Search the Community

Showing results for tags 'mitsubishi fx2n-8ad'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 265 results

  1. Anyone possibly have software for the Mitsubishi Positioning module AD71 (SW0IX-AD71PE) ? It's a servo positioning module for A Series PLCs that can either be programmed by an old programming terminal or a DOS based program for PC. I think SW1IVD-AD71P could also workReally hoping to find the any compatible software for this controller. Maybe someone has leads?
  2. Hi guys, Has anyone ever implemented a Siemens S7 RFID tag reader into a Mitsubishi PLC system? Is this something that is fairly supported to be able to achieve? Or a right pain to set up?
  3. Dear colleagues, Maybe someone faced with cylindrical grinding machine G32P-100NC model by Belor Co., Ltd or Supertec and have a set of programs for it? The program of A2N-20GM (FX2N-20GM) module has been lost. 
  4. Hi guys, im trying to redirect a screen when a bit is active in GT designer3. im still a beginner in the GOT. any help? regards, sathu.
  5. Hey Everyone,   My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong.    I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through.  I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on.   Thanks in advance.
  6. Mitsubishi FX2N Battery Error

    I got through a mitsibishi FX2N PLC and when i turned it on it was giving battery error. So when i checked it with system and run diagnostic so i found the same error. By visual inspection i saw that there us no battery in it and someone has taken it out. So my question is that how we are going to reset the PLC when the battery was not intact for how long whixh we dont know. I have the copy of program with me to upload it to plc but the actual issue is battery error.
  7. Hello,  Greetings everyone, I want to communicate RFID with Nexgenie 2K PLC via serial communication protocol (RS 422), I am using Codesys 2.3 software for the development, may I get any sample program regarding this or someone can suggest me how can I implement my program, Thanks in advance.
  8. Dear Mr. PLC forum members, I am brand new to the world of PLC’s and I am looking for advice on PLC platform selection for a device prototype. The proposed PLC is for a “smart” hydroponic system. Please see system I/O and other parameters below. Parameter 1: Price - I am self-funding this so price of PLC and software is important. Happy to spend ~$2000 for PLC; I/O cards and related hardware. Total prototype cost is around $15,000 including PLC. Parameter 2: Availability & Support in Australia. Parameter 3:Newbie Friendly: I intend to code the PLC myself and have never coded a thing in my life before.  Parameter 4:Discrete Outputs: 11; Discrete Inputs: 0; Analog Outputs: 2-3; Analog Inputs: 9  Parameter 5: Capability to extend to IOT for remote access control and monitoring (via cellular or wifi router)   As you can see, this is a relatively simple automation project. All my research seems to point to Automation Direct’s BRX PLC but I just wanted to get some suggestions and feedback before purchasing. Anything else that might suit my needs? Any insight would be greatly appreciated. Bruce   
  9. Keypad in GT Designer

    I need a key pad which can be used for numeric input, can anyone provide any sample program.   Thank you.
  10. Float Value FX2N Problem

    Dear All, I am facing a problem in FX2n, Infact i am making a totalizer from the flow. everything is fine. but client demands to add some totalizer value to start with totalizer.  the problem is that when i add 50000 value the value of registers stucks. although i am using 32bit float register along with DEADD command for Totalizer. the makes some steady at some place. i dont know why. but i give the totalizer 0 it works fine.  Any Solution regarding this will be help.    Value in the D72 = 0.0003
  11. Mitsubishi PLC with Fernhill SCADA

    Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
  12. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  13. Servo motor - vibration issue

    Hi I'm facing vibrating issue in servo motor (11KW) used in x axis, it makes noise while it stops after positioning. While positioning happend it operates smoothly, in the stand-by position only it starts vibrating. I'm using manual tunning mode (Abnormal noise occurs in jog operation and stand-by position only)    
  14. Hi fellow PLC veterans, I am new in the PLC world so please forgive me if my questions read dumb to you..   I am just wondering if there are any newer PLC machines that can: 1. keep the program even after its battery is completely flat or faulty  (Is this even possible?) 2. allow users to copy and save the program somewhere so one can install the program again without the need/presence of the machine supplier What tools/software may be required?   Thank you for reading and look forward to your response :)
  15. Hello All, I am currently stuck at fx2n 232bd which has to communicate with proface 4301tw hmi , although i have many hmi's available but i am unable to communicate this with hmi, almost tried every thing i just wanna know the exactly settings in gp-prox fig 1 ...  and fx cpu parameters anyone experienced guy ?? Help would be greatly Appriciated. Thanks
  16. GOT 2000 Buil-in Memory exceeding

    Hello Everyone I have an issue with a  Got 2000, im updating and adding some screens in  a old  HMI application with size was about 47 MB,  as im still updating i wanted to test the application  which now sizes about 52 MBbut is not possible due to the shortage of  ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited?   Thank you in advance
  17. Proface with Serial Printer

    Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks. 
  18. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  19. Hi all  I need help with communication between Mitsubishi L06CPU-P with Siemens S7-1500 by Modbus TCP. It's necessary to send data from L06CPU to S7-1500, but I don't know anything about mitsubishi and gx works2.  Picked up some pics how I did it, but I didn't verified how it works. Can anybody help me with this? https://ibb.co/8KDmg5x https://ibb.co/Jm8shCx   edited: I also found LQnUDEModbusTCP_GW2_with_FC_V120 library, but how it works I dont know
  20. hello dear team, im trying to make a back up for some FR-E700 with the FR CONFIGURATOR SW3 but when i start the communication with the USB cable the software cant recognize any port by the way im using windows 10 in my laptop and when i check the devices administrator it doesnt shows in USB ports the drive info just in other devices and in details shows: "USB device was not migrated" does anyone know what can i do?
  21. Hi,     I am trying to establish communication between master and slave through modbus rtu rs485. But I am experiencing error code 7378h. I already tried to make the values of Request Interval Timer from 100 to 200 and Broadcast Delat Value from 50 to 100. But the error still persist. Any tips how to solve this issue? There is no error on the slave evices.
  22. Hello everyone! I've installed GX works 3 according to the instructions in "https://plc4me.com/gx-works3-v1-308q-mitsubishi-full-real-100/". I don't get any errors, I can run the PLC and simulate completely OK. In the communication test, when the configuration is missing some components in the module list: Input, output, I / O module,... (https://ibb.co/ZVMcmQn) I hope you can answer for me?
  23. Dear members ,  1.)I have sensor which i read it from analog input (0-10v)  specific value and i will pas it via analog output (0-10) to controll VFD for air spped controll .  so i'd like to keep specific value for example i will set value 260  , so if analog read  les that this value than analog output increase voltage to analog output , if analog read more than this value output decrease voltage .  2.) i have Digital to analog register D8096 which 0 value means 0 volt and 4090 means 10v , so when i need to pas value to i make MOV D200 D8090 , is there a posibility to limit write value to D200 to not pass 4090 ?
  24. Q03UDVCPU Modbus Setup

    Hi Guys, I need help to set up modbus tcp/ip parameter for Q03UDVCPU, i want to use the predifined protocol and built in ethernet port. do you guys have some usefull references how to setup modbus tcp/ip, or is there any example program from mitsubishi? Thanks
  25. Designed a SCADA System using VB.NET. Everything working fine but coming to performance getting 2 to 3 seconds delay. Using FX3U32m Plc with ENET Module for Data reading and writing. I am having 200 addresses to read. Using MX Component as communication interface between PLC and SCADA. Is there any alternative or solution for this problem. Using one timer to read all data and update properties based on received data.    Thank you..