Search the Community
Showing results for tags 'mitsubishi plc fx1s'.
Found 346 results
-
Is there a way to change the parameter of a mitsubishi mr-j3a using fx3u plc? Need this to change the pulse output of a master servo amp to change the pitch of the other slave servo amplifier.
-
Hello, I would like to see your logical opinion about this situation and in which part of system where I need to find solution - software or in the physical field. Subject: Twelve old system based on Mitsubishi PLC AnS series, Profibus Here is pneumatic transport, with 5 lines, each line have a shredder and discharge valve. A few months ago, when line 1 works , display shows line 2 and vice versa, it was first problem, but the system was still working. From the last week system doesn't work. On the display appear line 3 in works, but system can not started. Alarm shows Double address (perhaps two valves have some address), Alarm still appear after reset and even all lines are turned off. What is your opinion where to find proble (PLC, I/O moduls, cables,...)
-
Mitsubishi PLC - The parameter Set Value is Out of Range - GX Works3
Bickers posted a topic in Mitsubishi
We have a PLC application that has been created in GXWorks3. We're using an IQ-F FX5U-32MR/DS with two analogue components: We're able to run our very simple program on the simulator and are having no issues, however when writing the changes to the PLC, we get the following error: We can't find where this parameter lives, and where to set it. According to the manuals, we think these means the set value is out of range, but we're not sure where the range is defined. What could be wrong with this parameter, and how do we change it? Thanks. -
Hello there, I've done some reading through GT Designer3 Version1 Screen Design Manual (Functions) and in chapter 30.3.6 - Program examples I've found functions used like: redraw_object(); d_circle(params); or acces of object params via script like my.active = 0; my.text_color = 0xE0; So, my question is, does anyone of you have/know about documentation for this advanced stuff, it could be real game changer for me. Thanks in advance for any reply
-
Help For communicating Mitsubishi Q-Series to Mitsubishi A700/A800 inverter via RS-485
Xhance posted a topic in Mitsubishi
I'm having trouble in finding a complete manual instruction and set-up on setting up a communication on a Q-series PLC to a inverter a700/a800 via RS-485. I have a manual for fx series, are the parameters the same as the fx series? how about the program, like starting or stopping the motor? Are they same or not? In the Q-series, do i leave switch-5 "station no. setting" blank? i just started this so i hope that i can make this work after new year. This is the manual for the fx-series plc====> http://www.automationsystemsandcontrols.net.au/PDF%27s%20Mitsubishi/Manuals/FPLC/FX%20SERIES%20USER%27S%20MANUAL%20-%20Data%20Communication%20Edition.pdf PS: I'm mostly self study because i don't have proper training yet and my school sucks. -
Hello everyone, Have a nice day to all. We just received a small machine from china, and definitely we done a lot of modification to add safety and other sequence, to adapt this machine to the existing line. I'm familiar with siemens and omron, and this is my first time for mitsubishi PLC. FX3sA-20MR, can somebody pls. help me what software do i need to download and programming cable to communicate with the PLC. Thank you in advance...
-
Hi ,Im a Electronic Technic in a Molding Factory and i have a problem with one of the machines because is suddenly stoping of execute the code without reason,i tough that was the hmi was is working well.
-
Hello everyone, I'm a beginner in RS485 communications and i want to control 2 inverter LS iG5A via RS485 from a PLC Mitsubishi FX2N I really don't understand how i should aproach and start this part of program in Ladder Diagram, to write and read parameters from Inverters. Please help me with an example Thanks.
-
!! Need Some help with FX1N-232-BD connect HMI Panasonic GT Series
matcha125 posted a topic in Mitsubishi
Hello, Everyone . Do anyone has experience in FX1N-232-BD connect to GT11 (or other model) from Panasonic ? I try to connect them via RS232 port and I setup parameter following HMI manual but It doesn't work at all only RX led on 232-BD blinking Any suggestion ? Matcha IMG_39346964.MOV -
Dear Member , I have programed high speed counting via PLC FX2n using code c252 , but it shovs me decimal like 23545 , so question is how can i make number to have decimal after point example 123.20 ?
