Search the Community

Showing results for tags 'mitsubishi fx2n-8ad'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 267 results

  1. Hi, I have a project and intended to use a FX3U PLC and E1071 HMI with a 1000ppr encoder. The project involves scan an object placed inside a blister cavity and decide it is good or bad by a sensor. If the object is good, then the input X007 turns ON and if the object is bad, then sensor doesn't activate X007. The blister is created in a PVC film roll and is in continuous process. A knife cuts the pack as per the size required, then the pack will move to a reject/accept station. The physical length from scan station to knife station is fixed If I use SFTLP, I can track the X007 bit until it reach the reject station and take the decision to reject or accept the object. But the issue is the number of packs from scan station to Knife station will vary according to the size of the pack. Bigger pack size has less 'Bit length of the shift data' (The length of shift register, n1) and smaller pack size have large 'Bit length of the shift data'. It is required to set the 'Bit length of the shift data' from the HMI, but the 'n1' of the FNC 35, SFTLP cannot take a D Register to set the value from HMI and it is a constant K or H. I have seen the operation on other machines using HMI to set the length of the Shift Register. but I cannot figure out the logic behind it. Could anybody please help? Thank you for your time.
  2. Hi all,  I am in the process of doing a project for some school work and need to do a SWOT analysis of the latest modular PLCs from Mitsubishi (R series), Siemens (S7-1500) and Allen Bradley (ControlLogix).  So I thought what better way than to ask the people on what they think are the pros and cons of each! Thanks for your responses in advance!
  3. Keyence Vision System and Mitsubishi

    Has anyone used Mitsubishi FX5U and Keyence CV-X Vision System? May I use SLMP Communication? Manual talks about RS232C, but I don´t have the module
  4. Hi,   We have a company that is specialized in bandsaw machines, this is one of those machines: What we have done is hook up a wire encoder to the saw bow and the other end of the wire on the base of the machine. You can see a picture of it in the attachment. I have followed the manual of the FX2N-2AD module, the wire encoder requires the current input from 4-20mA, and I am getting a digital output, but this needs to be converted to show in millimeters on the HMI. Unfortunately I am only learning how to do this, and am not an expert in Mitsubishi PLCs (yet). Currently the only code we are using in PLC for reading the 2AD module is found in attachment. TLDR: Wire encoder giving a digital output, but now need code that can convert this value into mm.    
  5. Hello all, I am trying to write one FB for Analog Scaling in GX Works 3 Software for my Mitsubishi FX5U Plc... Unfortunately i am not aware very much about ST Language instructions of Mitsubishi Softwares. So the Code is Giving 5 Errors, i think the error are due to incorrect data conversion expressions, Can you please correct me with my code ? Here are the Variables RAW_MIN                   Word [Signed]                      VAR_INPUT RAW_MAX                  Word [Signed]                      VAR_INPUT SCAL_MIN                  FLOAT [Single Precision]    VAR_INPUT SCAL_MAX                FLOAT [Single Precision]    VAR_INPUT AI_RAW                      Word [Signed]                       VAR_INPUT SCALED_OP_REAL   FLOAT [Single Precision]    VAR_OUTPUT SCALED_OP_INT      Word [Signed]                       VAR_OUTPUT Here is the Code SCALED_OP_REAL:=(((SCAL_MAX-SCAL_MIN)*(INT2FLT(AI_RAW)-INT2FLT(RAW_MIN)))/(INT2FLT(RAW_MAX)-INT2FLT(RAW_MIN)))+SCAL_MIN; SCALED_OP_INT:= FLT2INT(SCALED_OP_REAL);
  6. G.READ

    Please help me to find G.READ instruction in Mitsubishi PLC,   Thank you
  7. Hi all,  I am trying to configure an Fx3ge-24M PLC using GX-works 2. I can successfully connect to the PLC using the USB cable, however i am having trouble getting a connection via ethernet. I have attached a photo that contains the only ethernet configuration that i can find, what am i missing here? I'm new to GX works & mitsubishi PLCs.  
  8. Conection FX2N-1PG & MR-J2S

    Hello to all I have a FX2N-32MR-001 PLC which is connected to a FX2N-1PG. The FX2N-1PG  is connected to a MR-J2S Servo. The backup battery's PLC has finished and its program has been erased. Now, when I download the application into the PLC, the connection between the FX2N-1PG card and the MR-J2S Servo Drive is not included. Please help me.
  9. Pulse FLow Meter

