody help?
-
Could you display text data from sent from hyperterminal on a mitsubishi GS2107 HMI? If you type in hyperterminal the text should be visible on HMI by connecting it through RS232 port. Can this be done without using PLC
-
how to use function (prun)
-
Hey y'all- I have an application that uses an Allen Bradley servo with a brake and a linear actuator to lift a plate vertically. While maintaining a position, the servo drive (Kinetix 5500) will occasionally fault due to over-torque. I'm thinking it could possibly be due to mechanical issues i.e. bearings in the actuator but my initial thought would be that it would fault while moving up/down as well, so far I've only ever seen it fault while holding a position. This leads me to suspect that there may be something off in the control loop. I'm not involved in the setup but I know we use load observer and I reckon we use auto-tune. Other than that, I wonder if it's something to do with the brake. I also read about mechanical resonance in the manual which seems like a stretch but it could be contributing, the frame that the actuator/motor is attached to does vibrate a fair bit. I'm familiar enough with basic motion control using Allen-Bradley and understand the basic concepts behind the servo/control loop. However I'm at a loss for why the servo/drive would spontaneously over-torque while maintaining a position. How would you guys approach troubleshooting this further/solving this issue? Many thanks!
-
Hello, I wonder who can help me out here. I am new to the CX programmer. I want to communicate to selema drive through CX programmer. The drive is IPS plus Selema. The company was gone in 2017. There is no manuals regards to the drive. Here is the issue, in the program. The SPED block show port specifier is 10, the INI blcok show Port specifier is 0. Refer to the PLC picture, my first questions which one is port 10? I think port 0 is the left bottom cable from the second picture. So port 10 is the last module? Second, Do anyone have manual or knowledge with the selema drive? Is there another one to communicate with the drive not using CX programmer? thanks
-
Hi! I would like to do some tuning on our machine, but the problem is that the machine stops and drops origin positions. I selected User Command method with Basic setting. After 5sec I started the tuning, the machine stops with the roblem of that axis. Is there a parameter bit that goes high (or low) during tuning? There're no strange sounds nor movements..even the amplifier doesn't give error code. Is there something else that i should check? In the Servo-Adjustments parameters, One Touch Tuning setting I found the Permissible Overshoot Amount Level is set to 0. Can it be the problem?
-
Using Virtual servo axis to control 2 real servo axes
PLC Killer posted a topic in NJ Series / Sysmac Studio
Hi there I was reading this thread: And trying to create 3 axes. 1 virtual axis and 2 real axis, I would like to use MC_GearIn for each real axes so both real ones follow the virtual axis (so both can move in sync motion). But my question is: If I give Move cmd(Absolute or relative)to master virtual axis and since it's virtual, it is not going to move then how can the other real ones follow the master(assuming that it's literally electronic gearing). Any help will be appreciated! -
Anyone know what could be missing to be able to import this stepper motor to sysmac? This is one of the supplied xml files for the stepper motor. FASTECH_Ezi-SERVO2_EtherCAT - OMRON.xml