-
Hi everyone. Is it possible use mitsubishi safety plc as logic solver for fire and gas detection system on the plant ?
-
Hello! What i am about to do is connecting an external SCADA system to a Mitsubishi PLC via OPC server. I have already made some FBs and included their instances in a program in GX Works2, then started a GX Simulator2 and connected it to an OPC Server. From the OPC configurator I have defined some tags with their corresponding device addresses (e.g. D12345). I am using structured variables which device addresses i am entering in the OPC configurator. Tried to make some full rebuild compiling and at first was happy that the devices remain unchanged. The main problem is that after some time this devices change which completely ruined my experiment. Maybe there is some point that I am missing or there is just no way to use a fully functional SCADA connected that way to the Mitsubishi PLC (by OPC)? The question is is there a way to tell a particularly used instance of a function block to have exactly the same device addresses ever.
-
Hello, I want to connect the Siemens PLC S7-200 with MR J2S 350CP using Serial communication (RS232/422) so, is it possible or no , any one have an idea... Thank you in advance
-
Hi Everyone I Have to replace Mitsubishi Plc with SIEMENS plc. I am new to Mitsubishi and worked before only on Siemens PLC. I have the uploaded code from Mitsubishi. I am facing problem in Analog Section about data values, Un/Gn, and Analog inputs and Analog Outputs.. Could anyone just Guide me about analog part. I Upload the analog section below. Thanks in Advance Analog.pdf
-
Hello to ALL, does any know, how to edit MITSUBISHI PLC M730MB directly on machine, or with witch program can be open and edit. Thank you and BR...
-
I am trying to connect HMI( GS Series) to Laptop but every time it says " Device not recognized ". Tried changing the port, Laptop, whole HMI. It was working for 2-3 times after installation of new software( both Windows and GX Designer). Tries uninstalling and installing GX designer. Pls help.
-
-
[Manuals, Tutorials] - E-Designer_for_E-series_English.pdf
CJ2M2016 posted a topic in Download Comments
E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials -
Hello everyone, Is there any way to communicate with Mitsubishi Servo amplifier MR-J2S-350CP through RS232 ,I prefer to use 224XP because i already have it... thank you
-
Hye, I new in this plc understanding. For now I have this one ladder diagram that created in mitsubishi GX Developer that I use in winding machine as its plant. But, I have to make the FUNCTION BLOCK DIAGRAM for this part in CX Programmer. Can anyone help me how to construct the FBD in CX Programmer from this ladder diagram understanding . And did it is actually the counter function ? *the picture showed the ladder diagram*
-
Hi, I'm trying to set up a TCP communication between a Q03UDECPU and a Beijer E110 panel I've tried both TCP and UDP as "communication mode" in E-Designer. nothing seems to work. What I'm I doing wrong Se attached files from E-designer and Gx IEC Developer
-
i try to use M8029 to be able run pulse in sequence, i mean i can't use regular PLSY or DPLSY, it doesn't work. So i add M8029 to help clear it and make the plc able to make pulse again. But the problem, when the sequence is finish and i need to start again, plc doesn't give pulse again because the memory that set it on is already reset by M8029. how to set it on again or reset the M8029? By the way, i'm using FX3U-48MT. Thanks,I would really appreciate your help.
-
Dear mrplc and plc experts, I would like to ask for any solution or insight regarding to mitsubishi cpu problem with code: SP.UNIT LAY.MZZ which I could not find any footage/information related to this error Your helps are really appreciated.
-
I want to do a calculation in the FX3u-48MT ESS and combine it with the input from HMI GOT1020. By the time i put input in the HMI with real number, and i calculate that with some equation just like in the manual as seen in the picture. I was confused when the result in the DINT is too many and in the pulse, it got minus, when it should be plus. Is there any way to fix this ? and how to round up the result correctly ? I really appreciate your help. Thanks in advance.
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