    i have a paddle Wheel Floweter of TOkyo Keiso W2000. its frequency is 88 Hz .  Flow Rate  30L/min. i want to connect it with mitsubishi fx3u plc digital input as it is pulse flow meter.    kindly tell me how can i determine its pulses for liters.
  10. mitsubishi nexgenie plc target settings View File This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,    Submitter lionheart86 Submitted 01/18/17 Category Demo Software
  11. Hello Everyone, I am looking for sample program which are compatible with Mitsubishi Gx Works 3. Program should contain some timers, counters, arithmetic, data conversation so i can see the instructions of each and every basic blocks... I am using iQ-F FX5U Plc with GXWorks3 Environment.
  12. Hello, can you help me with the following issue: I want to transfer the program/data from an old E1043 HMI to a new one. Tried with HMI Tools File transfer, the connection is established but after initialization and loading I am getting an "Error:Read directory failed." Connection made by serial cable-serial cable / serial cable-USB, result is the same in both cases. Is there something to check in order to make the transfer? Can I use E-designer for this purpose, and, if yes, how? Any suggestion could be helpful. Thanks in advance!
  13. Hi! I have a question about programming. I want to place an input (X01) on the left vertical line, to allow the rest of the program running by an external switch. How can I place an input like that? I work on Gx works2 and using an Fx3g Plc (I used it once, but i can't find that program.)
  14. Hi everyone. I have project to use PLC Mitsubishi Q03UDECPU with QJ71EIP71 to connect with SICK FLEXI soft Ethernet/IP (FX0-GENT00030). I have check both manual but when I turn on Y0 (communication start) there are error code F100h on my QJ71EIP71 and I check that it can only use with produce/consume tag from PLC (such as OMRON, Allen Bradley) but for SICK device it can use only for assembly instance. Then I have use Ethernet/IP scanner (Molex) to read attribute (service code 72h) then I can read status from SICK but as I told before QJ71EIP71 can only communicate with tag-based. Then I have to ask everyone that 1. Are there method that can use QJ71EIP71 to communicate by use Assembly Instance? 2. Could I set consume tag name on FLEXI soft Designer? 3. Are there any protocol gateway device that match with these solutions?
  15. Hi, We are develop the application in Visual Basic 6.0 for Mitsubishi Q series PLC. (MX OPC Server- Middleware.)   In Visual Basic 6.0  sometimes the data flow is failure so we are not able to do process further. Please provide the SDK for the  (.NET  Microsoft Visual Studio 2015 versions) Regrads, Vanchinathan.K  
  16. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. Feel free to contact me. https://plc-online-training1.blogspot.com
  17. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. https://plc-online-training1.blogspot.com
  18. Mitsubishi & Siemens OPC connection

    Hi All,  I am undergoing a project that requires me to connect a siemens s7-1200 with a Mitsubishi FX-3GE PLC using OPC UA. I was under the impression that Kepserver ex could do this, you ca install a 'mitsubishi suite' and a 'siemens suite' which will allow the kepserverex server to choose the drivers and connect the two plcs. Siemen's support however have told me that the s7-1200 CPU cannot function as an OPC client, and just as a server? If true, I do not understand how to get the mitsubishi FX to be a client to the siemens server, as kepserverex seemed to provide a solution.   
  19. Mitsubishi FX 3gE & OPC?

    Hi all. I am trying to connect up a Mitsubishi FX 3GE and Siemens s7-100 using OPC. I have been told my siemens that the FX series of Mitsubishi cannot talk over OPC, has anyone ever managed it? I find it hard to believe a fairly recent PLC cannot use OPC. Cheers!
  20. Hi there, I'm unable to write to my plc (FX5U-80MT/ES). Error LED is continuously flashing. Gx Work3 diagnose tells me ''CPU File not found, ...''. I just don't know how to rewrite/reset the CPU File. I spent days to read a bunch of iQ-F manuals to find out, but no luck. I'd appreciate any help to fix this issue.
  21. FX2N-32MR Prog/CPU Error

    Hello. I first off I wanna say that I am completely new to PLCs and am trying to help fix my Uncles hydraulic die cutting machine that uses a Mitsubishi FX2n-32MR plc. It has CPU version 3.10 and ram memory and is giving him the error 6402. This machine was working perfectly fine up until a few days ago. I already know that the backup battery is toast. It was only reading 0.1 volts. I am trying to figure out if the plc is fixable, if this is a software or a hardware issue and if so, how to fix it and help save him $$$.  I have successfully communicated with the PLC using a usb to sc09 cable and have the following software installed: GXWorks 2, GXWorks3, GX Developer and MT Developer 2. I got the error 6402 from GX Developer. I have attached what I believe to be the Program that it has installed to the PLC, but all I did was save it after the program read it(it had an error while reading it) so I dont know if there is actually any data.  Any help or direction is greatly appreciated. I have attached 2 images as well. Not sure how helpful they may be. Default Program.rar
  22. Hi all, how can I read data from Mitsubishi PLC (model Q04UDVCPU) using TCP/IP socket communication? I can connect to the PLC (using an address and an open port) but I cannot retrieve any data. Thank you.
  23. Hi Omron Experts,  I am connecting mitsubishi HMI with Omron nj101 plc via ethernet, pl tell how to connect tag data of Omron plc to the hmi
  24. stf and stop on at same time

    i have a 800 series vfd drive that when trying to start has the STF function and stop on at the same time, does this sound like a plc issue or a wiring issue?
  25. Hi, Friends any one have FX5u cclink ms with ifm io link project .. sample backup and setting please share with me.